From: tosiara <tosiara@gmail.com>
To: linux-media@vger.kernel.org
Subject: RE: Problems with analog sound on Pinnacle Dazzle TV hybrid USB stick
Date: Sun, 13 Mar 2011 10:13:52 +0200 [thread overview]
Message-ID: <4D7C7CC0.2050804@gmail.com> (raw)
Hello,
I'm having similar issue with another em28xx based analog tv tuner: USB
KWorld PVR-TV 305U
I will start separate thread for my issue
Could you let me know what version of kernel and ALSA are you using?
Thanks,
tosiara
Cite:
-----------
Hi all,
I have read serveral newsgroups about this problem and did not find any
solution.
The closest to a solution was a suggestion to install a em28xx-new module but
it is no longer available.
I have loaded em28xx em28xx-alsa and em28xx-dvb with this output ( I have
forced the card on 56 using options em28xx card=56)
[51556.500765] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881,
interface 0, class 0)
[51556.500949] em28xx #0: chip ID is em2882/em2883
[51556.687042] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a
20 6a 00
[51556.687056] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02
02 00 00
[51556.687068] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b
1e 00 00
[51556.687080] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00
00 00 00
[51556.687091] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
[51556.687102] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
[51556.687114] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55
00 53 00
[51556.687125] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20
00 56 00
[51556.687137] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00
00 00 00
[51556.687148] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
[51556.687160] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
[51556.687171] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
[51556.687182] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
[51556.687194] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
[51556.687205] em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00
00 00 00
[51556.687216] em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00
00 00 00
[51556.687229] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb8846b20
[51556.687232] em28xx #0: EEPROM info:
[51556.687234] em28xx #0: AC97 audio (5 sample rates)
[51556.687236] em28xx #0: USB Remote wakeup capable
[51556.687238] em28xx #0: 500mA max power
[51556.687241] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000
[51556.687915] em28xx #0: Identified as Pinnacle Hybrid Pro (card=53)
[51556.690103] tvp5150 1-005c: chip found @ 0xb8 (em28xx #0)
[51556.694727] tuner 1-0061: chip found @ 0xc2 (em28xx #0)
[51556.694862] xc2028 1-0061: creating new instance
[51556.694864] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[51556.694872] usb 2-6: firmware: requesting xc3028-v27.fw
[51556.696352] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw,
type: xc2028 firmware, ver 2.7
[51556.752531] xc2028 1-0061: Loading firmware for type=BASE (1), id
0000000000000000.
[51557.679461] xc2028 1-0061: Loading firmware for type=(0), id
000000000000b700.
[51557.693080] SCODE (20000000), id 000000000000b700:
[51557.693088] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320
(60008000), id 0000000000008000.
[51557.900062] em28xx #0: Config register raw data: 0x58
[51557.900812] em28xx #0: AC97 vendor ID = 0xffffffff
[51557.901178] em28xx #0: AC97 features = 0x6a90
[51557.901181] em28xx #0: Empia 202 AC97 audio processor detected
[51558.050427] tvp5150 1-005c: tvp5150am1 detected.
[51558.153287] em28xx #0: v4l2 driver version 0.1.2
[51558.237283] em28xx #0: V4L2 video device registered as /dev/video1
[51558.237287] em28xx #0: V4L2 VBI device registered as /dev/vbi1
[51558.250087] usbcore: registered new interface driver em28xx
[51558.250092] em28xx driver loaded
[51558.420877] xc2028 1-0061: attaching existing instance
[51558.420881] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[51558.420884] em28xx #0/2: xc3028 attached
[51558.420888] DVB: registering new adapter (em28xx #0)
[51558.420893] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[51558.421536] Successfully loaded em28xx-dvb
[51558.421540] Em28xx: Initialized (Em28xx dvb Extension) extension
[51558.421968] Em28xx: Initialized (Em28xx Audio Extension) extension
[51560.520457] tvp5150 1-005c: tvp5150am1 detected.
[51561.024168] tvp5150 1-005c: tvp5150am1 detected.
[51561.332517] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
[51562.259446] (0), id 00000000000000ff:
[51562.259452] xc2028 1-0061: Loading firmware for type=(0), id
0000000100000007.
[51562.273059] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320
(60008000), id 0000000f0000000
I can get video. I see in alsa a third card (in fact I have a second internal
TV capture card)
But I cannot get sound out of it.
I used mplayer to play TV. I did get no errors about opening the card but
again no sound.
I used this command :
mplayer -tv
immediatemode=0:outfmt=yuy2:width=768:height=576:adevice=hw.2,0:forceaudio:alsa:amode=1:norm=PAL:normid=5:chanlist=europe-west:freq=203.25:device=/dev/video1:input=0
tv://
(I also tried hw.1,0 or /dev/dsp(x)
help greatly appreciated
Thx
W
next reply other threads:[~2011-03-13 8:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-13 8:13 tosiara [this message]
-- strict thread matches above, loose matches on Subject: below --
2011-03-12 16:37 Problems with analog sound on Pinnacle Dazzle TV hybrid USB stick wim delvaux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D7C7CC0.2050804@gmail.com \
--to=tosiara@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.