From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4D7DF910.5000706@domain.hid> Date: Mon, 14 Mar 2011 12:16:32 +0100 From: Johann Obermayr MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-15"; format="flowed" Content-Transfer-Encoding: quoted-printable Subject: [Xenomai-help] xnshadow_call_mayday no signal_handler call Reply-To: johann.obermayr@domain.hid List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: xenomai@xenomai.org Hello, if i call xnshadow_call_mayday for a realtime task with prio=3D0, the=20 signal_handler is not called. Xenomai 2.5.6, linux kernel 2.6.32.15. gcc 4.3.3 --=20 Mit freundlichen Gr=FC=DFen, best regards Johann Obermayr Software Entwicklung ________________________________________________ SIGMATEK GmbH& Co KG Sigmatekstra=DFe 1 5112 Lamprechtshausen =D6sterreich / Austria Tel. : +43 / 6274/ 43 21-0 (Durchwahl leider nicht m=F6glich) Fax : +43 / 6274/ 43 21-18 (bzw 300 im Werk 2 ) E-Mail: johann.obermayr@domain.hid http://www.sigmatek-automation.com ****************************Please note:******************************** This email and all attachments are confidential and intended solely for the person or entity to whom it is addressed. If you are not the named addressee you must not make this email and all attachments accessible to any other person. If you have received this email in error please delete it together with all attachments. ************************************************************************