From mboxrd@z Thu Jan 1 00:00:00 1970 Content-Type: multipart/mixed; boundary="===============5953680006132696301==" MIME-Version: 1.0 From: Denis Kenzior Subject: Re: Setting PDP mode Date: Mon, 14 Mar 2011 09:21:55 -0500 Message-ID: <4D7E2483.4010006@gmail.com> In-Reply-To: List-Id: To: ofono@ofono.org --===============5953680006132696301== Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Hi Mika, On 03/14/2011 05:13 AM, Mika.Liljeberg(a)nokia.com wrote: > Hi Denis, > = >> The protocol selection (IP, IPv6 or dual stack IPv4 & IPv6 = >> combined) is >> currently work in progress, but we support IP contexts already. = > = > If by "work in progress" you're referring to my IPv6 patches, the progres= s is pretty much stalled due to lack of response from you or Marcel for a c= ouple of months now. Are you planning to review and/or push the patches or = not? The next time I will send a patch, it will be to remove the work item = from the TODO list due to lack of interest from maintainers. > I would not describe it as a lack of interest. There were simply higher priority items and I wanted to discuss this with Samuel first anyway. I have reworked your IPv6 patches and the API 'slightly' and just now waiting on Marcel to cut a new release to push them. >> oFono does not allow you to select the actual protocol used to talk to >> the modem (e.g. PPP, high-speed, or some vendor specific) for gprs >> contexts. In fact it does not even care itself. It is up to = >> the modem >> driver to figure out the best protocol for that particular modem. > = > Just FYI, PPP is a valid PDP context type, where the PPP protocol termina= tes on the network side instead of in the modem. AFAIK, this configuration = is not widely supported by cellular operators, though. > = Fair enough, that makes sense now that you mention it. Regards, -Denis --===============5953680006132696301==--