Re: [Xenomai-core] NI analog card shows wrong IRQ number after reboot

[Anders Blomdell <anders.blomdell@domain.hid>]

On 2011-03-14 19.33, Anders Blomdell wrote:
> Which is due to the fact that pci_enable_device (mite.c) is called at mite_setup
> instead of mite_init. The bad thing with this, is that interrupt conflicts can
> only be found AFTER the driver has been started with analogy_config, which is
> often too late (since interrupt conflicts will bring down the machine).
> 
> Would it be a good idea to pci_enable_device in mite_init as well, or will that
> break something else?

Many other kernel driver seems to call pci_enable_device from the probe
function, and this does give the card it's proper IRQ:

--- ksrc/drivers/analogy/national_instruments/mite.c.orig   2011-02-16
15:26:01.000000000 +0100
+++ ksrc/drivers/analogy/national_instruments/mite.c    2011-03-14
19:38:18.572674136 +0100
@@ -80,6 +80,7 @@
        }

        list_add(&mite->list, &mite_devices);
+       pci_enable_device(mite->pcidev);

        return 0;
 }

Regards

Anders


-- 
Anders Blomdell                  Email: anders.blomdell@domain.hid
Department of Automatic Control
Lund University                  Phone:    +46 46 222 4625
P.O. Box 118                     Fax:      +46 46 138118
SE-221 00 Lund, Sweden