From: Mark Lord <kernel@teksavvy.com>
To: Tejun Heo <tj@kernel.org>
Cc: Robert Hancock <hancockrwd@gmail.com>,
Peter <elekesp@freemail.hu>,
linux-ide@vger.kernel.org
Subject: Re: sata problem...
Date: Mon, 14 Mar 2011 15:22:13 -0400 [thread overview]
Message-ID: <4D7E6AE5.7080709@teksavvy.com> (raw)
In-Reply-To: <20110313084236.GH2005@htj.dyndns.org>
On 11-03-13 04:42 AM, Tejun Heo wrote:
> On Sat, Mar 12, 2011 at 08:10:51PM -0600, Robert Hancock wrote:
>>> I dont know why there is "[ 2.098493] ata4.00: failed command: READ FPDMA QUEUED" in dmesg.
>>>
>>> I have 3 WD Green 1TB HDD, and I samsung 160GB HDD.
>>> 1 SAMSUNG and 1 WD on the intel SATA,
>>> 2 WD on the GIGABYTE Sata.
>>> I think the problem is only with the gigabye sata port.
>>
>> That's an uncorrectable read error the drive is reporting. Most
>> likely that hard drive is failing.
>
> Or maybe just a bad sector, in which case just writing it over would
> cause the drive to reallocate the failed region. I think this
> partial/transient failure mode is much more common than the whole
> drive going south.
One would think so! :)
But in my experience, the latter just about always follows the former
within a surprisingly short amount of time (weeks).
Cheers
next prev parent reply other threads:[~2011-03-14 19:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <04BB68BD-352B-45B0-A7FC-42B6005A80B3@freemail.hu>
[not found] ` <20110227153338.GA23527@mtj.dyndns.org>
2011-03-12 20:33 ` sata problem Peter
2011-03-13 2:10 ` Robert Hancock
2011-03-13 8:42 ` Tejun Heo
2011-03-14 19:22 ` Mark Lord [this message]
2005-10-31 9:34 Luca
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D7E6AE5.7080709@teksavvy.com \
--to=kernel@teksavvy.com \
--cc=elekesp@freemail.hu \
--cc=hancockrwd@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.