[U-Boot] [PATCH v2 3/5] I2C: add i2c support for Pantheon platform

[Heiko Schocher <hs@denx.de>]

Hello Lei,

Lei Wen wrote:
> Add i2c support to dkb board with pantheon soc.
> 
> Signed-off-by: Lei Wen <leiwen@marvell.com>
> ---
>  arch/arm/cpu/arm926ejs/pantheon/cpu.c    |   10 ++++++++++
>  arch/arm/include/asm/arch-pantheon/cpu.h |    4 +++-
>  arch/arm/include/asm/arch-pantheon/mfp.h |    2 ++
>  board/Marvell/dkb/dkb.c                  |    4 ++++
>  include/configs/dkb.h                    |   11 +++++++++++
>  5 files changed, 30 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/cpu/arm926ejs/pantheon/cpu.c b/arch/arm/cpu/arm926ejs/pantheon/cpu.c
> index 9ddc77c..88ecfae 100644
> --- a/arch/arm/cpu/arm926ejs/pantheon/cpu.c
> +++ b/arch/arm/cpu/arm926ejs/pantheon/cpu.c
> @@ -59,6 +59,10 @@ int arch_cpu_init(void)
>  	/* Enable GPIO clock */
>  	writel(APBC_APBCLK, &apbclkres->gpio);
>  
> +	/* Enable I2C clock */
> +	writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi);
> +	writel(APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi);
> +
>  	icache_enable();
>  
>  	return 0;
> @@ -76,3 +80,9 @@ int print_cpuinfo(void)
>  	return 0;
>  }
>  #endif
> +
> +#ifdef CONFIG_I2C_MV
> +void i2c_clk_enable (void)
> +{
> +}
> +#endif
> diff --git a/arch/arm/include/asm/arch-pantheon/cpu.h b/arch/arm/include/asm/arch-pantheon/cpu.h
> index 30f4393..60955c5 100644
> --- a/arch/arm/include/asm/arch-pantheon/cpu.h
> +++ b/arch/arm/include/asm/arch-pantheon/cpu.h
> @@ -50,7 +50,9 @@ struct panthapb_registers {
>  	u32 uart0;	/*0x000*/
>  	u32 uart1;	/*0x004*/
>  	u32 gpio;	/*0x008*/
> -	u8 pad0[0x034 - 0x08 - 4];
> +	u8 pad0[0x02c - 0x08 - 4];
> +	u32 twsi;	/*0x02c*/
> +	u8 pad1[0x034 - 0x2c - 4];
>  	u32 timers;	/*0x034*/
>  };
>  
> diff --git a/arch/arm/include/asm/arch-pantheon/mfp.h b/arch/arm/include/asm/arch-pantheon/mfp.h
> index fb291cf..041e64c 100644
> --- a/arch/arm/include/asm/arch-pantheon/mfp.h
> +++ b/arch/arm/include/asm/arch-pantheon/mfp.h
> @@ -34,6 +34,8 @@
>  /* UART2 */
>  #define MFP47_UART2_RXD		MFP_REG(0x198) | MFP_AF6 | MFP_DRIVE_MEDIUM
>  #define MFP48_UART2_TXD		MFP_REG(0x19c) | MFP_AF6 | MFP_DRIVE_MEDIUM
> +#define MFP53_CI2C_SCL		MFP_REG(0x1b0) | MFP_AF2 | MFP_DRIVE_MEDIUM
> +#define MFP54_CI2C_SDA		MFP_REG(0x1b4) | MFP_AF2 | MFP_DRIVE_MEDIUM

Please add braces around this multiple or concatenation

>  /* More macros can be defined here... */
>  
> diff --git a/board/Marvell/dkb/dkb.c b/board/Marvell/dkb/dkb.c
> index 72a2d2a..00f73e7 100644
> --- a/board/Marvell/dkb/dkb.c
> +++ b/board/Marvell/dkb/dkb.c
> @@ -36,6 +36,10 @@ int board_early_init_f(void)
>  		MFP47_UART2_RXD,
>  		MFP48_UART2_TXD,
>  
> +		/* I2C */
> +		MFP53_CI2C_SCL,
> +		MFP54_CI2C_SDA,
> +
>  		MFP_EOC		/*End of configureation*/
>  	};
>  	/* configure MFP's */
> diff --git a/include/configs/dkb.h b/include/configs/dkb.h
> index 638af5e..75c4b99 100644
> --- a/include/configs/dkb.h
> +++ b/include/configs/dkb.h
> @@ -56,6 +56,17 @@
>  #include "mv-common.h"
>  
>  #undef CONFIG_ARCH_MISC_INIT
> +
> +/*
> + * I2C definition
> + */
> +#define CONFIG_CMD_I2C
> +#define CONFIG_I2C_MV			1
> +#define CONFIG_PXA_I2C_REG		0xd4011000
> +#define CONFIG_HARD_I2C			1
> +#define CONFIG_SYS_I2C_SPEED		0
> +#define CONFIG_SYS_I2C_SLAVE		0xfe
> +
>  /*
>   * Environment variables configurations
>   */

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany