* [PATCH v2 1/1] Add core support for QQ2440.
[not found] <20110314131837.540942890@gmail.com>
@ 2011-03-14 13:23 ` Domenico Andreoli
2011-03-15 17:59 ` Jamie Iles
2011-03-15 18:36 ` Lars-Peter Clausen
0 siblings, 2 replies; 3+ messages in thread
From: Domenico Andreoli @ 2011-03-14 13:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Domenico Andreoli <cavokz@gmail.com>
QQ2440 is a ARM based development board. It is commonly found together
with LCD displays but mine was not so I am not able to support it yet.
Network support is added by another patch.
This patch applies cleanly to 2.6.38-rc8.
Signed-off-by: Domenico Andreoli <cavokz@gmail.com>
---
I'm not sure how to manage the dependency of patch to CS89x0 network
driver, it would build only if this patch is already applied but how
to enforce it? BTW that is a networking patch so it has to be reviewed
by netdev people.
MAINTAINERS | 7
arch/arm/mach-s3c2440/Kconfig | 12
arch/arm/mach-s3c2440/Makefile | 1
arch/arm/mach-s3c2440/mach-qq2440.c | 358 ++++++++++++++++++++++++++
4 files changed, 378 insertions(+)
Index: arm-2.6.git/arch/arm/mach-s3c2440/Kconfig
===================================================================
--- arm-2.6.git.orig/arch/arm/mach-s3c2440/Kconfig 2011-03-12 20:56:10.000000000 +0000
+++ arm-2.6.git/arch/arm/mach-s3c2440/Kconfig 2011-03-12 20:56:43.000000000 +0000
@@ -190,6 +190,19 @@
Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
available via various sources. It can come with a 3.5" or 7" touch LCD.
+config MACH_QQ2440
+ bool "QQ2440 development board"
+ select CPU_S3C2440
+ select EEPROM_AT24
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LEDS_TRIGGER
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ select S3C2440_XTAL_12000000
+ help
+ Say Y here to select support for the QQ2440
+
config MACH_RX1950
bool "HP iPAQ rx1950"
select CPU_S3C2442
Index: arm-2.6.git/arch/arm/mach-s3c2440/Makefile
===================================================================
--- arm-2.6.git.orig/arch/arm/mach-s3c2440/Makefile 2011-03-12 20:56:10.000000000 +0000
+++ arm-2.6.git/arch/arm/mach-s3c2440/Makefile 2011-03-12 20:56:43.000000000 +0000
@@ -33,6 +33,7 @@
obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+obj-$(CONFIG_MACH_QQ2440) += mach-qq2440.o
obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
Index: arm-2.6.git/arch/arm/mach-s3c2440/mach-qq2440.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ arm-2.6.git/arch/arm/mach-s3c2440/mach-qq2440.c 2011-03-12 20:56:43.000000000 +0000
@@ -0,0 +1,372 @@
+/* linux/arch/arm/mach-s3c2440/mach-qq2440.c
+ *
+ * Copyright (c) 2011 Domenico Andreoli <cavokz@gmail.com>
+ *
+ * Based on mach-mini2440.c by Michel Pollet <buserror@gmail.com>,
+ * Ramax Lo <ramaxlo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/serial_core.h>
+#include <linux/i2c/at24.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/mmc/host.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/irqs.h>
+#include <mach/qq2440.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+#include <plat/mci.h>
+#include <plat/udc.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include <sound/s3c24xx_uda134x.h>
+
+static struct map_desc qq2440_iodesc[] __initdata = {
+ {
+ .virtual = QQ2440_CS8900_VIRT_BASE,
+ .pfn = __phys_to_pfn(QQ2440_CS8900_PA),
+ .length = QQ2440_CS8900_SZ,
+ .type = MT_DEVICE
+ }
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg qq2440_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+/* UDC */
+
+static void qq2440_udc_pullup(enum s3c2410_udc_cmd_e cmd)
+{
+ pr_debug("udc: pullup(%d)\n", cmd);
+
+ switch (cmd) {
+ case S3C2410_UDC_P_ENABLE:
+ gpio_set_value(S3C2410_GPG(12), 1);
+ break;
+ case S3C2410_UDC_P_DISABLE:
+ gpio_set_value(S3C2410_GPG(12), 0);
+ break;
+ case S3C2410_UDC_P_RESET:
+ break;
+ default:
+ break;
+ }
+}
+
+static struct s3c2410_udc_mach_info qq2440_udc_cfg __initdata = {
+ .udc_command = qq2440_udc_pullup,
+};
+
+/* MMC/SD */
+
+static struct s3c24xx_mci_pdata qq2440_mmc_cfg __initdata = {
+ .gpio_detect = S3C2410_GPG(8),
+ .gpio_wprotect = S3C2410_GPH(8),
+ .set_power = NULL,
+ .ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+/* NAND */
+
+static struct mtd_partition qq2440_default_nand_part[] __initdata = {
+ [0] = {
+ .name = "vivi",
+ .size = SZ_128K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "eboot",
+ .size = SZ_128K,
+ .offset = MTDPART_OFS_APPEND,
+ },
+ [2] = {
+ .name = "param",
+ .size = SZ_64K,
+ .offset = MTDPART_OFS_APPEND,
+ },
+ [3] = {
+ .name = "kernel",
+ .size = SZ_2M,
+ .offset = MTDPART_OFS_APPEND,
+ },
+ [4] = {
+ .name = "root",
+ .size = 0x03dac000,
+ .offset = MTDPART_OFS_APPEND,
+ },
+};
+
+static struct s3c2410_nand_set qq2440_nand_sets[] __initdata = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(qq2440_default_nand_part),
+ .partitions = qq2440_default_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand qq2440_nand_info __initdata = {
+ .tacls = 0,
+ .twrph0 = 25,
+ .twrph1 = 15,
+ .nr_sets = ARRAY_SIZE(qq2440_nand_sets),
+ .sets = qq2440_nand_sets,
+ .ignore_unset_ecc = 1,
+};
+
+/* KEYS */
+
+static struct gpio_keys_button qq2440_buttons[] = {
+ {
+ .gpio = S3C2410_GPG(11), /* K1 */
+ .code = KEY_F1,
+ .desc = "Button 1",
+ .active_low = 1,
+ }, {
+ .gpio = S3C2410_GPG(3), /* K2 */
+ .code = KEY_F2,
+ .desc = "Button 2",
+ .active_low = 1,
+ }, {
+ .gpio = S3C2410_GPF(2), /* K3 */
+ .code = KEY_F3,
+ .desc = "Button 3",
+ .active_low = 1,
+ }, {
+ .gpio = S3C2410_GPF(0), /* K4 */
+ .code = KEY_F4,
+ .desc = "Button 4",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data qq2440_button_data = {
+ .buttons = qq2440_buttons,
+ .nbuttons = ARRAY_SIZE(qq2440_buttons),
+};
+
+static struct platform_device qq2440_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &qq2440_button_data,
+ }
+};
+
+/* LEDS */
+
+static struct s3c24xx_led_platdata qq2440_led1_pdata = {
+ .name = "led1",
+ .gpio = S3C2410_GPB(5),
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .def_trigger = "heartbeat",
+};
+
+static struct s3c24xx_led_platdata qq2440_led2_pdata = {
+ .name = "led2",
+ .gpio = S3C2410_GPB(6),
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .def_trigger = "nand-disk",
+};
+
+static struct s3c24xx_led_platdata qq2440_led3_pdata = {
+ .name = "led3",
+ .gpio = S3C2410_GPB(7),
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .def_trigger = "mmc0",
+};
+
+static struct s3c24xx_led_platdata qq2440_led4_pdata = {
+ .name = "led4",
+ .gpio = S3C2410_GPB(8),
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .def_trigger = "",
+};
+
+static struct platform_device qq2440_led1 = {
+ .name = "s3c24xx_led",
+ .id = 1,
+ .dev = {
+ .platform_data = &qq2440_led1_pdata,
+ },
+};
+
+static struct platform_device qq2440_led2 = {
+ .name = "s3c24xx_led",
+ .id = 2,
+ .dev = {
+ .platform_data = &qq2440_led2_pdata,
+ },
+};
+
+static struct platform_device qq2440_led3 = {
+ .name = "s3c24xx_led",
+ .id = 3,
+ .dev = {
+ .platform_data = &qq2440_led3_pdata,
+ },
+};
+
+static struct platform_device qq2440_led4 = {
+ .name = "s3c24xx_led",
+ .id = 4,
+ .dev = {
+ .platform_data = &qq2440_led4_pdata,
+ },
+};
+
+/* AUDIO */
+
+static struct s3c24xx_uda134x_platform_data qq2440_audio_pins = {
+ .l3_clk = S3C2410_GPB(4),
+ .l3_mode = S3C2410_GPB(2),
+ .l3_data = S3C2410_GPB(3),
+ .model = UDA134X_UDA1341
+};
+
+static struct platform_device qq2440_audio = {
+ .name = "s3c24xx_uda134x",
+ .id = 0,
+ .dev = {
+ .platform_data = &qq2440_audio_pins,
+ },
+};
+
+/* I2C */
+
+static struct at24_platform_data at24c08 = {
+ .byte_len = SZ_8K / 8,
+ .page_size = 16,
+};
+
+static struct i2c_board_info qq2440_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("24c08", 0x50),
+ .platform_data = &at24c08,
+ },
+};
+
+static struct platform_device *qq2440_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_rtc,
+ &s3c_device_usbgadget,
+ &qq2440_led1,
+ &qq2440_led2,
+ &qq2440_led3,
+ &qq2440_led4,
+ &qq2440_button_device,
+ &s3c_device_nand,
+ &s3c_device_sdi,
+ &s3c_device_iis,
+ &qq2440_audio,
+};
+
+static void __init qq2440_map_io(void)
+{
+ s3c24xx_init_io(qq2440_iodesc, ARRAY_SIZE(qq2440_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(qq2440_uartcfgs, ARRAY_SIZE(qq2440_uartcfgs));
+}
+
+#define QQ2440_CS8900_BANKCON (S3C2410_BANKCON_Tacp6 | S3C2410_BANKCON_Tcah4 | S3C2410_BANKCON_Tcoh1 | \
+ S3C2410_BANKCON_Tacc14 | S3C2410_BANKCON_Tcos4)
+
+static void __init qq2440_init(void)
+{
+ int i;
+
+ /* Ethernet */
+ __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_WS3 | S3C2410_BWSCON_ST3, S3C2410_BWSCON);
+ __raw_writel(QQ2440_CS8900_BANKCON, S3C2410_BANKCON3);
+ set_irq_type(QQ2440_CS8900_IRQ, IRQ_TYPE_EDGE_RISING);
+
+ /* mark the key as input, without pullups (there is one on the board) */
+ for (i = 0; i < ARRAY_SIZE(qq2440_buttons); i++) {
+ s3c_gpio_setpull(qq2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(qq2440_buttons[i].gpio, S3C2410_GPIO_INPUT);
+ }
+
+ /* Make sure the D+ pullup pin is output */
+ if (!WARN_ON(gpio_request(S3C2410_GPG(12), "udc pup"))) {
+ gpio_direction_output(S3C2410_GPG(12), 0);
+ s3c24xx_udc_set_platdata(&qq2440_udc_cfg);
+ }
+
+ s3c24xx_mci_set_platdata(&qq2440_mmc_cfg);
+ s3c_nand_set_platdata(&qq2440_nand_info);
+
+ s3c_i2c0_set_platdata(NULL);
+ i2c_register_board_info(0, qq2440_i2c_devs, ARRAY_SIZE(qq2440_i2c_devs));
+
+ platform_add_devices(qq2440_devices, ARRAY_SIZE(qq2440_devices));
+}
+
+MACHINE_START(QQ2440, "QQ2440")
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .map_io = qq2440_map_io,
+ .init_machine = qq2440_init,
+ .init_irq = s3c24xx_init_irq,
+ .timer = &s3c24xx_timer,
+MACHINE_END
Index: arm-2.6.git/MAINTAINERS
===================================================================
--- arm-2.6.git.orig/MAINTAINERS 2011-03-12 20:56:10.000000000 +0000
+++ arm-2.6.git/MAINTAINERS 2011-03-12 20:56:43.000000000 +0000
@@ -945,6 +945,13 @@
W: http://www.arm.linux.org.uk/
S: Maintained
+ARM/QQ2440 MACHINE SUPPORT
+M: Domenico Andreoli <cavokz@gmail.com>
+L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-s3c2440/include/mach/qq2440.h
+F: arch/arm/mach-s3c2440/mach-qq2440.c
+
ARM/RADISYS ENP2611 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
Index: arm-2.6.git/arch/arm/mach-s3c2440/include/mach/qq2440.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ arm-2.6.git/arch/arm/mach-s3c2440/include/mach/qq2440.h 2011-03-12 20:56:43.000000000 +0000
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-s3c2440/include/mach/qq2440.h
+ *
+ * Copyright (c) 2011 Domenico Andreoli <cavokz@gmail.com>
+ *
+ * QQ2440 - platform definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_MACH_QQ2440_H
+#define __ASM_MACH_QQ2440_H
+
+#define QQ2440_CS8900_IRQ IRQ_EINT9
+
+#define QQ2440_CS8900_VIRT_BASE ((unsigned long) S3C_ADDR(0x00500000))
+#define QQ2440_CS8900_PA (S3C2410_CS3 + 0x1000000)
+#define QQ2440_CS8900_SZ SZ_1M
+
+#endif /* __ASM_MACH_QQ2440_H */
^ permalink raw reply [flat|nested] 3+ messages in thread