From: Denis Kenzior <denkenz@gmail.com>
To: ofono@ofono.org
Subject: Re: [PATCH 2/4] emulator: add call and callsetup indicators
Date: Thu, 17 Mar 2011 16:14:43 -0500 [thread overview]
Message-ID: <4D8279C3.7020007@gmail.com> (raw)
In-Reply-To: <1300380656-8757-3-git-send-email-frederic.danis@linux.intel.com>
[-- Attachment #1: Type: text/plain, Size: 6785 bytes --]
Hi Frédéric,
On 03/17/2011 11:50 AM, Frédéric Danis wrote:
> ---
> src/emulator.c | 3 ++
> src/voicecall.c | 86 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 89 insertions(+), 0 deletions(-)
>
> diff --git a/src/emulator.c b/src/emulator.c
> index c84f0a9..864e50b 100644
> --- a/src/emulator.c
> +++ b/src/emulator.c
> @@ -455,6 +455,9 @@ void ofono_emulator_register(struct ofono_emulator *em, int fd)
>
> if (em->type == OFONO_EMULATOR_TYPE_HFP) {
> emulator_add_indicator(em, OFONO_EMULATOR_IND_SERVICE, 0, 1, 0);
> + emulator_add_indicator(em, OFONO_EMULATOR_IND_CALL, 0, 1, 0);
> + emulator_add_indicator(em, OFONO_EMULATOR_IND_CALLSETUP, 0, 3,
> + 0);
> emulator_add_indicator(em, OFONO_EMULATOR_IND_SIGNAL, 0, 5, 0);
> emulator_add_indicator(em, OFONO_EMULATOR_IND_ROAMING, 0, 1, 0);
> emulator_add_indicator(em, OFONO_EMULATOR_IND_BATTERY, 0, 5, 5);
> diff --git a/src/voicecall.c b/src/voicecall.c
> index cb5258d..d0ddad6 100644
> --- a/src/voicecall.c
> +++ b/src/voicecall.c
> @@ -59,6 +59,7 @@ struct ofono_voicecall {
> struct dial_request *dial_req;
> GQueue *toneq;
> guint tone_source;
> + unsigned int hfp_watch;
> };
>
> struct voicecall {
> @@ -692,6 +693,55 @@ static void voicecall_emit_multiparty(struct voicecall *call, gboolean mpty)
> &val);
> }
>
> +static void notify_emulator_call_status_cb(struct ofono_atom *atom, void *data)
> +{
> + struct ofono_emulator *em = __ofono_atom_get_data(atom);
> +
> + switch (GPOINTER_TO_INT(data)) {
> + case CALL_STATUS_ACTIVE:
> + ofono_emulator_set_indicator(em, OFONO_EMULATOR_IND_CALL,
> + OFONO_EMULATOR_CALL_ACTIVE);
> + ofono_emulator_set_indicator(em, OFONO_EMULATOR_IND_CALLSETUP,
> + OFONO_EMULATOR_CALLSETUP_INACTIVE);
> + break;
> +
> + case CALL_STATUS_DIALING:
> + ofono_emulator_set_indicator(em, OFONO_EMULATOR_IND_CALLSETUP,
> + OFONO_EMULATOR_CALLSETUP_OUTGOING);
> + break;
> +
> + case CALL_STATUS_ALERTING:
> + ofono_emulator_set_indicator(em, OFONO_EMULATOR_IND_CALLSETUP,
> + OFONO_EMULATOR_CALLSETUP_ALERTING);
> + break;
> +
> + case CALL_STATUS_INCOMING:
> + ofono_emulator_set_indicator(em, OFONO_EMULATOR_IND_CALLSETUP,
> + OFONO_EMULATOR_CALLSETUP_INCOMING);
> + break;
> +
> + case CALL_STATUS_DISCONNECTED:
> + ofono_emulator_set_indicator(em, OFONO_EMULATOR_IND_CALL,
> + OFONO_EMULATOR_CALL_INACTIVE);
> + ofono_emulator_set_indicator(em, OFONO_EMULATOR_IND_CALLSETUP,
> + OFONO_EMULATOR_CALLSETUP_INACTIVE);
> + break;
> +
> + case CALL_STATUS_WAITING:
> + case CALL_STATUS_HELD:
> + break;
> + }
> +}
> +
So I don't think this will really work once you introduce multiparty
calls. The indicators depend on the state of all calls, not just one
particular call. As an example, you can have one party of an active
mpty drop which would cause 'call' to go to inactive, even though you
still have other calls active.
In addition, waiting calls should trigger a callsetup=1. See 4.22.1.
You might have to put the logic into voicecall.c itself. Something like:
if (have_dialing)
callsetup = 2
elif (have_alerting)
callsetup = 3
elif (have_incoming || have_waiting)
callsetup = 1
else
callsetup = 0
And you have to pay very close attention to the order in which the
indicators are reported. Look at the logic inside
drivers/hfpmodem/voicecall.c for what we expect, the BT HFP1.5 diagrams and
> +static void notify_emulator_call_status(struct ofono_voicecall *vc, int status)
> +{
> + struct ofono_modem *modem = __ofono_atom_get_modem(vc->atom);
> +
> + __ofono_modem_foreach_atom(modem, OFONO_ATOM_TYPE_EMULATOR_HFP,
> + notify_emulator_call_status_cb,
> + GINT_TO_POINTER(status));
> +}
> +
> static void voicecall_set_call_status(struct voicecall *call, int status)
> {
> DBusConnection *conn = ofono_dbus_get_connection();
> @@ -714,6 +764,8 @@ static void voicecall_set_call_status(struct voicecall *call, int status)
> "State", DBUS_TYPE_STRING,
> &status_str);
>
> + notify_emulator_call_status(call->vc, status);
> +
> if (status == CALL_STATUS_ACTIVE &&
> (old_status == CALL_STATUS_INCOMING ||
> old_status == CALL_STATUS_DIALING ||
> @@ -1043,6 +1095,8 @@ static void voicecalls_emit_call_added(struct ofono_voicecall *vc,
> DBusMessageIter dict;
> const char *path;
>
> + notify_emulator_call_status(vc, v->call->status);
> +
> path = __ofono_atom_get_path(vc->atom);
>
> signal = dbus_message_new_signal(path,
> @@ -2188,6 +2242,10 @@ static void voicecall_unregister(struct ofono_atom *atom)
> const char *path = __ofono_atom_get_path(atom);
> GSList *l;
>
> + notify_emulator_call_status(vc, CALL_STATUS_DISCONNECTED);
> +
> + __ofono_modem_remove_atom_watch(modem, vc->hfp_watch);
> +
> if (vc->sim_watch) {
> __ofono_modem_remove_atom_watch(modem, vc->sim_watch);
> vc->sim_watch = 0;
> @@ -2362,6 +2420,30 @@ static void sim_watch(struct ofono_atom *atom,
> sim_state_watch(ofono_sim_get_state(sim), vc);
> }
>
> +static void emulator_hfp_watch(struct ofono_atom *atom,
> + enum ofono_atom_watch_condition cond,
> + void *data)
> +{
> + struct ofono_voicecall *vc = data;
> +
> + if (cond == OFONO_ATOM_WATCH_CONDITION_REGISTERED) {
> + if (voicecalls_have_with_status(vc, CALL_STATUS_ACTIVE))
> + notify_emulator_call_status(vc, CALL_STATUS_ACTIVE);
> +
> + if (voicecalls_have_with_status(vc, CALL_STATUS_DIALING))
> + notify_emulator_call_status(vc, CALL_STATUS_DIALING);
> + else if (voicecalls_have_with_status(vc, CALL_STATUS_ALERTING))
> + notify_emulator_call_status(vc, CALL_STATUS_ALERTING);
> + else if (voicecalls_have_with_status(vc, CALL_STATUS_INCOMING))
> + notify_emulator_call_status(vc, CALL_STATUS_INCOMING);
> + else if (voicecalls_have_with_status(vc, CALL_STATUS_WAITING))
> + notify_emulator_call_status(vc, CALL_STATUS_WAITING);
> +
> + if (voicecalls_have_with_status(vc, CALL_STATUS_HELD))
> + notify_emulator_call_status(vc, CALL_STATUS_HELD);
> + }
> +}
> +
> void ofono_voicecall_register(struct ofono_voicecall *vc)
> {
> DBusConnection *conn = ofono_dbus_get_connection();
> @@ -2398,6 +2480,10 @@ void ofono_voicecall_register(struct ofono_voicecall *vc)
> sim_watch(sim_atom, OFONO_ATOM_WATCH_CONDITION_REGISTERED, vc);
>
> __ofono_atom_register(vc->atom, voicecall_unregister);
> +
> + vc->hfp_watch = __ofono_modem_add_atom_watch(modem,
> + OFONO_ATOM_TYPE_EMULATOR_HFP,
> + emulator_hfp_watch, vc, NULL);
> }
>
> void ofono_voicecall_remove(struct ofono_voicecall *vc)
Regards,
-Denis
next prev parent reply other threads:[~2011-03-17 21:14 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-17 16:50 [PATCH 0/4] HFP: add call, callsetup indicators and +COPS support =?unknown-8bit?q?Fr=C3=A9d=C3=A9ric?= Danis
2011-03-17 16:50 ` [PATCH 1/4] emulator: add defines for call and callsetup indicators =?unknown-8bit?q?Fr=C3=A9d=C3=A9ric?= Danis
2011-03-17 16:50 ` [PATCH 2/4] emulator: add " =?unknown-8bit?q?Fr=C3=A9d=C3=A9ric?= Danis
2011-03-17 21:14 ` Denis Kenzior [this message]
2011-03-17 16:50 ` [PATCH 3/4] emulator: add API to set network mode and name =?unknown-8bit?q?Fr=C3=A9d=C3=A9ric?= Danis
2011-03-17 21:15 ` Denis Kenzior
2011-03-17 16:50 ` [PATCH 4/4] emulator: add +COPS support =?unknown-8bit?q?Fr=C3=A9d=C3=A9ric?= Danis
2011-03-17 21:18 ` Denis Kenzior
2011-03-18 9:13 ` Frederic Danis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D8279C3.7020007@gmail.com \
--to=denkenz@gmail.com \
--cc=ofono@ofono.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.