From: Piotr Hosowicz <piotr@hosowicz.com>
To: LKML <linux-kernel@vger.kernel.org>
Subject: Re: No networking since git3
Date: Sat, 19 Mar 2011 15:35:09 +0100 [thread overview]
Message-ID: <4D84BF1D.2010407@example.com> (raw)
In-Reply-To: <4D84A46B.1000407@example.com>
[-- Attachment #1: Type: text/plain, Size: 938 bytes --]
On 19.03.2011 13:41, Piotr Hosowicz wrote:
> Hello,
>
> I wrote lately, the problem persists, that's why I write again. I tested
> git7 just now and it still does not work.
>
> What are the the symptoms? Straight after booting (Debian 6) mii-tool
> shows no link for the NICs. I attach ethtool eth0 output from this
> moment, also a good boot with git3 marked as GOOD. I attach also lspci
> output, with -vv and with no options.
I attach my dmesgs now. BAD (still) is for git8, GOOD is for git3.
Regards,
Piotr Hosowicz
--
Miss World 2006: Jestem szczęśliwa, że mogę wspaniale uczestniczyć w
przeżyciu najpiękniejszych kobiet tutaj w Warszawie, gdzie Jan Paweł II,
papież, w Polsce, skąd pochodzi. Spotkałam się z Kościołem Mariackim
w Krakowie, który ciepło ludzi i wielka przyjaźń. Połowa mojego serca
zostanie w Polsce, a druga połowa pojedzie ze mną do mojego kraju.
NP: Big Big Train - Master James Of St George
NB: 2.6.38-git3
[-- Attachment #2: dmesg.BAD.txt --]
[-- Type: text/plain, Size: 87976 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-git8 (root@aapi205) (gcc version 4.4.5 (Debian 4.4.5-10) ) #1 SMP PREEMPT Sat Mar 19 14:50:31 CET 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.38-git8 root=UUID=cdb6c166-b027-4a29-87fa-93d604dc5e53 ro all_generic_ata quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee2000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. EP45-UD3/EP45-UD3, BIOS F10b 08/05/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 100000000 mask FE0000000 write-back
[ 0.000000] 3 base 0DFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f5670] f5670
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfee0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfee0000 @ dfeda000-dfee0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ 11fffa000-120000000
[ 0.000000] RAMDISK: 3754e000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f7080 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000dfee2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000dfee20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000dfee2180 04D29 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000dfee0000 00040
[ 0.000000] ACPI: HPET 00000000dfee7000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000dfee7080 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: EUDS 00000000dfee70c0 004D0 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000dfee7590 06852 (v01 GBT GBT B0 5455312E BG?? 00020101)
[ 0.000000] ACPI: APIC 00000000dfee6f00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000dfeee720 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011ffeb000 - 000000011fff9fff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b600000-ffff88011effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfee0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048175
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 898840 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee2000
[ 0.000000] PM: Registered nosave memory: 00000000dfee2000 - 00000000dfef0000
[ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:14100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s79488 r8192 d22912 u524288
[ 0.000000] pcpu-alloc: s79488 r8192 d22912 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032042
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-git8 root=UUID=cdb6c166-b027-4a29-87fa-93d604dc5e53 ro all_generic_ata quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4047080k/4718592k available (3223k kernel code, 525892k absent, 145620k reserved, 3668k data, 584k init)
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2332.774 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4665.54 BogoMIPS (lpj=9331096)
[ 0.004008] pid_max: default: 32768 minimum: 301
[ 0.004061] Security Framework initialized
[ 0.004071] SELinux: Disabled at boot.
[ 0.004407] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008112] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008801] Mount-cache hash table entries: 256
[ 0.008942] Initializing cgroup subsys ns
[ 0.008945] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.008948] Initializing cgroup subsys cpuacct
[ 0.008953] Initializing cgroup subsys devices
[ 0.008955] Initializing cgroup subsys blkio
[ 0.008995] CPU: Physical Processor ID: 0
[ 0.008997] CPU: Processor Core ID: 0
[ 0.008999] mce: CPU supports 6 MCE banks
[ 0.009007] CPU0: Thermal monitoring enabled (TM2)
[ 0.009011] using mwait in idle threads.
[ 0.009779] ACPI: Core revision 20110112
[ 0.012954] Setting APIC routing to flat
[ 0.013256] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052951] CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 07
[ 0.056003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.056003] ... version: 2
[ 0.056003] ... bit width: 40
[ 0.056003] ... generic registers: 2
[ 0.056003] ... value mask: 000000ffffffffff
[ 0.056003] ... max period: 000000007fffffff
[ 0.056003] ... fixed-purpose events: 3
[ 0.056003] ... event mask: 0000000700000003
[ 0.076022] Booting Node 0, Processors #1
[ 0.076026] smpboot cpu 1: start_ip = 9a000
[ 0.176031] #2
[ 0.176033] smpboot cpu 2: start_ip = 9a000
[ 0.276046] #3 Ok.
[ 0.276049] smpboot cpu 3: start_ip = 9a000
[ 0.368031] Brought up 4 CPUs
[ 0.368034] Total of 4 processors activated (18663.81 BogoMIPS).
[ 0.369333] devtmpfs: initialized
[ 0.374376] print_constraints: dummy:
[ 0.374376] NET: Registered protocol family 16
[ 0.376084] ACPI: bus type pci registered
[ 0.376096] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.376096] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.383547] PCI: Using configuration type 1 for base access
[ 0.384215] bio: create slab <bio-0> at 0
[ 0.389078] ACPI: EC: Look up EC in DSDT
[ 0.393460] ACPI Warning: Incorrect checksum in table [TAMG] - 0xB8, should be 0xB7 (20110112/tbutils-314)
[ 0.393667] ACPI: SSDT 00000000dfeede40 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.393918] ACPI: Dynamic OEM Table Load:
[ 0.393921] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.394097] ACPI: SSDT 00000000dfeee300 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.394338] ACPI: Dynamic OEM Table Load:
[ 0.394341] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.394528] ACPI: SSDT 00000000dfeee460 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
[ 0.394769] ACPI: Dynamic OEM Table Load:
[ 0.394772] ACPI: SSDT (null) 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
[ 0.394956] ACPI: SSDT 00000000dfeee5c0 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 0.395198] ACPI: Dynamic OEM Table Load:
[ 0.395201] ACPI: SSDT (null) 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 0.395388] ACPI: Interpreter enabled
[ 0.395391] ACPI: (supports S0 S3 S4 S5)
[ 0.395412] ACPI: Using IOAPIC for interrupt routing
[ 0.404189] ACPI: No dock devices found.
[ 0.404192] HEST: Table not found.
[ 0.404195] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.404255] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.404291] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.404291] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.404291] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.404291] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.404291] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff]
[ 0.404291] pci_bus 0000:00: scanning bus
[ 0.404291] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
[ 0.404291] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.404291] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x166
[ 0.404291] pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404291] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
[ 0.404291] pci 0000:00:01.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.404291] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x166
[ 0.404291] pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404291] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.404291] pci 0000:00:01.0: PME# disabled
[ 0.404291] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.404291] pci 0000:00:1a.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.404306] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
[ 0.404324] pci 0000:00:1a.0: calling quirk_resource_alignment+0x0/0x166
[ 0.404327] pci 0000:00:1a.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404354] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.404360] pci 0000:00:1a.1: calling quirk_mmio_always_on+0x0/0x17
[ 0.404397] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
[ 0.404415] pci 0000:00:1a.1: calling quirk_resource_alignment+0x0/0x166
[ 0.404418] pci 0000:00:1a.1: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404444] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.404451] pci 0000:00:1a.2: calling quirk_mmio_always_on+0x0/0x17
[ 0.404487] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f]
[ 0.404505] pci 0000:00:1a.2: calling quirk_resource_alignment+0x0/0x166
[ 0.404508] pci 0000:00:1a.2: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404539] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.404546] pci 0000:00:1a.7: calling quirk_mmio_always_on+0x0/0x17
[ 0.404558] pci 0000:00:1a.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.404607] pci 0000:00:1a.7: calling quirk_resource_alignment+0x0/0x166
[ 0.404610] pci 0000:00:1a.7: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404641] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.404645] pci 0000:00:1b.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.404659] pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
[ 0.404693] pci 0000:00:1b.0: calling quirk_resource_alignment+0x0/0x166
[ 0.404696] pci 0000:00:1b.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404715] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.404718] pci 0000:00:1b.0: PME# disabled
[ 0.404737] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.404741] pci 0000:00:1c.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.404772] pci 0000:00:1c.0: calling quirk_resource_alignment+0x0/0x166
[ 0.404775] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404796] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.404800] pci 0000:00:1c.0: PME# disabled
[ 0.404822] pci 0000:00:1c.3: [8086:3a46] type 1 class 0x000604
[ 0.404826] pci 0000:00:1c.3: calling quirk_mmio_always_on+0x0/0x17
[ 0.404857] pci 0000:00:1c.3: calling quirk_resource_alignment+0x0/0x166
[ 0.404860] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404881] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.404885] pci 0000:00:1c.3: PME# disabled
[ 0.404905] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[ 0.404909] pci 0000:00:1c.4: calling quirk_mmio_always_on+0x0/0x17
[ 0.404940] pci 0000:00:1c.4: calling quirk_resource_alignment+0x0/0x166
[ 0.404943] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404964] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.404967] pci 0000:00:1c.4: PME# disabled
[ 0.404991] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.404998] pci 0000:00:1d.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.405034] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f]
[ 0.405052] pci 0000:00:1d.0: calling quirk_resource_alignment+0x0/0x166
[ 0.405055] pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.405082] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.405089] pci 0000:00:1d.1: calling quirk_mmio_always_on+0x0/0x17
[ 0.405124] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f]
[ 0.405143] pci 0000:00:1d.1: calling quirk_resource_alignment+0x0/0x166
[ 0.405146] pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.405172] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.405179] pci 0000:00:1d.2: calling quirk_mmio_always_on+0x0/0x17
[ 0.405215] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f]
[ 0.405233] pci 0000:00:1d.2: calling quirk_resource_alignment+0x0/0x166
[ 0.405236] pci 0000:00:1d.2: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.405267] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.405274] pci 0000:00:1d.7: calling quirk_mmio_always_on+0x0/0x17
[ 0.405286] pci 0000:00:1d.7: reg 10: [mem 0xfdffe000-0xfdffe3ff]
[ 0.405335] pci 0000:00:1d.7: calling quirk_resource_alignment+0x0/0x166
[ 0.405338] pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.405365] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.405372] pci 0000:00:1e.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.405397] pci 0000:00:1e.0: calling quirk_resource_alignment+0x0/0x166
[ 0.405400] pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.405427] pci 0000:00:1f.0: [8086:3a18] type 0 class 0x000601
[ 0.405435] pci 0000:00:1f.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.405501] pci 0000:00:1f.0: calling quirk_resource_alignment+0x0/0x166
[ 0.405504] pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.405537] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
[ 0.405544] pci 0000:00:1f.2: calling quirk_mmio_always_on+0x0/0x17
[ 0.405554] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.405562] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.405569] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.405577] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.405584] pci 0000:00:1f.2: reg 20: [io 0xf900-0xf90f]
[ 0.405592] pci 0000:00:1f.2: reg 24: [io 0xf800-0xf80f]
[ 0.405604] pci 0000:00:1f.2: calling quirk_resource_alignment+0x0/0x166
[ 0.405607] pci 0000:00:1f.2: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.405633] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.405637] pci 0000:00:1f.3: calling quirk_mmio_always_on+0x0/0x17
[ 0.405650] pci 0000:00:1f.3: reg 10: [mem 0xfdffd000-0xfdffd0ff 64bit]
[ 0.405670] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.405687] pci 0000:00:1f.3: calling quirk_resource_alignment+0x0/0x166
[ 0.405690] pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.405708] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
[ 0.405716] pci 0000:00:1f.5: calling quirk_mmio_always_on+0x0/0x17
[ 0.405725] pci 0000:00:1f.5: reg 10: [io 0xf600-0xf607]
[ 0.405733] pci 0000:00:1f.5: reg 14: [io 0xf500-0xf503]
[ 0.405741] pci 0000:00:1f.5: reg 18: [io 0xf400-0xf407]
[ 0.405748] pci 0000:00:1f.5: reg 1c: [io 0xf300-0xf303]
[ 0.405756] pci 0000:00:1f.5: reg 20: [io 0xf200-0xf20f]
[ 0.405763] pci 0000:00:1f.5: reg 24: [io 0xf100-0xf10f]
[ 0.405775] pci 0000:00:1f.5: calling quirk_resource_alignment+0x0/0x166
[ 0.405778] pci 0000:00:1f.5: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.405800] pci_bus 0000:00: fixups for bus
[ 0.405803] pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 0
[ 0.405824] pci_bus 0000:01: scanning bus
[ 0.405838] pci 0000:01:00.0: [10de:0641] type 0 class 0x000300
[ 0.405841] pci 0000:01:00.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.405851] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.405861] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.405872] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.405880] pci 0000:01:00.0: reg 24: [io 0xbf00-0xbf7f]
[ 0.405887] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.405893] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x166
[ 0.405933] pci_bus 0000:01: fixups for bus
[ 0.405935] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.405938] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.405941] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.405945] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.405948] pci_bus 0000:01: bus scan returning with max=01
[ 0.405952] pci 0000:00:1c.0: scanning [bus 02-02] behind bridge, pass 0
[ 0.405984] pci_bus 0000:02: scanning bus
[ 0.405987] pci_bus 0000:02: fixups for bus
[ 0.405989] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.405993] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.405997] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.406003] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.406005] pci_bus 0000:02: bus scan returning with max=02
[ 0.406010] pci 0000:00:1c.3: scanning [bus 03-03] behind bridge, pass 0
[ 0.406042] pci_bus 0000:03: scanning bus
[ 0.406062] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
[ 0.406067] pci 0000:03:00.0: calling quirk_jmicron_ata+0x0/0x100
[ 0.406081] pci 0000:03:00.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.406154] pci 0000:03:00.0: reg 24: [mem 0xfddfe000-0xfddfffff]
[ 0.406173] pci 0000:03:00.0: calling quirk_resource_alignment+0x0/0x166
[ 0.406200] pci 0000:03:00.0: PME# supported from D3hot
[ 0.406205] pci 0000:03:00.0: PME# disabled
[ 0.406234] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.406243] pci 0000:03:00.1: calling quirk_jmicron_ata+0x0/0x100
[ 0.406246] pci 0000:03:00.1: calling quirk_mmio_always_on+0x0/0x17
[ 0.406263] pci 0000:03:00.1: reg 10: [io 0xef00-0xef07]
[ 0.406277] pci 0000:03:00.1: reg 14: [io 0xee00-0xee03]
[ 0.406290] pci 0000:03:00.1: reg 18: [io 0xed00-0xed07]
[ 0.406304] pci 0000:03:00.1: reg 1c: [io 0xec00-0xec03]
[ 0.406317] pci 0000:03:00.1: reg 20: [io 0xeb00-0xeb0f]
[ 0.406348] pci 0000:03:00.1: calling quirk_resource_alignment+0x0/0x166
[ 0.406388] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.406401] pci_bus 0000:03: fixups for bus
[ 0.406403] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.406407] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.406411] pci 0000:00:1c.3: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.406417] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.406419] pci_bus 0000:03: bus scan returning with max=03
[ 0.406423] pci 0000:00:1c.4: scanning [bus 04-04] behind bridge, pass 0
[ 0.406457] pci_bus 0000:04: scanning bus
[ 0.406477] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.406482] pci 0000:04:00.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.406496] pci 0000:04:00.0: reg 10: [io 0xde00-0xdeff]
[ 0.406524] pci 0000:04:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref]
[ 0.406542] pci 0000:04:00.0: reg 20: [mem 0xfdee0000-0xfdeeffff 64bit pref]
[ 0.406554] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.406561] pci 0000:04:00.0: calling quirk_resource_alignment+0x0/0x166
[ 0.406595] pci 0000:04:00.0: supports D1 D2
[ 0.406597] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.406601] pci 0000:04:00.0: PME# disabled
[ 0.412041] pci_bus 0000:04: fixups for bus
[ 0.412044] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.412048] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.412053] pci 0000:00:1c.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.412059] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.412062] pci_bus 0000:04: bus scan returning with max=04
[ 0.412067] pci 0000:00:1e.0: scanning [bus 05-05] behind bridge, pass 0
[ 0.412086] pci_bus 0000:05: scanning bus
[ 0.412103] pci 0000:05:00.0: [10ec:8169] type 0 class 0x000200
[ 0.412112] pci 0000:05:00.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.412136] pci 0000:05:00.0: reg 10: [io 0xce00-0xceff]
[ 0.412151] pci 0000:05:00.0: reg 14: [mem 0xfdcff000-0xfdcff0ff]
[ 0.412201] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.412207] pci 0000:05:00.0: calling quirk_resource_alignment+0x0/0x166
[ 0.412222] pci 0000:05:00.0: supports D1 D2
[ 0.412224] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.412229] pci 0000:05:00.0: PME# disabled
[ 0.412253] pci 0000:05:07.0: [104c:8024] type 0 class 0x000c00
[ 0.412261] pci 0000:05:07.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.412273] pci 0000:05:07.0: reg 10: [mem 0xfdcfe000-0xfdcfe7ff]
[ 0.412283] pci 0000:05:07.0: reg 14: [mem 0xfdcf8000-0xfdcfbfff]
[ 0.412328] pci 0000:05:07.0: calling quirk_resource_alignment+0x0/0x166
[ 0.412343] pci 0000:05:07.0: supports D1 D2
[ 0.412345] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.412350] pci 0000:05:07.0: PME# disabled
[ 0.412384] pci_bus 0000:05: fixups for bus
[ 0.412386] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.412390] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.412394] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.412399] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.412402] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.412405] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.412408] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.412410] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.412413] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
[ 0.412415] pci_bus 0000:05: bus scan returning with max=05
[ 0.412419] pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 1
[ 0.412424] pci 0000:00:1c.0: scanning [bus 02-02] behind bridge, pass 1
[ 0.412430] pci 0000:00:1c.3: scanning [bus 03-03] behind bridge, pass 1
[ 0.412435] pci 0000:00:1c.4: scanning [bus 04-04] behind bridge, pass 1
[ 0.412441] pci 0000:00:1e.0: scanning [bus 05-05] behind bridge, pass 1
[ 0.412446] pci_bus 0000:00: bus scan returning with max=05
[ 0.412449] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.412611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.412659] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.412713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.412757] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.412911] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.424685] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.424685] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.424685] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.424685] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.424685] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.424685] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.424685] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.424685] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.424685] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.424685] vgaarb: loaded
[ 0.428033] usbcore: registered new interface driver usbfs
[ 0.428059] usbcore: registered new interface driver hub
[ 0.428073] usbcore: registered new device driver usb
[ 0.428073] PCI: Using ACPI for IRQ routing
[ 0.428073] PCI: pci_cache_line_size set to 64 bytes
[ 0.428073] pci 0000:00:1a.0: BAR 4: reserving [io 0xff00-0xff1f flags 0x40101] (d=0, p=0)
[ 0.428073] pci 0000:00:1a.1: BAR 4: reserving [io 0xfe00-0xfe1f flags 0x40101] (d=0, p=0)
[ 0.428073] pci 0000:00:1a.2: BAR 4: reserving [io 0xfd00-0xfd1f flags 0x40101] (d=0, p=0)
[ 0.428073] pci 0000:00:1a.7: BAR 0: reserving [mem 0xfdfff000-0xfdfff3ff flags 0x40200] (d=0, p=0)
[ 0.428073] pci 0000:00:1b.0: BAR 0: reserving [mem 0xfdff8000-0xfdffbfff flags 0x140204] (d=0, p=0)
[ 0.428081] pci 0000:00:1d.0: BAR 4: reserving [io 0xfc00-0xfc1f flags 0x40101] (d=0, p=0)
[ 0.428087] pci 0000:00:1d.1: BAR 4: reserving [io 0xfb00-0xfb1f flags 0x40101] (d=0, p=0)
[ 0.428092] pci 0000:00:1d.2: BAR 4: reserving [io 0xfa00-0xfa1f flags 0x40101] (d=0, p=0)
[ 0.428098] pci 0000:00:1d.7: BAR 0: reserving [mem 0xfdffe000-0xfdffe3ff flags 0x40200] (d=0, p=0)
[ 0.428107] pci 0000:00:1f.2: BAR 0: reserving [io 0x01f0-0x01f7 flags 0x110] (d=0, p=0)
[ 0.428111] pci 0000:00:1f.2: BAR 1: reserving [io 0x03f6 flags 0x110] (d=0, p=0)
[ 0.428115] pci 0000:00:1f.2: BAR 2: reserving [io 0x0170-0x0177 flags 0x110] (d=0, p=0)
[ 0.428119] pci 0000:00:1f.2: BAR 3: reserving [io 0x0376 flags 0x110] (d=0, p=0)
[ 0.428122] pci 0000:00:1f.2: BAR 4: reserving [io 0xf900-0xf90f flags 0x40101] (d=0, p=0)
[ 0.428126] pci 0000:00:1f.2: BAR 5: reserving [io 0xf800-0xf80f flags 0x40101] (d=0, p=0)
[ 0.428131] pci 0000:00:1f.3: BAR 0: reserving [mem 0xfdffd000-0xfdffd0ff flags 0x140204] (d=0, p=0)
[ 0.428135] pci 0000:00:1f.3: BAR 4: reserving [io 0x0500-0x051f flags 0x40101] (d=0, p=0)
[ 0.428141] pci 0000:00:1f.5: BAR 0: reserving [io 0xf600-0xf607 flags 0x40101] (d=0, p=0)
[ 0.428145] pci 0000:00:1f.5: BAR 1: reserving [io 0xf500-0xf503 flags 0x40101] (d=0, p=0)
[ 0.428148] pci 0000:00:1f.5: BAR 2: reserving [io 0xf400-0xf407 flags 0x40101] (d=0, p=0)
[ 0.428152] pci 0000:00:1f.5: BAR 3: reserving [io 0xf300-0xf303 flags 0x40101] (d=0, p=0)
[ 0.428156] pci 0000:00:1f.5: BAR 4: reserving [io 0xf200-0xf20f flags 0x40101] (d=0, p=0)
[ 0.428159] pci 0000:00:1f.5: BAR 5: reserving [io 0xf100-0xf10f flags 0x40101] (d=0, p=0)
[ 0.428165] pci 0000:01:00.0: BAR 0: reserving [mem 0xfa000000-0xfaffffff flags 0x40200] (d=0, p=0)
[ 0.428169] pci 0000:01:00.0: BAR 1: reserving [mem 0xe0000000-0xefffffff flags 0x14220c] (d=0, p=0)
[ 0.428173] pci 0000:01:00.0: BAR 3: reserving [mem 0xf8000000-0xf9ffffff flags 0x140204] (d=0, p=0)
[ 0.428177] pci 0000:01:00.0: BAR 5: reserving [io 0xbf00-0xbf7f flags 0x40101] (d=0, p=0)
[ 0.428183] pci 0000:03:00.0: BAR 5: reserving [mem 0xfddfe000-0xfddfffff flags 0x40200] (d=0, p=0)
[ 0.428192] pci 0000:04:00.0: BAR 0: reserving [io 0xde00-0xdeff flags 0x40101] (d=0, p=0)
[ 0.428196] pci 0000:04:00.0: BAR 2: reserving [mem 0xfdeff000-0xfdefffff flags 0x14220c] (d=0, p=0)
[ 0.428199] pci 0000:04:00.0: BAR 4: reserving [mem 0xfdee0000-0xfdeeffff flags 0x14220c] (d=0, p=0)
[ 0.428205] pci 0000:05:00.0: BAR 0: reserving [io 0xce00-0xceff flags 0x40101] (d=0, p=0)
[ 0.428209] pci 0000:05:00.0: BAR 1: reserving [mem 0xfdcff000-0xfdcff0ff flags 0x40200] (d=0, p=0)
[ 0.428215] pci 0000:05:07.0: BAR 0: reserving [mem 0xfdcfe000-0xfdcfe7ff flags 0x40200] (d=0, p=0)
[ 0.428219] pci 0000:05:07.0: BAR 1: reserving [mem 0xfdcf8000-0xfdcfbfff flags 0x40200] (d=0, p=0)
[ 0.428260] pci 0000:03:00.1: BAR 0: reserving [io 0xef00-0xef07 flags 0x40101] (d=1, p=1)
[ 0.428264] pci 0000:03:00.1: BAR 1: reserving [io 0xee00-0xee03 flags 0x40101] (d=1, p=1)
[ 0.428268] pci 0000:03:00.1: BAR 2: reserving [io 0xed00-0xed07 flags 0x40101] (d=1, p=1)
[ 0.428271] pci 0000:03:00.1: BAR 3: reserving [io 0xec00-0xec03 flags 0x40101] (d=1, p=1)
[ 0.428275] pci 0000:03:00.1: BAR 4: reserving [io 0xeb00-0xeb0f flags 0x40101] (d=1, p=1)
[ 0.428286] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.428289] reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff
[ 0.428308] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.428308] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.428308] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.448059] Switching to clocksource hpet
[ 0.448075] Switched to NOHz mode on CPU #1
[ 0.451925] Switched to NOHz mode on CPU #0
[ 0.451982] Switched to NOHz mode on CPU #3
[ 0.451995] Switched to NOHz mode on CPU #2
[ 0.455757] pnp: PnP ACPI init
[ 0.455779] ACPI: bus type pnp registered
[ 0.455885] pnp 00:00: [bus 00-3f]
[ 0.455888] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.455890] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.455893] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.455895] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.455897] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.455900] pnp 00:00: [mem 0xdff00000-0xfebfffff window]
[ 0.456033] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.456136] pnp 00:01: [io 0x0010-0x001f]
[ 0.456139] pnp 00:01: [io 0x0022-0x003f]
[ 0.456141] pnp 00:01: [io 0x0044-0x005f]
[ 0.456142] pnp 00:01: [io 0x0062-0x0063]
[ 0.456144] pnp 00:01: [io 0x0065-0x006f]
[ 0.456148] pnp 00:01: [io 0x0074-0x007f]
[ 0.456150] pnp 00:01: [io 0x0091-0x0093]
[ 0.456152] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.456154] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.456156] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.456158] pnp 00:01: [io 0x0290-0x029f]
[ 0.456159] pnp 00:01: [io 0x0800-0x087f]
[ 0.456161] pnp 00:01: [io 0x0290-0x0294]
[ 0.456163] pnp 00:01: [io 0x0880-0x088f]
[ 0.456305] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.456308] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.456311] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.456313] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.456316] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.456320] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.456334] pnp 00:02: [dma 4]
[ 0.456336] pnp 00:02: [io 0x0000-0x000f]
[ 0.456338] pnp 00:02: [io 0x0080-0x0090]
[ 0.456340] pnp 00:02: [io 0x0094-0x009f]
[ 0.456342] pnp 00:02: [io 0x00c0-0x00df]
[ 0.456426] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.456485] pnp 00:03: [irq 0 disabled]
[ 0.456496] pnp 00:03: [irq 8]
[ 0.456498] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.456582] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.456615] pnp 00:04: [io 0x0070-0x0073]
[ 0.456699] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.456711] pnp 00:05: [io 0x0061]
[ 0.456795] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.456807] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.456812] pnp 00:06: [irq 13]
[ 0.456897] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.457026] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.457028] pnp 00:07: [io 0x03f7]
[ 0.457033] pnp 00:07: [irq 6]
[ 0.457035] pnp 00:07: [dma 2]
[ 0.457132] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.457305] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.457312] pnp 00:08: [irq 4]
[ 0.457422] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.457616] pnp 00:09: [io 0x0378-0x037f]
[ 0.457622] pnp 00:09: [irq 7]
[ 0.457727] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.457835] pnp 00:0a: [irq 12]
[ 0.457921] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.457949] pnp 00:0b: [io 0x0060]
[ 0.457952] pnp 00:0b: [io 0x0064]
[ 0.457956] pnp 00:0b: [irq 1]
[ 0.458048] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.458091] pnp 00:0c: [io 0x0400-0x04cf]
[ 0.458094] pnp 00:0c: [io 0x04d2-0x04ff]
[ 0.458210] system 00:0c: [io 0x0400-0x04cf] has been reserved
[ 0.458213] system 00:0c: [io 0x04d2-0x04ff] has been reserved
[ 0.458217] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.458441] pnp 00:0d: [mem 0xf4000000-0xf7ffffff]
[ 0.458569] system 00:0d: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.458573] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.458754] pnp 00:0e: [mem 0x000ce000-0x000cffff]
[ 0.458757] pnp 00:0e: [mem 0x000f0000-0x000f7fff]
[ 0.458759] pnp 00:0e: [mem 0x000f8000-0x000fbfff]
[ 0.458761] pnp 00:0e: [mem 0x000fc000-0x000fffff]
[ 0.458763] pnp 00:0e: [mem 0xdfee0000-0xdfeeffff]
[ 0.458767] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.458769] pnp 00:0e: [mem 0x00100000-0xdfedffff]
[ 0.458771] pnp 00:0e: [mem 0xdfef0000-0xdfefffff]
[ 0.458773] pnp 00:0e: [mem 0xfec00000-0xfec00fff]
[ 0.458775] pnp 00:0e: [mem 0xfed10000-0xfed1dfff]
[ 0.458777] pnp 00:0e: [mem 0xfed20000-0xfed8ffff]
[ 0.458779] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
[ 0.458782] pnp 00:0e: [mem 0xffb00000-0xffb7ffff]
[ 0.458784] pnp 00:0e: [mem 0xfff00000-0xffffffff]
[ 0.458786] pnp 00:0e: [mem 0x000e0000-0x000effff]
[ 0.458928] system 00:0e: [mem 0x000ce000-0x000cffff] has been reserved
[ 0.458931] system 00:0e: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.458934] system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.458937] system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.458940] system 00:0e: [mem 0xdfee0000-0xdfeeffff] could not be reserved
[ 0.458943] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.458946] system 00:0e: [mem 0x00100000-0xdfedffff] could not be reserved
[ 0.458949] system 00:0e: [mem 0xdfef0000-0xdfefffff] has been reserved
[ 0.458952] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.458955] system 00:0e: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.458958] system 00:0e: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.458961] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.458964] system 00:0e: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.458967] system 00:0e: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.458970] system 00:0e: [mem 0x000e0000-0x000effff] has been reserved
[ 0.458974] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.458996] pnp 00:0f: [mem 0xffb80000-0xffbfffff]
[ 0.459096] pnp 00:0f: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.459102] pnp: PnP ACPI: found 16 devices
[ 0.459104] ACPI: ACPI bus type pnp unregistered
[ 0.469750] pci 0000:00:1e.0: BAR 15: assigned [mem 0xdff00000-0xdff0ffff pref]
[ 0.469754] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.469758] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
[ 0.469761] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.469764] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.469768] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.469771] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.469775] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.469778] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.469783] pci 0000:00:1c.0: bridge window [mem disabled]
[ 0.469786] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 0.469792] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.469795] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.469799] pci 0000:00:1c.3: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.469803] pci 0000:00:1c.3: bridge window [mem pref disabled]
[ 0.469810] pci 0000:04:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref]
[ 0.469812] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.469815] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.469820] pci 0000:00:1c.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.469824] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.469830] pci 0000:05:00.0: BAR 6: assigned [mem 0xdff00000-0xdff0ffff pref]
[ 0.469833] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.469836] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.469840] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.469844] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xdff0ffff pref]
[ 0.469862] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.469866] pci 0000:00:01.0: setting latency timer to 64
[ 0.469872] pci 0000:00:1c.0: enabling device (0000 -> 0001)
[ 0.469876] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.469879] pci 0000:00:1c.0: enabling bus mastering
[ 0.469882] pci 0000:00:1c.0: setting latency timer to 64
[ 0.469895] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.469899] pci 0000:00:1c.3: setting latency timer to 64
[ 0.469905] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.469909] pci 0000:00:1c.4: setting latency timer to 64
[ 0.469915] pci 0000:00:1e.0: setting latency timer to 64
[ 0.469919] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.469921] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.469924] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.469926] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.469928] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff]
[ 0.469931] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.469933] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.469935] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.469938] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.469940] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.469942] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.469945] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.469947] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.469950] pci_bus 0000:04: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.469952] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 0.469954] pci_bus 0000:05: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.469957] pci_bus 0000:05: resource 2 [mem 0xdff00000-0xdff0ffff pref]
[ 0.469959] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.469961] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.469963] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.469965] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.469968] pci_bus 0000:05: resource 8 [mem 0xdff00000-0xfebfffff]
[ 0.470097] NET: Registered protocol family 2
[ 0.470283] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.471451] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.474238] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.474574] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.474577] TCP reno registered
[ 0.474587] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.474620] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.474829] NET: Registered protocol family 1
[ 0.474846] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x144
[ 0.474851] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.474854] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.474858] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xad
[ 0.474863] pci 0000:00:01.0: calling quirk_e100_interrupt+0x0/0x144
[ 0.474866] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.474869] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.474872] pci 0000:00:01.0: calling pci_fixup_video+0x0/0xad
[ 0.474876] pci 0000:00:1a.0: calling quirk_e100_interrupt+0x0/0x144
[ 0.474879] pci 0000:00:1a.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.474882] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.474887] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f10
[ 0.474889] pci 0000:00:1a.0: Performing full reset
[ 0.474900] pci 0000:00:1a.0: calling pci_fixup_video+0x0/0xad
[ 0.474905] pci 0000:00:1a.1: calling quirk_e100_interrupt+0x0/0x144
[ 0.474908] pci 0000:00:1a.1: calling quirk_cardbus_legacy+0x0/0x22
[ 0.474911] pci 0000:00:1a.1: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.474915] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.474917] pci 0000:00:1a.1: Performing full reset
[ 0.474929] pci 0000:00:1a.1: calling pci_fixup_video+0x0/0xad
[ 0.474934] pci 0000:00:1a.2: calling quirk_e100_interrupt+0x0/0x144
[ 0.474937] pci 0000:00:1a.2: calling quirk_cardbus_legacy+0x0/0x22
[ 0.474939] pci 0000:00:1a.2: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.474944] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.474945] pci 0000:00:1a.2: Performing full reset
[ 0.474957] pci 0000:00:1a.2: calling pci_fixup_video+0x0/0xad
[ 0.474962] pci 0000:00:1a.7: calling quirk_e100_interrupt+0x0/0x144
[ 0.474965] pci 0000:00:1a.7: calling quirk_cardbus_legacy+0x0/0x22
[ 0.474968] pci 0000:00:1a.7: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.474988] pci 0000:00:1a.7: EHCI: BIOS handoff
[ 0.488022] pci 0000:00:1a.7: calling pci_fixup_video+0x0/0xad
[ 0.488029] pci 0000:00:1b.0: calling quirk_e100_interrupt+0x0/0x144
[ 0.488032] pci 0000:00:1b.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.488036] pci 0000:00:1b.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.488039] pci 0000:00:1b.0: calling pci_fixup_video+0x0/0xad
[ 0.488044] pci 0000:00:1c.0: calling quirk_e100_interrupt+0x0/0x144
[ 0.488047] pci 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.488051] pci 0000:00:1c.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.488054] pci 0000:00:1c.0: calling pci_fixup_video+0x0/0xad
[ 0.488059] pci 0000:00:1c.3: calling quirk_e100_interrupt+0x0/0x144
[ 0.488063] pci 0000:00:1c.3: calling quirk_cardbus_legacy+0x0/0x22
[ 0.488066] pci 0000:00:1c.3: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.488069] pci 0000:00:1c.3: calling pci_fixup_video+0x0/0xad
[ 0.488074] pci 0000:00:1c.4: calling quirk_e100_interrupt+0x0/0x144
[ 0.488078] pci 0000:00:1c.4: calling quirk_cardbus_legacy+0x0/0x22
[ 0.488081] pci 0000:00:1c.4: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.488084] pci 0000:00:1c.4: calling pci_fixup_video+0x0/0xad
[ 0.488089] pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x144
[ 0.488093] pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.488096] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.488111] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30
[ 0.488113] pci 0000:00:1d.0: Performing full reset
[ 0.488130] pci 0000:00:1d.0: calling pci_fixup_video+0x0/0xad
[ 0.488135] pci 0000:00:1d.1: calling quirk_e100_interrupt+0x0/0x144
[ 0.488138] pci 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x22
[ 0.488140] pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.488145] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.488146] pci 0000:00:1d.1: Performing full reset
[ 0.488158] pci 0000:00:1d.1: calling pci_fixup_video+0x0/0xad
[ 0.488163] pci 0000:00:1d.2: calling quirk_e100_interrupt+0x0/0x144
[ 0.488166] pci 0000:00:1d.2: calling quirk_cardbus_legacy+0x0/0x22
[ 0.488169] pci 0000:00:1d.2: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.488173] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.488175] pci 0000:00:1d.2: Performing full reset
[ 0.488186] pci 0000:00:1d.2: calling pci_fixup_video+0x0/0xad
[ 0.488191] pci 0000:00:1d.7: calling quirk_e100_interrupt+0x0/0x144
[ 0.488194] pci 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x22
[ 0.488197] pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.488223] pci 0000:00:1d.7: EHCI: BIOS handoff
[ 0.504017] pci 0000:00:1d.7: calling pci_fixup_video+0x0/0xad
[ 0.504023] pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x144
[ 0.504026] pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.504030] pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.504033] pci 0000:00:1e.0: calling pci_fixup_video+0x0/0xad
[ 0.504038] pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x144
[ 0.504042] pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.504045] pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.504048] pci 0000:00:1f.0: calling pci_fixup_video+0x0/0xad
[ 0.504054] pci 0000:00:1f.2: calling quirk_e100_interrupt+0x0/0x144
[ 0.504057] pci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x22
[ 0.504061] pci 0000:00:1f.2: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.504064] pci 0000:00:1f.2: calling pci_fixup_video+0x0/0xad
[ 0.504069] pci 0000:00:1f.3: calling quirk_e100_interrupt+0x0/0x144
[ 0.504072] pci 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x22
[ 0.504076] pci 0000:00:1f.3: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.504079] pci 0000:00:1f.3: calling pci_fixup_video+0x0/0xad
[ 0.504084] pci 0000:00:1f.5: calling quirk_e100_interrupt+0x0/0x144
[ 0.504088] pci 0000:00:1f.5: calling quirk_cardbus_legacy+0x0/0x22
[ 0.504091] pci 0000:00:1f.5: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.504094] pci 0000:00:1f.5: calling pci_fixup_video+0x0/0xad
[ 0.504104] pci 0000:01:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd
[ 0.504125] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.504127] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.504130] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xad
[ 0.504133] pci 0000:01:00.0: Boot video device
[ 0.504138] pci 0000:03:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.504141] pci 0000:03:00.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.504144] pci 0000:03:00.0: calling pci_fixup_video+0x0/0xad
[ 0.504149] pci 0000:03:00.1: calling quirk_cardbus_legacy+0x0/0x22
[ 0.504152] pci 0000:03:00.1: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.504155] pci 0000:03:00.1: calling pci_fixup_video+0x0/0xad
[ 0.504160] pci 0000:04:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.504163] pci 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.504166] pci 0000:04:00.0: calling pci_fixup_video+0x0/0xad
[ 0.504171] pci 0000:05:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.504174] pci 0000:05:00.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.504176] pci 0000:05:00.0: calling pci_fixup_video+0x0/0xad
[ 0.504182] pci 0000:05:07.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.504184] pci 0000:05:07.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.504187] pci 0000:05:07.0: calling pci_fixup_video+0x0/0xad
[ 0.504191] PCI: CLS 4 bytes, default 64
[ 0.504248] Trying to unpack rootfs image as initramfs...
[ 0.746378] Freeing initrd memory: 10888k freed
[ 0.757653] DMA-API: preallocated 32768 debug entries
[ 0.757655] DMA-API: debugging enabled by kernel config
[ 0.757659] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.757663] Placing 64MB software IO TLB between ffff8800dbeda000 - ffff8800dfeda000
[ 0.757665] software IO TLB at phys 0xdbeda000 - 0xdfeda000
[ 0.760157] audit: initializing netlink socket (disabled)
[ 0.760177] type=2000 audit(1300544502.756:1): initialized
[ 0.760907] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.761317] VFS: Disk quotas dquot_6.5.2
[ 0.761369] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.761461] msgmni has been set to 7925
[ 0.761972] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.761976] io scheduler noop registered
[ 0.761978] io scheduler deadline registered
[ 0.762017] io scheduler cfq registered (default)
[ 0.762328] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.762357] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.762458] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.762491] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.762600] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.762634] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.762747] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.762781] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.763784] efifb: probing for efifb
[ 0.764211] efifb: framebuffer at 0xf9000000, mapped to 0xffffc90005100000, using 3072k, total 3072k
[ 0.764214] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.764215] efifb: scrolling: redraw
[ 0.764218] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.785953] Console: switching to colour frame buffer device 128x48
[ 0.805934] fb0: EFI VGA frame buffer device
[ 0.805937] intel_idle: MWAIT substates: 0x20
[ 0.805939] intel_idle: does not run on family 6 model 23
[ 0.806065] ERST: Table is not found!
[ 0.851838] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.872245] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.148663] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.212620] Linux agpgart interface v0.103
[ 1.215740] brd: module loaded
[ 1.216105] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.216539] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.216595] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.216941] mousedev: PS/2 mouse device common for all mice
[ 1.217042] rtc_cmos 00:04: RTC can wake from S4
[ 1.234945] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.248072] rtc (null): alarm rollover: day
[ 1.248184] rtc_cmos: dev (254:0)
[ 1.248197] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.248221] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.248286] cpuidle: using governor ladder
[ 1.248292] cpuidle: using governor menu
[ 1.248588] TCP cubic registered
[ 1.248591] NET: Registered protocol family 17
[ 1.248596] Registering the dns_resolver key type
[ 1.248900] registered taskstats version 1
[ 1.248903] IMA: No TPM chip found, activating TPM-bypass!
[ 1.249335] rtc_cmos 00:04: setting system clock to 2011-03-19 14:21:44 UTC (1300544504)
[ 1.250844] Freeing unused kernel memory: 584k freed
[ 1.250963] Write protecting the kernel read-only data: 6144k
[ 1.254508] Freeing unused kernel memory: 856k freed
[ 1.255856] Freeing unused kernel memory: 284k freed
[ 1.273175] udev[1059]: starting version 164
[ 1.355581] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.355586] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 1.355640] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.355674] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.355678] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.355697] drivers/usb/core/inode.c: creating file 'devices'
[ 1.355702] drivers/usb/core/inode.c: creating file '001'
[ 1.355823] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.364812] Floppy drive(s): fd0 is 1.44M
[ 1.365744] Uniform Multi-Platform E-IDE driver
[ 1.380162] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 1.380167] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
[ 1.380222] ehci_hcd 0000:00:1a.7: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
[ 1.383832] FDC 0 is a post-1991 82077
[ 1.384121] ehci_hcd 0000:00:1a.7: Enabling legacy PCI PM
[ 1.384143] ehci_hcd 0000:00:1a.7: cache line size of 4 is not supported
[ 1.384145] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 1.384168] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
[ 1.384173] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.386524] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.388058] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.393634] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.393658] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.393665] r8169 0000:04:00.0: enabling Mem-Wr-Inval
[ 1.393709] r8169 0000:04:00.0: setting latency timer to 64
[ 1.393769] r8169 0000:04:00.0: irq 44 for MSI/MSI-X
[ 1.394034] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xffffc900050fa000, 00:1f:d0:9a:d6:63, XID 1c4000c0 IRQ 44
[ 1.397322] jmicron 0000:03:00.1: IDE controller (0x197b:0x2363 rev 0x02)
[ 1.397337] JMicron IDE 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.397345] JMicron IDE 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.397369] jmicron 0000:03:00.1: 100% native mode on irq 16
[ 1.397378] JMicron IDE 0000:03:00.1: enabling bus mastering
[ 1.397387] JMicron IDE 0000:03:00.1: setting latency timer to 64
[ 1.397392] ide0: BM-DMA at 0xeb00-0xeb07
[ 1.397416] ide1: BM-DMA at 0xeb08-0xeb0f
[ 1.397435] Probing IDE interface ide0...
[ 1.400105] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.400145] usb usb1: default language 0x0409
[ 1.400156] usb usb1: udev 1, busnum 1, minor = 0
[ 1.400161] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.400167] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.400175] usb usb1: Product: EHCI Host Controller
[ 1.400181] usb usb1: Manufacturer: Linux 2.6.38-git8 ehci_hcd
[ 1.400187] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.400328] usb usb1: usb_probe_device
[ 1.400335] usb usb1: configuration #1 chosen from 1 choice
[ 1.400347] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.400374] hub 1-0:1.0: usb_probe_interface
[ 1.400380] hub 1-0:1.0: usb_probe_interface - got id
[ 1.400386] hub 1-0:1.0: USB hub found
[ 1.400395] hub 1-0:1.0: 6 ports detected
[ 1.400401] hub 1-0:1.0: standalone hub
[ 1.400406] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.400412] hub 1-0:1.0: individual port over-current protection
[ 1.400417] hub 1-0:1.0: power on to power good time: 20ms
[ 1.400422] hub 1-0:1.0: local power source is good
[ 1.400428] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1.400496] drivers/usb/core/inode.c: creating file '001'
[ 1.400573] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.400608] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.400616] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.400626] drivers/usb/core/inode.c: creating file '002'
[ 1.400695] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.410325] SCSI subsystem initialized
[ 1.416191] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.416220] r8169 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.416225] r8169 0000:05:00.0: enabling Mem-Wr-Inval
[ 1.416258] r8169 0000:05:00.0: (unregistered net_device): no PCI Express capability
[ 1.416537] r8169 0000:05:00.0: eth1: RTL8169sb/8110sb at 0xffffc90000656000, 00:1f:1f:07:b0:bf, XID 10000000 IRQ 20
[ 1.416552] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 1.416557] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
[ 1.416609] ehci_hcd 0000:00:1d.7: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
[ 1.420496] ehci_hcd 0000:00:1d.7: Enabling legacy PCI PM
[ 1.420508] ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported
[ 1.420511] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 1.420529] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
[ 1.420534] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.424403] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.428671] libata version 3.00 loaded.
[ 1.436025] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.436066] usb usb2: default language 0x0409
[ 1.436075] usb usb2: udev 1, busnum 2, minor = 128
[ 1.436078] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.436081] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.436086] usb usb2: Product: EHCI Host Controller
[ 1.436088] usb usb2: Manufacturer: Linux 2.6.38-git8 ehci_hcd
[ 1.436093] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.436252] usb usb2: usb_probe_device
[ 1.436256] usb usb2: configuration #1 chosen from 1 choice
[ 1.436264] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 1.436286] hub 2-0:1.0: usb_probe_interface
[ 1.436289] hub 2-0:1.0: usb_probe_interface - got id
[ 1.436291] hub 2-0:1.0: USB hub found
[ 1.436296] hub 2-0:1.0: 6 ports detected
[ 1.436298] hub 2-0:1.0: standalone hub
[ 1.436300] hub 2-0:1.0: no power switching (usb 1.0)
[ 1.436302] hub 2-0:1.0: individual port over-current protection
[ 1.436304] hub 2-0:1.0: power on to power good time: 20ms
[ 1.436309] hub 2-0:1.0: local power source is good
[ 1.436311] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 1.436369] drivers/usb/core/inode.c: creating file '001'
[ 1.436478] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.436492] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.436498] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.436510] drivers/usb/core/inode.c: creating file '003'
[ 1.436647] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.452049] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.452056] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.452058] uhci_hcd 0000:00:1a.0: Performing full reset
[ 1.452091] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 1.452171] usb usb3: default language 0x0409
[ 1.452178] usb usb3: udev 1, busnum 3, minor = 256
[ 1.452181] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.452183] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.452185] usb usb3: Product: UHCI Host Controller
[ 1.452187] usb usb3: Manufacturer: Linux 2.6.38-git8 uhci_hcd
[ 1.452189] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.452320] usb usb3: usb_probe_device
[ 1.452323] usb usb3: configuration #1 chosen from 1 choice
[ 1.452331] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 1.452357] hub 3-0:1.0: usb_probe_interface
[ 1.452359] hub 3-0:1.0: usb_probe_interface - got id
[ 1.452362] hub 3-0:1.0: USB hub found
[ 1.452366] hub 3-0:1.0: 2 ports detected
[ 1.452368] hub 3-0:1.0: standalone hub
[ 1.452370] hub 3-0:1.0: no power switching (usb 1.0)
[ 1.452372] hub 3-0:1.0: individual port over-current protection
[ 1.452374] hub 3-0:1.0: power on to power good time: 2ms
[ 1.452379] hub 3-0:1.0: local power source is good
[ 1.452381] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 1.452423] drivers/usb/core/inode.c: creating file '001'
[ 1.452457] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
[ 1.452501] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.452508] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.452512] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.452517] drivers/usb/core/inode.c: creating file '004'
[ 1.452572] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.468021] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.468026] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.468028] uhci_hcd 0000:00:1a.1: Performing full reset
[ 1.468055] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 1.468130] usb usb4: default language 0x0409
[ 1.468137] usb usb4: udev 1, busnum 4, minor = 384
[ 1.468139] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.468141] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.468143] usb usb4: Product: UHCI Host Controller
[ 1.468145] usb usb4: Manufacturer: Linux 2.6.38-git8 uhci_hcd
[ 1.468147] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.468227] usb usb4: usb_probe_device
[ 1.468229] usb usb4: configuration #1 chosen from 1 choice
[ 1.468236] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 1.468260] hub 4-0:1.0: usb_probe_interface
[ 1.468262] hub 4-0:1.0: usb_probe_interface - got id
[ 1.468265] hub 4-0:1.0: USB hub found
[ 1.468269] hub 4-0:1.0: 2 ports detected
[ 1.468271] hub 4-0:1.0: standalone hub
[ 1.468273] hub 4-0:1.0: no power switching (usb 1.0)
[ 1.468275] hub 4-0:1.0: individual port over-current protection
[ 1.468277] hub 4-0:1.0: power on to power good time: 2ms
[ 1.468281] hub 4-0:1.0: local power source is good
[ 1.468283] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 1.468325] drivers/usb/core/inode.c: creating file '001'
[ 1.468354] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
[ 1.468380] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.468386] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.468389] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.468396] drivers/usb/core/inode.c: creating file '005'
[ 1.468444] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.480022] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 1.480027] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.480029] uhci_hcd 0000:00:1a.2: Performing full reset
[ 1.480047] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[ 1.480121] usb usb5: default language 0x0409
[ 1.480128] usb usb5: udev 1, busnum 5, minor = 512
[ 1.480130] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.480133] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.480135] usb usb5: Product: UHCI Host Controller
[ 1.480137] usb usb5: Manufacturer: Linux 2.6.38-git8 uhci_hcd
[ 1.480139] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.480213] usb usb5: usb_probe_device
[ 1.480216] usb usb5: configuration #1 chosen from 1 choice
[ 1.480222] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 1.480245] hub 5-0:1.0: usb_probe_interface
[ 1.480247] hub 5-0:1.0: usb_probe_interface - got id
[ 1.480249] hub 5-0:1.0: USB hub found
[ 1.480255] hub 5-0:1.0: 2 ports detected
[ 1.480257] hub 5-0:1.0: standalone hub
[ 1.480259] hub 5-0:1.0: no power switching (usb 1.0)
[ 1.480260] hub 5-0:1.0: individual port over-current protection
[ 1.480263] hub 5-0:1.0: power on to power good time: 2ms
[ 1.480267] hub 5-0:1.0: local power source is good
[ 1.480269] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 1.480309] drivers/usb/core/inode.c: creating file '001'
[ 1.480336] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2
[ 1.480362] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.480367] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.480370] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.480375] drivers/usb/core/inode.c: creating file '006'
[ 1.480429] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.500045] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1.508023] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.508029] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.508031] uhci_hcd 0000:00:1d.0: Performing full reset
[ 1.508051] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[ 1.508127] usb usb6: default language 0x0409
[ 1.508134] usb usb6: udev 1, busnum 6, minor = 640
[ 1.508136] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.508139] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.508141] usb usb6: Product: UHCI Host Controller
[ 1.508143] usb usb6: Manufacturer: Linux 2.6.38-git8 uhci_hcd
[ 1.508145] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.508243] usb usb6: usb_probe_device
[ 1.508245] usb usb6: configuration #1 chosen from 1 choice
[ 1.508252] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 1.508275] hub 6-0:1.0: usb_probe_interface
[ 1.508277] hub 6-0:1.0: usb_probe_interface - got id
[ 1.508280] hub 6-0:1.0: USB hub found
[ 1.508284] hub 6-0:1.0: 2 ports detected
[ 1.508286] hub 6-0:1.0: standalone hub
[ 1.508288] hub 6-0:1.0: no power switching (usb 1.0)
[ 1.508290] hub 6-0:1.0: individual port over-current protection
[ 1.508292] hub 6-0:1.0: power on to power good time: 2ms
[ 1.508296] hub 6-0:1.0: local power source is good
[ 1.508299] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 1.508340] drivers/usb/core/inode.c: creating file '001'
[ 1.508376] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[ 1.508399] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.508405] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.508408] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.508413] drivers/usb/core/inode.c: creating file '007'
[ 1.508460] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.528022] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.528027] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.528029] uhci_hcd 0000:00:1d.1: Performing full reset
[ 1.528059] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[ 1.528130] usb usb7: default language 0x0409
[ 1.528137] usb usb7: udev 1, busnum 7, minor = 768
[ 1.528139] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.528142] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.528144] usb usb7: Product: UHCI Host Controller
[ 1.528146] usb usb7: Manufacturer: Linux 2.6.38-git8 uhci_hcd
[ 1.528148] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.528229] usb usb7: usb_probe_device
[ 1.528232] usb usb7: configuration #1 chosen from 1 choice
[ 1.528239] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 1.528263] hub 7-0:1.0: usb_probe_interface
[ 1.528265] hub 7-0:1.0: usb_probe_interface - got id
[ 1.528267] hub 7-0:1.0: USB hub found
[ 1.528272] hub 7-0:1.0: 2 ports detected
[ 1.528274] hub 7-0:1.0: standalone hub
[ 1.528275] hub 7-0:1.0: no power switching (usb 1.0)
[ 1.528277] hub 7-0:1.0: individual port over-current protection
[ 1.528280] hub 7-0:1.0: power on to power good time: 2ms
[ 1.528284] hub 7-0:1.0: local power source is good
[ 1.528286] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 1.528324] drivers/usb/core/inode.c: creating file '001'
[ 1.528359] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[ 1.528379] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.528384] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.528387] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.528392] drivers/usb/core/inode.c: creating file '008'
[ 1.528439] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.536039] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1.552032] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.560018] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.560023] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.560025] uhci_hcd 0000:00:1d.2: Performing full reset
[ 1.560044] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[ 1.560118] usb usb8: default language 0x0409
[ 1.560125] usb usb8: udev 1, busnum 8, minor = 896
[ 1.560127] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.560130] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.560132] usb usb8: Product: UHCI Host Controller
[ 1.560134] usb usb8: Manufacturer: Linux 2.6.38-git8 uhci_hcd
[ 1.560136] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.560216] usb usb8: usb_probe_device
[ 1.560219] usb usb8: configuration #1 chosen from 1 choice
[ 1.560226] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 1.560249] hub 8-0:1.0: usb_probe_interface
[ 1.560251] hub 8-0:1.0: usb_probe_interface - got id
[ 1.560253] hub 8-0:1.0: USB hub found
[ 1.560258] hub 8-0:1.0: 2 ports detected
[ 1.560260] hub 8-0:1.0: standalone hub
[ 1.560261] hub 8-0:1.0: no power switching (usb 1.0)
[ 1.560263] hub 8-0:1.0: individual port over-current protection
[ 1.560266] hub 8-0:1.0: power on to power good time: 2ms
[ 1.560270] hub 8-0:1.0: local power source is good
[ 1.560272] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 1.560313] drivers/usb/core/inode.c: creating file '001'
[ 1.560347] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[ 1.568042] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.580039] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.608043] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.628055] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.660063] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.756020] Refined TSC clocksource calibration: 2333.067 MHz.
[ 1.756025] Switching to clocksource tsc
[ 1.964009] ------------[ cut here ]------------
[ 1.964018] WARNING: at kernel/irq/manage.c:412 __enable_irq+0x59/0x88()
[ 1.964020] Hardware name: EP45-UD3
[ 1.964022] Unbalanced enable for IRQ 16
[ 1.964024] Modules linked in: ahci(+) libahci libata scsi_mod jmicron(+) r8169 uhci_hcd ide_pci_generic(+) floppy ide_core mii ehci_hcd
[ 1.964040] Pid: 1131, comm: modprobe Not tainted 2.6.38-git8 #1
[ 1.964042] Call Trace:
[ 1.964050] [<ffffffff8103f368>] warn_slowpath_common+0x80/0x98
[ 1.964054] [<ffffffff8103f414>] warn_slowpath_fmt+0x41/0x43
[ 1.964059] [<ffffffff8108cfd7>] __enable_irq+0x59/0x88
[ 1.964062] [<ffffffff8108d530>] enable_irq+0x57/0x70
[ 1.964073] [<ffffffffa00eda14>] ide_probe_port+0x580/0x59f [ide_core]
[ 1.964082] [<ffffffffa00edd7e>] ide_host_register+0x2ad/0x64c [ide_core]
[ 1.964106] [<ffffffffa00f2882>] ide_pci_init_two+0x58d/0x666 [ide_core]
[ 1.964111] [<ffffffff8103561e>] ? get_parent_ip+0x11/0x41
[ 1.964114] [<ffffffff8103561e>] ? get_parent_ip+0x11/0x41
[ 1.964117] [<ffffffff8103561e>] ? get_parent_ip+0x11/0x41
[ 1.964121] [<ffffffff81037b6d>] ? sub_preempt_count+0x92/0xa6
[ 1.964125] [<ffffffff813217c6>] ? _raw_spin_unlock+0x25/0x30
[ 1.964128] [<ffffffff8132073c>] ? __mutex_unlock_slowpath+0x3d/0x42
[ 1.964131] [<ffffffff8103561e>] ? get_parent_ip+0x11/0x41
[ 1.964134] [<ffffffff8103561e>] ? get_parent_ip+0x11/0x41
[ 1.964142] [<ffffffffa00f296c>] ide_pci_init_one+0x11/0x13 [ide_core]
[ 1.964147] [<ffffffffa00680ec>] jmicron_init_one+0x12/0x14 [jmicron]
[ 1.964151] [<ffffffff811c1df6>] local_pci_probe+0x48/0x91
[ 1.964155] [<ffffffff811c2bd8>] pci_device_probe+0xc5/0xf5
[ 1.964159] [<ffffffff81248ea8>] ? driver_sysfs_add+0x6b/0x90
[ 1.964162] [<ffffffff812490b3>] driver_probe_device+0x12e/0x210
[ 1.964165] [<ffffffff812491ed>] __driver_attach+0x58/0x7c
[ 1.964169] [<ffffffff81249195>] ? __driver_attach+0x0/0x7c
[ 1.964172] [<ffffffff8124857d>] bus_for_each_dev+0x4e/0x83
[ 1.964175] [<ffffffff81248dfa>] driver_attach+0x19/0x1b
[ 1.964178] [<ffffffff81248a63>] bus_add_driver+0xd5/0x222
[ 1.964181] [<ffffffff8124977d>] driver_register+0x99/0x10a
[ 1.964184] [<ffffffff811c2e36>] __pci_register_driver+0x53/0xc3
[ 1.964189] [<ffffffffa006b000>] ? jmicron_ide_init+0x0/0x20 [jmicron]
[ 1.964192] [<ffffffffa006b01e>] jmicron_ide_init+0x1e/0x20 [jmicron]
[ 1.964196] [<ffffffff81000210>] do_one_initcall+0x7a/0x134
[ 1.964201] [<ffffffff81071391>] sys_init_module+0x9c/0x1db
[ 1.964204] [<ffffffff81322252>] system_call_fastpath+0x16/0x1b
[ 1.964207] ---[ end trace 9cef210321547bfd ]---
[ 1.964246] Probing IDE interface ide1...
[ 2.532056] ide0 at 0xef00-0xef07,0xee02 on irq 16
[ 2.532115] ide1 at 0xed00-0xed07,0xec02 on irq 16
[ 2.532173] ahci 0000:03:00.0: version 3.0
[ 2.532188] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.548033] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.548038] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.548045] ahci 0000:03:00.0: setting latency timer to 64
[ 2.548371] scsi0 : ahci
[ 2.548522] scsi1 : ahci
[ 2.548622] ata1: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 19
[ 2.548626] ata2: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 19
[ 2.632011] usb usb3: suspend_rh (auto-stop)
[ 2.632030] usb usb4: suspend_rh (auto-stop)
[ 2.632049] usb usb5: suspend_rh (auto-stop)
[ 2.632067] usb usb6: suspend_rh (auto-stop)
[ 2.632085] usb usb7: suspend_rh (auto-stop)
[ 2.632109] usb usb8: suspend_rh (auto-stop)
[ 2.639850] ata_piix 0000:00:1f.2: version 2.13
[ 2.639863] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.639868] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.639915] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.640239] scsi2 : ata_piix
[ 2.640348] scsi3 : ata_piix
[ 2.640880] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 2.640885] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 2.640915] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.640920] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.640963] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.641206] scsi4 : ata_piix
[ 2.641295] scsi5 : ata_piix
[ 2.641686] ata5: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf200 irq 19
[ 2.641690] ata6: SATA max UDMA/133 cmd 0xf400 ctl 0xf300 bmdma 0xf208 irq 19
[ 2.868026] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.868064] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.970603] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.981214] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.436057] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.436069] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 3.436080] ata4.01: link offline, clearing class 3 to NONE
[ 3.444130] ata4.00: ATAPI: ATAPI iHAS222 8, 4L01, max UDMA/100
[ 3.448057] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.448067] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 3.456688] ata3.00: HPA detected: current 1953523055, native 1953525168
[ 3.456693] ata3.00: ATA-8: WDC WD1002FBYS-01A6B0, 03.00C05, max UDMA/133
[ 3.456696] ata3.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.460119] ata4.00: configured for UDMA/100
[ 3.472719] ata3.00: configured for UDMA/133
[ 3.472846] scsi 2:0:0:0: Direct-Access ATA WDC WD1002FBYS-0 03.0 PQ: 0 ANSI: 5
[ 3.474288] scsi 3:0:0:0: CD-ROM ATAPI iHAS222 8 4L01 PQ: 0 ANSI: 5
[ 3.485638] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.485641] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.485952] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.487651] sd 2:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.487721] sd 2:0:0:0: [sda] Write Protect is off
[ 3.487726] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.487763] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.491491] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.491628] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 3.520558] sda: sda1 sda2 sda3
[ 3.520888] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.784023] hub 1-0:1.0: hub_suspend
[ 3.784033] usb usb1: bus auto-suspend
[ 3.784036] ehci_hcd 0000:00:1a.7: suspend root hub
[ 3.784056] hub 2-0:1.0: hub_suspend
[ 3.784061] usb usb2: bus auto-suspend
[ 3.784063] ehci_hcd 0000:00:1d.7: suspend root hub
[ 3.784082] hub 3-0:1.0: hub_suspend
[ 3.784086] usb usb3: bus auto-suspend
[ 3.784089] usb usb3: suspend_rh
[ 3.784109] hub 4-0:1.0: hub_suspend
[ 3.784112] usb usb4: bus auto-suspend
[ 3.784114] usb usb4: suspend_rh
[ 3.784128] hub 5-0:1.0: hub_suspend
[ 3.784131] usb usb5: bus auto-suspend
[ 3.784133] usb usb5: suspend_rh
[ 3.784147] hub 6-0:1.0: hub_suspend
[ 3.784150] usb usb6: bus auto-suspend
[ 3.784152] usb usb6: suspend_rh
[ 3.784166] hub 8-0:1.0: hub_suspend
[ 3.784169] usb usb8: bus auto-suspend
[ 3.784171] usb usb8: suspend_rh
[ 3.808009] hub 7-0:1.0: hub_suspend
[ 3.808015] usb usb7: bus auto-suspend
[ 3.808018] usb usb7: suspend_rh
[ 3.895593] PM: Starting manual resume from disk
[ 3.930586] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[ 3.930590] EXT4-fs (sda2): write access will be enabled during recovery
[ 5.605377] EXT4-fs (sda2): orphan cleanup on readonly fs
[ 5.605387] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 26157071
[ 5.605421] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 26099750
[ 5.605472] EXT4-fs (sda2): 2 orphan inodes deleted
[ 5.605475] EXT4-fs (sda2): recovery complete
[ 6.051421] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.469988] udev[1352]: starting version 164
[ 7.672783] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 7.672794] ACPI: Power Button [PWRB]
[ 7.672874] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 7.672879] ACPI: Power Button [PWRF]
[ 7.776797] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 7.790554] i2c-core: driver [dummy] registered
[ 7.867898] parport_pc 00:09: reported by Plug and Play ACPI
[ 7.867944] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 7.899382] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7.899391] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 7.899424] i2c i2c-0: adapter [SMBus I801 adapter at 0500] registered
[ 7.962471] ACPI: acpi_idle registered with cpuidle
[ 8.532269] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 8.651163] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8.651240] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 8.651265] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.651269] ALSA sound/pci/hda/hda_intel.c:2538: chipset global capabilities = 0x4401
[ 8.680009] ALSA sound/pci/hda/hda_intel.c:913: codec_mask = 0x4
[ 8.680082] ALSA sound/pci/hda/hda_intel.c:1356: codec #2 probed OK
[ 8.737070] ALSA sound/pci/hda/hda_codec.c:3727: hda_codec: model '6stack-dig' is selected for config 1458:a002 (Gigabyte P35 DS3R)
[ 8.737077] ALSA sound/pci/hda/patch_realtek.c:1457: SKU: Nid=0x1d sku_cfg=0x4005e601
[ 8.737082] ALSA sound/pci/hda/patch_realtek.c:1459: SKU: port_connectivity=0x1
[ 8.737085] ALSA sound/pci/hda/patch_realtek.c:1460: SKU: enable_pcbeep=0x0
[ 8.737088] ALSA sound/pci/hda/patch_realtek.c:1461: SKU: check_sum=0x00000005
[ 8.737092] ALSA sound/pci/hda/patch_realtek.c:1462: SKU: customization=0x000000e6
[ 8.737097] ALSA sound/pci/hda/patch_realtek.c:1463: SKU: external_amp=0x0
[ 8.737100] ALSA sound/pci/hda/patch_realtek.c:1464: SKU: platform_type=0x0
[ 8.737102] ALSA sound/pci/hda/patch_realtek.c:1465: SKU: swap=0x0
[ 8.737106] ALSA sound/pci/hda/patch_realtek.c:1466: SKU: override=0x1
[ 8.739588] ALSA sound/pci/hda/hda_codec.c:2165: Cannot find slave Headphone Playback Volume, skipped
[ 8.739592] ALSA sound/pci/hda/hda_codec.c:2165: Cannot find slave Speaker Playback Volume, skipped
[ 8.739595] ALSA sound/pci/hda/hda_codec.c:2165: Cannot find slave Mono Playback Volume, skipped
[ 8.739599] ALSA sound/pci/hda/hda_codec.c:2165: Cannot find slave Line-Out Playback Volume, skipped
[ 8.739602] ALSA sound/pci/hda/hda_codec.c:2165: Cannot find slave PCM Playback Volume, skipped
[ 8.739614] ALSA sound/pci/hda/hda_codec.c:2165: Cannot find slave Speaker Playback Switch, skipped
[ 8.739617] ALSA sound/pci/hda/hda_codec.c:2165: Cannot find slave Mono Playback Switch, skipped
[ 8.739623] ALSA sound/pci/hda/hda_codec.c:2165: Cannot find slave Line-Out Playback Switch, skipped
[ 8.739626] ALSA sound/pci/hda/hda_codec.c:2165: Cannot find slave PCM Playback Switch, skipped
[ 9.591252] Adding 9462280k swap on /dev/sda3. Priority:-1 extents:1 across:9462280k
[ 9.595573] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 9.767512] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 9.849806] loop: module loaded
[ 9.870779] it87: Found IT8718F chip at 0x290, revision 5
[ 9.870786] it87: VID is disabled (pins used for GPIO)
[ 9.870796] it87: Beeping is supported
[ 10.548174] EXT3-fs: barriers not enabled
[ 10.558044] kjournald starting. Commit interval 5 seconds
[ 10.558278] EXT3-fs (sda1): using internal journal
[ 10.558282] EXT3-fs (sda1): mounted filesystem with writeback data mode
[ 11.592585] IPv4 FIB: Using LC-trie version 0.409
[ 12.053973] fuse init (API version 7.16)
[ 12.201020] r8169 0000:05:00.0: eth1: link down
[ 12.653448] r8169 0000:04:00.0: eth0: link down
[ 12.653460] r8169 0000:04:00.0: eth0: link down
[ 13.752157] lp0: using parport0 (interrupt-driven).
[ 13.752160] lp0: console ready
[ 13.760893] ppdev: user-space parallel port driver
[ 17.012820] Bluetooth: Core ver 2.16
[ 17.012852] NET: Registered protocol family 31
[ 17.012854] Bluetooth: HCI device and connection manager initialized
[ 17.012857] Bluetooth: HCI socket layer initialized
[ 24.720080] sshd (3027): /proc/3027/oom_adj is deprecated, please use /proc/3027/oom_score_adj instead.
[ 64.747563] r8169 0000:04:00.0: eth0: link down
[ 64.747570] r8169 0000:04:00.0: eth0: link down
[ 154.320623] r8169 0000:04:00.0: eth0: link down
[ 154.320633] r8169 0000:04:00.0: eth0: link down
[-- Attachment #3: dmesg.GOOD.txt --]
[-- Type: text/plain, Size: 87934 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-git3 (root@aapi205) (gcc version 4.4.5 (Debian 4.4.5-10) ) #1 SMP PREEMPT Thu Mar 17 11:26:43 CET 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.38-git3 root=UUID=cdb6c166-b027-4a29-87fa-93d604dc5e53 ro all_generic_ata quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee2000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. EP45-UD3/EP45-UD3, BIOS F10b 08/05/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 100000000 mask FE0000000 write-back
[ 0.000000] 3 base 0DFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f5670] f5670
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfee0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfee0000 @ dfeda000-dfee0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ 11fffa000-120000000
[ 0.000000] RAMDISK: 37556000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f7080 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000dfee2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000dfee20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000dfee2180 04D29 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000dfee0000 00040
[ 0.000000] ACPI: HPET 00000000dfee7000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000dfee7080 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: EUDS 00000000dfee70c0 004D0 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000dfee7590 06852 (v01 GBT GBT B0 5455312E BG?? 00020101)
[ 0.000000] ACPI: APIC 00000000dfee6f00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000dfeee720 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011ffeb000 - 000000011fff9fff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b600000-ffff88011effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfee0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048175
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 898840 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee2000
[ 0.000000] PM: Registered nosave memory: 00000000dfee2000 - 00000000dfef0000
[ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:14100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s79488 r8192 d22912 u524288
[ 0.000000] pcpu-alloc: s79488 r8192 d22912 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032042
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-git3 root=UUID=cdb6c166-b027-4a29-87fa-93d604dc5e53 ro all_generic_ata quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4047112k/4718592k available (3204k kernel code, 525892k absent, 145588k reserved, 3687k data, 584k init)
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2332.914 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4665.82 BogoMIPS (lpj=9331656)
[ 0.004008] pid_max: default: 32768 minimum: 301
[ 0.004060] Security Framework initialized
[ 0.004070] SELinux: Disabled at boot.
[ 0.004409] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008115] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008805] Mount-cache hash table entries: 256
[ 0.008943] Initializing cgroup subsys ns
[ 0.008946] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.008949] Initializing cgroup subsys cpuacct
[ 0.008954] Initializing cgroup subsys devices
[ 0.008957] Initializing cgroup subsys blkio
[ 0.008997] CPU: Physical Processor ID: 0
[ 0.008998] CPU: Processor Core ID: 0
[ 0.009000] mce: CPU supports 6 MCE banks
[ 0.009008] CPU0: Thermal monitoring enabled (TM2)
[ 0.009012] using mwait in idle threads.
[ 0.009772] ACPI: Core revision 20110112
[ 0.012997] Setting APIC routing to flat
[ 0.013298] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052996] CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 07
[ 0.056003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.056003] ... version: 2
[ 0.056003] ... bit width: 40
[ 0.056003] ... generic registers: 2
[ 0.056003] ... value mask: 000000ffffffffff
[ 0.056003] ... max period: 000000007fffffff
[ 0.056003] ... fixed-purpose events: 3
[ 0.056003] ... event mask: 0000000700000003
[ 0.076022] Booting Node 0, Processors #1
[ 0.076026] smpboot cpu 1: start_ip = 9a000
[ 0.176037] #2
[ 0.176039] smpboot cpu 2: start_ip = 9a000
[ 0.276040] #3 Ok.
[ 0.276042] smpboot cpu 3: start_ip = 9a000
[ 0.368031] Brought up 4 CPUs
[ 0.368034] Total of 4 processors activated (18664.09 BogoMIPS).
[ 0.369333] devtmpfs: initialized
[ 0.374119] print_constraints: dummy:
[ 0.374119] NET: Registered protocol family 16
[ 0.374119] ACPI: bus type pci registered
[ 0.376062] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.376062] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.382692] PCI: Using configuration type 1 for base access
[ 0.384214] bio: create slab <bio-0> at 0
[ 0.388184] ACPI: EC: Look up EC in DSDT
[ 0.392198] ACPI Warning: Incorrect checksum in table [TAMG] - 0x14, should be 0x13 (20110112/tbutils-314)
[ 0.392405] ACPI: SSDT 00000000dfeede40 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.392658] ACPI: Dynamic OEM Table Load:
[ 0.392661] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.392843] ACPI: SSDT 00000000dfeee300 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.393085] ACPI: Dynamic OEM Table Load:
[ 0.393088] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.393275] ACPI: SSDT 00000000dfeee460 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
[ 0.393518] ACPI: Dynamic OEM Table Load:
[ 0.393521] ACPI: SSDT (null) 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
[ 0.393707] ACPI: SSDT 00000000dfeee5c0 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 0.393951] ACPI: Dynamic OEM Table Load:
[ 0.393954] ACPI: SSDT (null) 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 0.394146] ACPI: Interpreter enabled
[ 0.394149] ACPI: (supports S0 S3 S4 S5)
[ 0.394170] ACPI: Using IOAPIC for interrupt routing
[ 0.400461] ACPI: No dock devices found.
[ 0.400461] HEST: Table not found.
[ 0.400461] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.404066] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.404112] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.404114] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.404116] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.404119] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.404121] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff]
[ 0.404126] pci_bus 0000:00: scanning bus
[ 0.404135] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
[ 0.404141] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.404160] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x166
[ 0.404164] pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404186] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
[ 0.404189] pci 0000:00:01.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.404206] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x166
[ 0.404209] pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404223] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.404226] pci 0000:00:01.0: PME# disabled
[ 0.404263] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.404269] pci 0000:00:1a.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.404305] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
[ 0.404323] pci 0000:00:1a.0: calling quirk_resource_alignment+0x0/0x166
[ 0.404326] pci 0000:00:1a.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404353] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.404360] pci 0000:00:1a.1: calling quirk_mmio_always_on+0x0/0x17
[ 0.404395] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
[ 0.404413] pci 0000:00:1a.1: calling quirk_resource_alignment+0x0/0x166
[ 0.404416] pci 0000:00:1a.1: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404443] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.404450] pci 0000:00:1a.2: calling quirk_mmio_always_on+0x0/0x17
[ 0.404485] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f]
[ 0.404503] pci 0000:00:1a.2: calling quirk_resource_alignment+0x0/0x166
[ 0.404506] pci 0000:00:1a.2: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404537] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.404544] pci 0000:00:1a.7: calling quirk_mmio_always_on+0x0/0x17
[ 0.404556] pci 0000:00:1a.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.404604] pci 0000:00:1a.7: calling quirk_resource_alignment+0x0/0x166
[ 0.404607] pci 0000:00:1a.7: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404639] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.404642] pci 0000:00:1b.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.404656] pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
[ 0.404690] pci 0000:00:1b.0: calling quirk_resource_alignment+0x0/0x166
[ 0.404693] pci 0000:00:1b.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404712] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.404716] pci 0000:00:1b.0: PME# disabled
[ 0.404735] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.404738] pci 0000:00:1c.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.404770] pci 0000:00:1c.0: calling quirk_resource_alignment+0x0/0x166
[ 0.404773] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404794] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.404798] pci 0000:00:1c.0: PME# disabled
[ 0.404820] pci 0000:00:1c.3: [8086:3a46] type 1 class 0x000604
[ 0.404823] pci 0000:00:1c.3: calling quirk_mmio_always_on+0x0/0x17
[ 0.404854] pci 0000:00:1c.3: calling quirk_resource_alignment+0x0/0x166
[ 0.404857] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404879] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.404882] pci 0000:00:1c.3: PME# disabled
[ 0.404902] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[ 0.404906] pci 0000:00:1c.4: calling quirk_mmio_always_on+0x0/0x17
[ 0.404937] pci 0000:00:1c.4: calling quirk_resource_alignment+0x0/0x166
[ 0.404940] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.404962] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.404965] pci 0000:00:1c.4: PME# disabled
[ 0.404989] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.404995] pci 0000:00:1d.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.405031] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f]
[ 0.405049] pci 0000:00:1d.0: calling quirk_resource_alignment+0x0/0x166
[ 0.405052] pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.405079] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.405086] pci 0000:00:1d.1: calling quirk_mmio_always_on+0x0/0x17
[ 0.405121] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f]
[ 0.405139] pci 0000:00:1d.1: calling quirk_resource_alignment+0x0/0x166
[ 0.405142] pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.405169] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.405175] pci 0000:00:1d.2: calling quirk_mmio_always_on+0x0/0x17
[ 0.405211] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f]
[ 0.405229] pci 0000:00:1d.2: calling quirk_resource_alignment+0x0/0x166
[ 0.405232] pci 0000:00:1d.2: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.405263] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.405270] pci 0000:00:1d.7: calling quirk_mmio_always_on+0x0/0x17
[ 0.405282] pci 0000:00:1d.7: reg 10: [mem 0xfdffe000-0xfdffe3ff]
[ 0.405330] pci 0000:00:1d.7: calling quirk_resource_alignment+0x0/0x166
[ 0.405333] pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.405361] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.405367] pci 0000:00:1e.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.405392] pci 0000:00:1e.0: calling quirk_resource_alignment+0x0/0x166
[ 0.405396] pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.405422] pci 0000:00:1f.0: [8086:3a18] type 0 class 0x000601
[ 0.405430] pci 0000:00:1f.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.405496] pci 0000:00:1f.0: calling quirk_resource_alignment+0x0/0x166
[ 0.405499] pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.405532] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
[ 0.405539] pci 0000:00:1f.2: calling quirk_mmio_always_on+0x0/0x17
[ 0.405549] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.405556] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.405564] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.405571] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.405579] pci 0000:00:1f.2: reg 20: [io 0xf900-0xf90f]
[ 0.405586] pci 0000:00:1f.2: reg 24: [io 0xf800-0xf80f]
[ 0.405597] pci 0000:00:1f.2: calling quirk_resource_alignment+0x0/0x166
[ 0.405601] pci 0000:00:1f.2: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.405627] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.405631] pci 0000:00:1f.3: calling quirk_mmio_always_on+0x0/0x17
[ 0.405644] pci 0000:00:1f.3: reg 10: [mem 0xfdffd000-0xfdffd0ff 64bit]
[ 0.405663] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.405680] pci 0000:00:1f.3: calling quirk_resource_alignment+0x0/0x166
[ 0.405683] pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.405700] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
[ 0.405708] pci 0000:00:1f.5: calling quirk_mmio_always_on+0x0/0x17
[ 0.405717] pci 0000:00:1f.5: reg 10: [io 0xf600-0xf607]
[ 0.405725] pci 0000:00:1f.5: reg 14: [io 0xf500-0xf503]
[ 0.405732] pci 0000:00:1f.5: reg 18: [io 0xf400-0xf407]
[ 0.405740] pci 0000:00:1f.5: reg 1c: [io 0xf300-0xf303]
[ 0.405747] pci 0000:00:1f.5: reg 20: [io 0xf200-0xf20f]
[ 0.405754] pci 0000:00:1f.5: reg 24: [io 0xf100-0xf10f]
[ 0.405766] pci 0000:00:1f.5: calling quirk_resource_alignment+0x0/0x166
[ 0.405769] pci 0000:00:1f.5: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.405791] pci_bus 0000:00: fixups for bus
[ 0.405794] pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 0
[ 0.405817] pci_bus 0000:01: scanning bus
[ 0.405831] pci 0000:01:00.0: [10de:0641] type 0 class 0x000300
[ 0.405835] pci 0000:01:00.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.405844] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.405854] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.405865] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.405872] pci 0000:01:00.0: reg 24: [io 0xbf00-0xbf7f]
[ 0.405880] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.405885] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x166
[ 0.405926] pci_bus 0000:01: fixups for bus
[ 0.405928] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.405931] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.405934] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.405938] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.405940] pci_bus 0000:01: bus scan returning with max=01
[ 0.405944] pci 0000:00:1c.0: scanning [bus 02-02] behind bridge, pass 0
[ 0.405978] pci_bus 0000:02: scanning bus
[ 0.405980] pci_bus 0000:02: fixups for bus
[ 0.405982] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.405986] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.405990] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.405996] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.405998] pci_bus 0000:02: bus scan returning with max=02
[ 0.406002] pci 0000:00:1c.3: scanning [bus 03-03] behind bridge, pass 0
[ 0.406035] pci_bus 0000:03: scanning bus
[ 0.406055] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
[ 0.406061] pci 0000:03:00.0: calling quirk_jmicron_ata+0x0/0x100
[ 0.406074] pci 0000:03:00.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.406147] pci 0000:03:00.0: reg 24: [mem 0xfddfe000-0xfddfffff]
[ 0.406165] pci 0000:03:00.0: calling quirk_resource_alignment+0x0/0x166
[ 0.406193] pci 0000:03:00.0: PME# supported from D3hot
[ 0.406198] pci 0000:03:00.0: PME# disabled
[ 0.406227] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.406237] pci 0000:03:00.1: calling quirk_jmicron_ata+0x0/0x100
[ 0.406239] pci 0000:03:00.1: calling quirk_mmio_always_on+0x0/0x17
[ 0.406256] pci 0000:03:00.1: reg 10: [io 0xef00-0xef07]
[ 0.406270] pci 0000:03:00.1: reg 14: [io 0xee00-0xee03]
[ 0.406283] pci 0000:03:00.1: reg 18: [io 0xed00-0xed07]
[ 0.406296] pci 0000:03:00.1: reg 1c: [io 0xec00-0xec03]
[ 0.406309] pci 0000:03:00.1: reg 20: [io 0xeb00-0xeb0f]
[ 0.406340] pci 0000:03:00.1: calling quirk_resource_alignment+0x0/0x166
[ 0.406380] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.406393] pci_bus 0000:03: fixups for bus
[ 0.406395] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.406398] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.406402] pci 0000:00:1c.3: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.406408] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.406410] pci_bus 0000:03: bus scan returning with max=03
[ 0.406414] pci 0000:00:1c.4: scanning [bus 04-04] behind bridge, pass 0
[ 0.406448] pci_bus 0000:04: scanning bus
[ 0.406468] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.406473] pci 0000:04:00.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.406487] pci 0000:04:00.0: reg 10: [io 0xde00-0xdeff]
[ 0.406514] pci 0000:04:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref]
[ 0.406532] pci 0000:04:00.0: reg 20: [mem 0xfdee0000-0xfdeeffff 64bit pref]
[ 0.406544] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.406550] pci 0000:04:00.0: calling quirk_resource_alignment+0x0/0x166
[ 0.406584] pci 0000:04:00.0: supports D1 D2
[ 0.406586] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.406591] pci 0000:04:00.0: PME# disabled
[ 0.412040] pci_bus 0000:04: fixups for bus
[ 0.412043] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.412047] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.412052] pci 0000:00:1c.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.412058] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.412060] pci_bus 0000:04: bus scan returning with max=04
[ 0.412065] pci 0000:00:1e.0: scanning [bus 05-05] behind bridge, pass 0
[ 0.412085] pci_bus 0000:05: scanning bus
[ 0.412099] pci 0000:05:00.0: [10ec:8169] type 0 class 0x000200
[ 0.412107] pci 0000:05:00.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.412120] pci 0000:05:00.0: reg 10: [io 0xce00-0xceff]
[ 0.412146] pci 0000:05:00.0: reg 14: [mem 0xfdcff000-0xfdcff0ff]
[ 0.412186] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.412191] pci 0000:05:00.0: calling quirk_resource_alignment+0x0/0x166
[ 0.412207] pci 0000:05:00.0: supports D1 D2
[ 0.412209] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.412213] pci 0000:05:00.0: PME# disabled
[ 0.412237] pci 0000:05:07.0: [104c:8024] type 0 class 0x000c00
[ 0.412245] pci 0000:05:07.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.412257] pci 0000:05:07.0: reg 10: [mem 0xfdcfe000-0xfdcfe7ff]
[ 0.412267] pci 0000:05:07.0: reg 14: [mem 0xfdcf8000-0xfdcfbfff]
[ 0.412311] pci 0000:05:07.0: calling quirk_resource_alignment+0x0/0x166
[ 0.412327] pci 0000:05:07.0: supports D1 D2
[ 0.412329] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.412333] pci 0000:05:07.0: PME# disabled
[ 0.412367] pci_bus 0000:05: fixups for bus
[ 0.412369] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.412373] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.412377] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.412382] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.412385] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.412388] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.412390] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.412393] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.412395] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
[ 0.412398] pci_bus 0000:05: bus scan returning with max=05
[ 0.412402] pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 1
[ 0.412406] pci 0000:00:1c.0: scanning [bus 02-02] behind bridge, pass 1
[ 0.412412] pci 0000:00:1c.3: scanning [bus 03-03] behind bridge, pass 1
[ 0.412417] pci 0000:00:1c.4: scanning [bus 04-04] behind bridge, pass 1
[ 0.412423] pci 0000:00:1e.0: scanning [bus 05-05] behind bridge, pass 1
[ 0.412427] pci_bus 0000:00: bus scan returning with max=05
[ 0.412431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.412590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.412638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.412693] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.412737] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.412892] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.424693] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.424693] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.424693] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.424693] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.424693] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.424693] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.424693] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.424693] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.424693] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.424693] vgaarb: loaded
[ 0.428054] usbcore: registered new interface driver usbfs
[ 0.428054] usbcore: registered new interface driver hub
[ 0.428062] usbcore: registered new device driver usb
[ 0.428062] PCI: Using ACPI for IRQ routing
[ 0.428062] PCI: pci_cache_line_size set to 64 bytes
[ 0.428062] pci 0000:00:1a.0: BAR 4: reserving [io 0xff00-0xff1f flags 0x40101] (d=0, p=0)
[ 0.428062] pci 0000:00:1a.1: BAR 4: reserving [io 0xfe00-0xfe1f flags 0x40101] (d=0, p=0)
[ 0.428062] pci 0000:00:1a.2: BAR 4: reserving [io 0xfd00-0xfd1f flags 0x40101] (d=0, p=0)
[ 0.428063] pci 0000:00:1a.7: BAR 0: reserving [mem 0xfdfff000-0xfdfff3ff flags 0x40200] (d=0, p=0)
[ 0.428068] pci 0000:00:1b.0: BAR 0: reserving [mem 0xfdff8000-0xfdffbfff flags 0x140204] (d=0, p=0)
[ 0.428078] pci 0000:00:1d.0: BAR 4: reserving [io 0xfc00-0xfc1f flags 0x40101] (d=0, p=0)
[ 0.428083] pci 0000:00:1d.1: BAR 4: reserving [io 0xfb00-0xfb1f flags 0x40101] (d=0, p=0)
[ 0.428088] pci 0000:00:1d.2: BAR 4: reserving [io 0xfa00-0xfa1f flags 0x40101] (d=0, p=0)
[ 0.428093] pci 0000:00:1d.7: BAR 0: reserving [mem 0xfdffe000-0xfdffe3ff flags 0x40200] (d=0, p=0)
[ 0.428101] pci 0000:00:1f.2: BAR 0: reserving [io 0x01f0-0x01f7 flags 0x110] (d=0, p=0)
[ 0.428104] pci 0000:00:1f.2: BAR 1: reserving [io 0x03f6 flags 0x110] (d=0, p=0)
[ 0.428107] pci 0000:00:1f.2: BAR 2: reserving [io 0x0170-0x0177 flags 0x110] (d=0, p=0)
[ 0.428110] pci 0000:00:1f.2: BAR 3: reserving [io 0x0376 flags 0x110] (d=0, p=0)
[ 0.428113] pci 0000:00:1f.2: BAR 4: reserving [io 0xf900-0xf90f flags 0x40101] (d=0, p=0)
[ 0.428116] pci 0000:00:1f.2: BAR 5: reserving [io 0xf800-0xf80f flags 0x40101] (d=0, p=0)
[ 0.428120] pci 0000:00:1f.3: BAR 0: reserving [mem 0xfdffd000-0xfdffd0ff flags 0x140204] (d=0, p=0)
[ 0.428124] pci 0000:00:1f.3: BAR 4: reserving [io 0x0500-0x051f flags 0x40101] (d=0, p=0)
[ 0.428128] pci 0000:00:1f.5: BAR 0: reserving [io 0xf600-0xf607 flags 0x40101] (d=0, p=0)
[ 0.428132] pci 0000:00:1f.5: BAR 1: reserving [io 0xf500-0xf503 flags 0x40101] (d=0, p=0)
[ 0.428134] pci 0000:00:1f.5: BAR 2: reserving [io 0xf400-0xf407 flags 0x40101] (d=0, p=0)
[ 0.428137] pci 0000:00:1f.5: BAR 3: reserving [io 0xf300-0xf303 flags 0x40101] (d=0, p=0)
[ 0.428140] pci 0000:00:1f.5: BAR 4: reserving [io 0xf200-0xf20f flags 0x40101] (d=0, p=0)
[ 0.428143] pci 0000:00:1f.5: BAR 5: reserving [io 0xf100-0xf10f flags 0x40101] (d=0, p=0)
[ 0.428148] pci 0000:01:00.0: BAR 0: reserving [mem 0xfa000000-0xfaffffff flags 0x40200] (d=0, p=0)
[ 0.428151] pci 0000:01:00.0: BAR 1: reserving [mem 0xe0000000-0xefffffff flags 0x14220c] (d=0, p=0)
[ 0.428154] pci 0000:01:00.0: BAR 3: reserving [mem 0xf8000000-0xf9ffffff flags 0x140204] (d=0, p=0)
[ 0.428157] pci 0000:01:00.0: BAR 5: reserving [io 0xbf00-0xbf7f flags 0x40101] (d=0, p=0)
[ 0.428163] pci 0000:03:00.0: BAR 5: reserving [mem 0xfddfe000-0xfddfffff flags 0x40200] (d=0, p=0)
[ 0.428171] pci 0000:04:00.0: BAR 0: reserving [io 0xde00-0xdeff flags 0x40101] (d=0, p=0)
[ 0.428174] pci 0000:04:00.0: BAR 2: reserving [mem 0xfdeff000-0xfdefffff flags 0x14220c] (d=0, p=0)
[ 0.428177] pci 0000:04:00.0: BAR 4: reserving [mem 0xfdee0000-0xfdeeffff flags 0x14220c] (d=0, p=0)
[ 0.428182] pci 0000:05:00.0: BAR 0: reserving [io 0xce00-0xceff flags 0x40101] (d=0, p=0)
[ 0.428185] pci 0000:05:00.0: BAR 1: reserving [mem 0xfdcff000-0xfdcff0ff flags 0x40200] (d=0, p=0)
[ 0.428190] pci 0000:05:07.0: BAR 0: reserving [mem 0xfdcfe000-0xfdcfe7ff flags 0x40200] (d=0, p=0)
[ 0.428193] pci 0000:05:07.0: BAR 1: reserving [mem 0xfdcf8000-0xfdcfbfff flags 0x40200] (d=0, p=0)
[ 0.428234] pci 0000:03:00.1: BAR 0: reserving [io 0xef00-0xef07 flags 0x40101] (d=1, p=1)
[ 0.428237] pci 0000:03:00.1: BAR 1: reserving [io 0xee00-0xee03 flags 0x40101] (d=1, p=1)
[ 0.428240] pci 0000:03:00.1: BAR 2: reserving [io 0xed00-0xed07 flags 0x40101] (d=1, p=1)
[ 0.428242] pci 0000:03:00.1: BAR 3: reserving [io 0xec00-0xec03 flags 0x40101] (d=1, p=1)
[ 0.428245] pci 0000:03:00.1: BAR 4: reserving [io 0xeb00-0xeb0f flags 0x40101] (d=1, p=1)
[ 0.428255] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.428258] reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff
[ 0.428278] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.428278] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.428278] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.444063] Switching to clocksource hpet
[ 0.447908] Switched to NOHz mode on CPU #0
[ 0.447949] Switched to NOHz mode on CPU #2
[ 0.447953] Switched to NOHz mode on CPU #3
[ 0.448028] Switched to NOHz mode on CPU #1
[ 0.452061] pnp: PnP ACPI init
[ 0.452077] ACPI: bus type pnp registered
[ 0.452181] pnp 00:00: [bus 00-3f]
[ 0.452184] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.452186] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.452188] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.452191] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.452193] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.452195] pnp 00:00: [mem 0xdff00000-0xfebfffff window]
[ 0.452323] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.452423] pnp 00:01: [io 0x0010-0x001f]
[ 0.452426] pnp 00:01: [io 0x0022-0x003f]
[ 0.452428] pnp 00:01: [io 0x0044-0x005f]
[ 0.452430] pnp 00:01: [io 0x0062-0x0063]
[ 0.452432] pnp 00:01: [io 0x0065-0x006f]
[ 0.452435] pnp 00:01: [io 0x0074-0x007f]
[ 0.452437] pnp 00:01: [io 0x0091-0x0093]
[ 0.452439] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.452441] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.452443] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.452445] pnp 00:01: [io 0x0290-0x029f]
[ 0.452447] pnp 00:01: [io 0x0800-0x087f]
[ 0.452449] pnp 00:01: [io 0x0290-0x0294]
[ 0.452451] pnp 00:01: [io 0x0880-0x088f]
[ 0.452596] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.452599] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.452602] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.452605] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.452607] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.452611] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.452625] pnp 00:02: [dma 4]
[ 0.452628] pnp 00:02: [io 0x0000-0x000f]
[ 0.452629] pnp 00:02: [io 0x0080-0x0090]
[ 0.452631] pnp 00:02: [io 0x0094-0x009f]
[ 0.452633] pnp 00:02: [io 0x00c0-0x00df]
[ 0.452715] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.452772] pnp 00:03: [irq 0 disabled]
[ 0.452783] pnp 00:03: [irq 8]
[ 0.452785] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.452874] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.452907] pnp 00:04: [io 0x0070-0x0073]
[ 0.452994] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.453006] pnp 00:05: [io 0x0061]
[ 0.453088] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.453100] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.453105] pnp 00:06: [irq 13]
[ 0.453193] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.453323] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.453326] pnp 00:07: [io 0x03f7]
[ 0.453331] pnp 00:07: [irq 6]
[ 0.453333] pnp 00:07: [dma 2]
[ 0.453436] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.453610] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.453617] pnp 00:08: [irq 4]
[ 0.453731] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.453928] pnp 00:09: [io 0x0378-0x037f]
[ 0.453933] pnp 00:09: [irq 7]
[ 0.454044] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.454153] pnp 00:0a: [irq 12]
[ 0.454241] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.454269] pnp 00:0b: [io 0x0060]
[ 0.454271] pnp 00:0b: [io 0x0064]
[ 0.454276] pnp 00:0b: [irq 1]
[ 0.454367] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.454406] pnp 00:0c: [io 0x0400-0x04cf]
[ 0.454409] pnp 00:0c: [io 0x04d2-0x04ff]
[ 0.454525] system 00:0c: [io 0x0400-0x04cf] has been reserved
[ 0.454528] system 00:0c: [io 0x04d2-0x04ff] has been reserved
[ 0.454531] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454761] pnp 00:0d: [mem 0xf4000000-0xf7ffffff]
[ 0.454898] system 00:0d: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.454901] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.455085] pnp 00:0e: [mem 0x000ce000-0x000cffff]
[ 0.455088] pnp 00:0e: [mem 0x000f0000-0x000f7fff]
[ 0.455090] pnp 00:0e: [mem 0x000f8000-0x000fbfff]
[ 0.455092] pnp 00:0e: [mem 0x000fc000-0x000fffff]
[ 0.455094] pnp 00:0e: [mem 0xdfee0000-0xdfeeffff]
[ 0.455097] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.455099] pnp 00:0e: [mem 0x00100000-0xdfedffff]
[ 0.455101] pnp 00:0e: [mem 0xdfef0000-0xdfefffff]
[ 0.455103] pnp 00:0e: [mem 0xfec00000-0xfec00fff]
[ 0.455105] pnp 00:0e: [mem 0xfed10000-0xfed1dfff]
[ 0.455107] pnp 00:0e: [mem 0xfed20000-0xfed8ffff]
[ 0.455109] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
[ 0.455111] pnp 00:0e: [mem 0xffb00000-0xffb7ffff]
[ 0.455113] pnp 00:0e: [mem 0xfff00000-0xffffffff]
[ 0.455115] pnp 00:0e: [mem 0x000e0000-0x000effff]
[ 0.455258] system 00:0e: [mem 0x000ce000-0x000cffff] has been reserved
[ 0.455262] system 00:0e: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.455265] system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.455268] system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.455271] system 00:0e: [mem 0xdfee0000-0xdfeeffff] could not be reserved
[ 0.455274] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.455277] system 00:0e: [mem 0x00100000-0xdfedffff] could not be reserved
[ 0.455280] system 00:0e: [mem 0xdfef0000-0xdfefffff] has been reserved
[ 0.455283] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.455285] system 00:0e: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.455288] system 00:0e: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.455291] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.455294] system 00:0e: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.455297] system 00:0e: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.455300] system 00:0e: [mem 0x000e0000-0x000effff] has been reserved
[ 0.455303] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.455326] pnp 00:0f: [mem 0xffb80000-0xffbfffff]
[ 0.455430] pnp 00:0f: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.455437] pnp: PnP ACPI: found 16 devices
[ 0.455438] ACPI: ACPI bus type pnp unregistered
[ 0.466209] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
[ 0.466213] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.466217] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.466221] pci 0000:00:1e.0: BAR 15: assigned [mem 0xdff00000-0xdfffffff pref]
[ 0.466225] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.466229] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
[ 0.466232] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.466235] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.466238] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.466242] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.466246] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.466249] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.466253] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff]
[ 0.466257] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.466263] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.466266] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.466270] pci 0000:00:1c.3: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.466274] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.466281] pci 0000:04:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref]
[ 0.466283] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.466286] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.466290] pci 0000:00:1c.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.466294] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.466301] pci 0000:05:00.0: BAR 6: assigned [mem 0xdff00000-0xdff0ffff pref]
[ 0.466303] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.466306] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.466310] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.466314] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xdfffffff pref]
[ 0.466331] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.466335] pci 0000:00:01.0: setting latency timer to 64
[ 0.466341] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.466345] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.466348] pci 0000:00:1c.0: enabling bus mastering
[ 0.466351] pci 0000:00:1c.0: setting latency timer to 64
[ 0.466363] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.466367] pci 0000:00:1c.3: setting latency timer to 64
[ 0.466372] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.466376] pci 0000:00:1c.4: setting latency timer to 64
[ 0.466382] pci 0000:00:1e.0: setting latency timer to 64
[ 0.466386] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.466388] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.466390] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.466392] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.466395] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff]
[ 0.466397] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.466399] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.466402] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.466404] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.466406] pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf01fffff]
[ 0.466409] pci_bus 0000:02: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.466411] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.466413] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.466415] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.466418] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.466420] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.466422] pci_bus 0000:04: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.466425] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 0.466427] pci_bus 0000:05: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.466429] pci_bus 0000:05: resource 2 [mem 0xdff00000-0xdfffffff pref]
[ 0.466431] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.466433] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.466435] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.466438] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.466440] pci_bus 0000:05: resource 8 [mem 0xdff00000-0xfebfffff]
[ 0.466571] NET: Registered protocol family 2
[ 0.466756] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.467902] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.470690] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.471030] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.471033] TCP reno registered
[ 0.471044] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.471075] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.471286] NET: Registered protocol family 1
[ 0.471304] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x145
[ 0.471308] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.471312] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.471315] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xad
[ 0.471321] pci 0000:00:01.0: calling quirk_e100_interrupt+0x0/0x145
[ 0.471324] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.471327] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.471330] pci 0000:00:01.0: calling pci_fixup_video+0x0/0xad
[ 0.471334] pci 0000:00:1a.0: calling quirk_e100_interrupt+0x0/0x145
[ 0.471337] pci 0000:00:1a.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.471340] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.471345] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f10
[ 0.471347] pci 0000:00:1a.0: Performing full reset
[ 0.471359] pci 0000:00:1a.0: calling pci_fixup_video+0x0/0xad
[ 0.471364] pci 0000:00:1a.1: calling quirk_e100_interrupt+0x0/0x145
[ 0.471367] pci 0000:00:1a.1: calling quirk_cardbus_legacy+0x0/0x22
[ 0.471370] pci 0000:00:1a.1: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.471375] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.471376] pci 0000:00:1a.1: Performing full reset
[ 0.471388] pci 0000:00:1a.1: calling pci_fixup_video+0x0/0xad
[ 0.471393] pci 0000:00:1a.2: calling quirk_e100_interrupt+0x0/0x145
[ 0.471396] pci 0000:00:1a.2: calling quirk_cardbus_legacy+0x0/0x22
[ 0.471399] pci 0000:00:1a.2: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.471403] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.471405] pci 0000:00:1a.2: Performing full reset
[ 0.471417] pci 0000:00:1a.2: calling pci_fixup_video+0x0/0xad
[ 0.471422] pci 0000:00:1a.7: calling quirk_e100_interrupt+0x0/0x145
[ 0.471425] pci 0000:00:1a.7: calling quirk_cardbus_legacy+0x0/0x22
[ 0.471428] pci 0000:00:1a.7: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.471448] pci 0000:00:1a.7: EHCI: BIOS handoff
[ 0.484024] pci 0000:00:1a.7: calling pci_fixup_video+0x0/0xad
[ 0.484031] pci 0000:00:1b.0: calling quirk_e100_interrupt+0x0/0x145
[ 0.484034] pci 0000:00:1b.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.484038] pci 0000:00:1b.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.484041] pci 0000:00:1b.0: calling pci_fixup_video+0x0/0xad
[ 0.484047] pci 0000:00:1c.0: calling quirk_e100_interrupt+0x0/0x145
[ 0.484050] pci 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.484054] pci 0000:00:1c.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.484057] pci 0000:00:1c.0: calling pci_fixup_video+0x0/0xad
[ 0.484063] pci 0000:00:1c.3: calling quirk_e100_interrupt+0x0/0x145
[ 0.484066] pci 0000:00:1c.3: calling quirk_cardbus_legacy+0x0/0x22
[ 0.484069] pci 0000:00:1c.3: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.484073] pci 0000:00:1c.3: calling pci_fixup_video+0x0/0xad
[ 0.484078] pci 0000:00:1c.4: calling quirk_e100_interrupt+0x0/0x145
[ 0.484082] pci 0000:00:1c.4: calling quirk_cardbus_legacy+0x0/0x22
[ 0.484085] pci 0000:00:1c.4: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.484089] pci 0000:00:1c.4: calling pci_fixup_video+0x0/0xad
[ 0.484094] pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x145
[ 0.484097] pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.484106] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.484112] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30
[ 0.484114] pci 0000:00:1d.0: Performing full reset
[ 0.484130] pci 0000:00:1d.0: calling pci_fixup_video+0x0/0xad
[ 0.484135] pci 0000:00:1d.1: calling quirk_e100_interrupt+0x0/0x145
[ 0.484138] pci 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x22
[ 0.484141] pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.484145] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.484147] pci 0000:00:1d.1: Performing full reset
[ 0.484159] pci 0000:00:1d.1: calling pci_fixup_video+0x0/0xad
[ 0.484164] pci 0000:00:1d.2: calling quirk_e100_interrupt+0x0/0x145
[ 0.484167] pci 0000:00:1d.2: calling quirk_cardbus_legacy+0x0/0x22
[ 0.484170] pci 0000:00:1d.2: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.484174] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.484176] pci 0000:00:1d.2: Performing full reset
[ 0.484187] pci 0000:00:1d.2: calling pci_fixup_video+0x0/0xad
[ 0.484192] pci 0000:00:1d.7: calling quirk_e100_interrupt+0x0/0x145
[ 0.484195] pci 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x22
[ 0.484198] pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.484224] pci 0000:00:1d.7: EHCI: BIOS handoff
[ 0.500017] pci 0000:00:1d.7: calling pci_fixup_video+0x0/0xad
[ 0.500023] pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x145
[ 0.500027] pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.500031] pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.500034] pci 0000:00:1e.0: calling pci_fixup_video+0x0/0xad
[ 0.500039] pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x145
[ 0.500043] pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.500046] pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.500050] pci 0000:00:1f.0: calling pci_fixup_video+0x0/0xad
[ 0.500055] pci 0000:00:1f.2: calling quirk_e100_interrupt+0x0/0x145
[ 0.500059] pci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x22
[ 0.500062] pci 0000:00:1f.2: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.500066] pci 0000:00:1f.2: calling pci_fixup_video+0x0/0xad
[ 0.500071] pci 0000:00:1f.3: calling quirk_e100_interrupt+0x0/0x145
[ 0.500075] pci 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x22
[ 0.500078] pci 0000:00:1f.3: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.500081] pci 0000:00:1f.3: calling pci_fixup_video+0x0/0xad
[ 0.500087] pci 0000:00:1f.5: calling quirk_e100_interrupt+0x0/0x145
[ 0.500090] pci 0000:00:1f.5: calling quirk_cardbus_legacy+0x0/0x22
[ 0.500094] pci 0000:00:1f.5: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.500097] pci 0000:00:1f.5: calling pci_fixup_video+0x0/0xad
[ 0.500112] pci 0000:01:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd
[ 0.500129] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.500132] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.500135] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xad
[ 0.500138] pci 0000:01:00.0: Boot video device
[ 0.500143] pci 0000:03:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.500146] pci 0000:03:00.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.500149] pci 0000:03:00.0: calling pci_fixup_video+0x0/0xad
[ 0.500154] pci 0000:03:00.1: calling quirk_cardbus_legacy+0x0/0x22
[ 0.500157] pci 0000:03:00.1: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.500160] pci 0000:03:00.1: calling pci_fixup_video+0x0/0xad
[ 0.500166] pci 0000:04:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.500169] pci 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.500171] pci 0000:04:00.0: calling pci_fixup_video+0x0/0xad
[ 0.500177] pci 0000:05:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.500180] pci 0000:05:00.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.500183] pci 0000:05:00.0: calling pci_fixup_video+0x0/0xad
[ 0.500188] pci 0000:05:07.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.500190] pci 0000:05:07.0: calling quirk_usb_early_handoff+0x0/0x4e9
[ 0.500193] pci 0000:05:07.0: calling pci_fixup_video+0x0/0xad
[ 0.500197] PCI: CLS 4 bytes, default 64
[ 0.500253] Trying to unpack rootfs image as initramfs...
[ 0.742210] Freeing initrd memory: 10856k freed
[ 0.753267] DMA-API: preallocated 32768 debug entries
[ 0.753270] DMA-API: debugging enabled by kernel config
[ 0.753274] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.753277] Placing 64MB software IO TLB between ffff8800dbeda000 - ffff8800dfeda000
[ 0.753279] software IO TLB at phys 0xdbeda000 - 0xdfeda000
[ 0.755738] audit: initializing netlink socket (disabled)
[ 0.755757] type=2000 audit(1300544792.748:1): initialized
[ 0.756498] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.756914] VFS: Disk quotas dquot_6.5.2
[ 0.756965] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.757053] msgmni has been set to 7925
[ 0.757571] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.757575] io scheduler noop registered
[ 0.757577] io scheduler deadline registered
[ 0.757615] io scheduler cfq registered (default)
[ 0.757929] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.757959] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.758062] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.758096] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.758207] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.758241] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.758349] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.758383] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.759394] efifb: probing for efifb
[ 0.759764] efifb: framebuffer at 0xf9000000, mapped to 0xffffc90005100000, using 3072k, total 3072k
[ 0.759766] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.759768] efifb: scrolling: redraw
[ 0.759771] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.759870] fbcon: EFI VGA (fb0) is primary device
[ 0.781560] Console: switching to colour frame buffer device 128x48
[ 0.801580] fb0: EFI VGA frame buffer device
[ 0.801583] intel_idle: MWAIT substates: 0x20
[ 0.801585] intel_idle: does not run on family 6 model 23
[ 0.801710] ERST: Table is not found!
[ 0.847775] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.867643] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.128683] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.192649] Linux agpgart interface v0.103
[ 1.195769] brd: module loaded
[ 1.196147] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.196577] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.196633] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.197047] mousedev: PS/2 mouse device common for all mice
[ 1.197172] rtc_cmos 00:04: RTC can wake from S4
[ 1.214783] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.224069] rtc (null): alarm rollover: day
[ 1.224211] rtc_cmos: dev (254:0)
[ 1.224219] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.224243] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.224331] cpuidle: using governor ladder
[ 1.224333] cpuidle: using governor menu
[ 1.224643] TCP cubic registered
[ 1.224645] NET: Registered protocol family 17
[ 1.224650] Registering the dns_resolver key type
[ 1.225011] registered taskstats version 1
[ 1.225013] IMA: No TPM chip found, activating TPM-bypass!
[ 1.225393] rtc_cmos 00:04: setting system clock to 2011-03-19 14:26:33 UTC (1300544793)
[ 1.226911] Freeing unused kernel memory: 584k freed
[ 1.227026] Write protecting the kernel read-only data: 6144k
[ 1.230668] Freeing unused kernel memory: 872k freed
[ 1.232076] Freeing unused kernel memory: 292k freed
[ 1.249287] udev[1058]: starting version 164
[ 1.297002] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.297007] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 1.297069] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.297107] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.297111] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.297136] drivers/usb/core/inode.c: creating file 'devices'
[ 1.297141] drivers/usb/core/inode.c: creating file '001'
[ 1.297319] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.332085] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 1.332092] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
[ 1.332167] ehci_hcd 0000:00:1a.7: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
[ 1.336649] ehci_hcd 0000:00:1a.7: Enabling legacy PCI PM
[ 1.336672] ehci_hcd 0000:00:1a.7: cache line size of 4 is not supported
[ 1.336675] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 1.336699] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
[ 1.336707] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.340604] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.352038] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.352072] usb usb1: default language 0x0409
[ 1.352080] usb usb1: udev 1, busnum 1, minor = 0
[ 1.352082] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.352085] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.352088] usb usb1: Product: EHCI Host Controller
[ 1.352089] usb usb1: Manufacturer: Linux 2.6.38-git3 ehci_hcd
[ 1.352091] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.352236] usb usb1: usb_probe_device
[ 1.352239] usb usb1: configuration #1 chosen from 1 choice
[ 1.352247] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.352270] hub 1-0:1.0: usb_probe_interface
[ 1.352272] hub 1-0:1.0: usb_probe_interface - got id
[ 1.352274] hub 1-0:1.0: USB hub found
[ 1.352279] hub 1-0:1.0: 6 ports detected
[ 1.352281] hub 1-0:1.0: standalone hub
[ 1.352283] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.352285] hub 1-0:1.0: individual port over-current protection
[ 1.352287] hub 1-0:1.0: power on to power good time: 20ms
[ 1.352292] hub 1-0:1.0: local power source is good
[ 1.352294] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1.352357] drivers/usb/core/inode.c: creating file '001'
[ 1.352428] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.352457] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.352461] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.352467] drivers/usb/core/inode.c: creating file '002'
[ 1.352531] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.360791] Floppy drive(s): fd0 is 1.44M
[ 1.362326] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.364524] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.364548] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.364559] r8169 0000:04:00.0: enabling Mem-Wr-Inval
[ 1.364604] r8169 0000:04:00.0: setting latency timer to 64
[ 1.364658] r8169 0000:04:00.0: irq 44 for MSI/MSI-X
[ 1.364923] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xffffc9000066c000, 00:1f:d0:9a:d6:63, XID 1c4000c0 IRQ 44
[ 1.364956] Uniform Multi-Platform E-IDE driver
[ 1.365684] jmicron 0000:03:00.1: IDE controller (0x197b:0x2363 rev 0x02)
[ 1.365696] JMicron IDE 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.365704] JMicron IDE 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.365723] jmicron 0000:03:00.1: 100% native mode on irq 16
[ 1.365731] JMicron IDE 0000:03:00.1: enabling bus mastering
[ 1.365737] JMicron IDE 0000:03:00.1: setting latency timer to 64
[ 1.365742] ide0: BM-DMA at 0xeb00-0xeb07
[ 1.365764] ide1: BM-DMA at 0xeb08-0xeb0f
[ 1.365780] Probing IDE interface ide0...
[ 1.372070] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 1.372075] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
[ 1.372135] ehci_hcd 0000:00:1d.7: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
[ 1.380039] ehci_hcd 0000:00:1d.7: Enabling legacy PCI PM
[ 1.380048] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.380078] ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported
[ 1.380080] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 1.380085] r8169 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.380092] r8169 0000:05:00.0: enabling Mem-Wr-Inval
[ 1.380108] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
[ 1.380116] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.380127] r8169 0000:05:00.0: (unregistered net_device): no PCI Express capability
[ 1.380392] r8169 0000:05:00.0: eth1: RTL8169sb/8110sb at 0xffffc9000065e000, 00:1f:1f:07:b0:bf, XID 10000000 IRQ 20
[ 1.381729] SCSI subsystem initialized
[ 1.383754] FDC 0 is a post-1991 82077
[ 1.383991] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.396022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.396059] usb usb2: default language 0x0409
[ 1.396067] usb usb2: udev 1, busnum 2, minor = 128
[ 1.396070] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.396072] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.396074] usb usb2: Product: EHCI Host Controller
[ 1.396076] usb usb2: Manufacturer: Linux 2.6.38-git3 ehci_hcd
[ 1.396078] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.396218] usb usb2: usb_probe_device
[ 1.396221] usb usb2: configuration #1 chosen from 1 choice
[ 1.396229] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 1.396251] hub 2-0:1.0: usb_probe_interface
[ 1.396253] hub 2-0:1.0: usb_probe_interface - got id
[ 1.396256] hub 2-0:1.0: USB hub found
[ 1.396261] hub 2-0:1.0: 6 ports detected
[ 1.396263] hub 2-0:1.0: standalone hub
[ 1.396265] hub 2-0:1.0: no power switching (usb 1.0)
[ 1.396267] hub 2-0:1.0: individual port over-current protection
[ 1.396269] hub 2-0:1.0: power on to power good time: 20ms
[ 1.396274] hub 2-0:1.0: local power source is good
[ 1.396276] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 1.396331] drivers/usb/core/inode.c: creating file '001'
[ 1.399595] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.399607] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.399611] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.399619] drivers/usb/core/inode.c: creating file '003'
[ 1.399742] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.400886] libata version 3.00 loaded.
[ 1.428027] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.428034] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.428037] uhci_hcd 0000:00:1a.0: Performing full reset
[ 1.428073] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 1.428161] usb usb3: default language 0x0409
[ 1.428168] usb usb3: udev 1, busnum 3, minor = 256
[ 1.428170] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.428173] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.428175] usb usb3: Product: UHCI Host Controller
[ 1.428177] usb usb3: Manufacturer: Linux 2.6.38-git3 uhci_hcd
[ 1.428179] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.428321] usb usb3: usb_probe_device
[ 1.428324] usb usb3: configuration #1 chosen from 1 choice
[ 1.428332] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 1.428354] hub 3-0:1.0: usb_probe_interface
[ 1.428356] hub 3-0:1.0: usb_probe_interface - got id
[ 1.428359] hub 3-0:1.0: USB hub found
[ 1.428364] hub 3-0:1.0: 2 ports detected
[ 1.428366] hub 3-0:1.0: standalone hub
[ 1.428368] hub 3-0:1.0: no power switching (usb 1.0)
[ 1.428369] hub 3-0:1.0: individual port over-current protection
[ 1.428372] hub 3-0:1.0: power on to power good time: 2ms
[ 1.428377] hub 3-0:1.0: local power source is good
[ 1.428379] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 1.428424] drivers/usb/core/inode.c: creating file '001'
[ 1.428455] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
[ 1.428498] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.428506] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.428509] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.428516] drivers/usb/core/inode.c: creating file '004'
[ 1.428571] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.444024] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.444030] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.444033] uhci_hcd 0000:00:1a.1: Performing full reset
[ 1.444063] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 1.444139] usb usb4: default language 0x0409
[ 1.444146] usb usb4: udev 1, busnum 4, minor = 384
[ 1.444148] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.444151] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.444153] usb usb4: Product: UHCI Host Controller
[ 1.444155] usb usb4: Manufacturer: Linux 2.6.38-git3 uhci_hcd
[ 1.444156] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.444274] usb usb4: usb_probe_device
[ 1.444277] usb usb4: configuration #1 chosen from 1 choice
[ 1.444285] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 1.444308] hub 4-0:1.0: usb_probe_interface
[ 1.444310] hub 4-0:1.0: usb_probe_interface - got id
[ 1.444313] hub 4-0:1.0: USB hub found
[ 1.444318] hub 4-0:1.0: 2 ports detected
[ 1.444320] hub 4-0:1.0: standalone hub
[ 1.444321] hub 4-0:1.0: no power switching (usb 1.0)
[ 1.444323] hub 4-0:1.0: individual port over-current protection
[ 1.444325] hub 4-0:1.0: power on to power good time: 2ms
[ 1.444330] hub 4-0:1.0: local power source is good
[ 1.444332] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 1.444375] drivers/usb/core/inode.c: creating file '001'
[ 1.444406] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
[ 1.444438] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.444445] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.444448] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.444453] drivers/usb/core/inode.c: creating file '005'
[ 1.444508] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.452061] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1.456032] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 1.456036] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.456039] uhci_hcd 0000:00:1a.2: Performing full reset
[ 1.456057] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[ 1.456130] usb usb5: default language 0x0409
[ 1.456137] usb usb5: udev 1, busnum 5, minor = 512
[ 1.456139] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.456141] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.456143] usb usb5: Product: UHCI Host Controller
[ 1.456145] usb usb5: Manufacturer: Linux 2.6.38-git3 uhci_hcd
[ 1.456147] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.456227] usb usb5: usb_probe_device
[ 1.456230] usb usb5: configuration #1 chosen from 1 choice
[ 1.456236] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 1.456260] hub 5-0:1.0: usb_probe_interface
[ 1.456262] hub 5-0:1.0: usb_probe_interface - got id
[ 1.456264] hub 5-0:1.0: USB hub found
[ 1.456269] hub 5-0:1.0: 2 ports detected
[ 1.456270] hub 5-0:1.0: standalone hub
[ 1.456272] hub 5-0:1.0: no power switching (usb 1.0)
[ 1.456274] hub 5-0:1.0: individual port over-current protection
[ 1.456276] hub 5-0:1.0: power on to power good time: 2ms
[ 1.456281] hub 5-0:1.0: local power source is good
[ 1.456283] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 1.456323] drivers/usb/core/inode.c: creating file '001'
[ 1.456351] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2
[ 1.456379] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.456385] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.456388] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.456393] drivers/usb/core/inode.c: creating file '006'
[ 1.456441] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.480019] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.480023] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.480026] uhci_hcd 0000:00:1d.0: Performing full reset
[ 1.480043] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[ 1.480106] usb usb6: default language 0x0409
[ 1.480114] usb usb6: udev 1, busnum 6, minor = 640
[ 1.480116] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.480119] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.480121] usb usb6: Product: UHCI Host Controller
[ 1.480123] usb usb6: Manufacturer: Linux 2.6.38-git3 uhci_hcd
[ 1.480124] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.480210] usb usb6: usb_probe_device
[ 1.480213] usb usb6: configuration #1 chosen from 1 choice
[ 1.480219] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 1.480243] hub 6-0:1.0: usb_probe_interface
[ 1.480246] hub 6-0:1.0: usb_probe_interface - got id
[ 1.480248] hub 6-0:1.0: USB hub found
[ 1.480253] hub 6-0:1.0: 2 ports detected
[ 1.480255] hub 6-0:1.0: standalone hub
[ 1.480257] hub 6-0:1.0: no power switching (usb 1.0)
[ 1.480259] hub 6-0:1.0: individual port over-current protection
[ 1.480261] hub 6-0:1.0: power on to power good time: 2ms
[ 1.480265] hub 6-0:1.0: local power source is good
[ 1.480268] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 1.480306] drivers/usb/core/inode.c: creating file '001'
[ 1.480341] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[ 1.480362] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.480368] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.480371] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.480377] drivers/usb/core/inode.c: creating file '007'
[ 1.480423] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.496041] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1.500029] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.500034] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.500037] uhci_hcd 0000:00:1d.1: Performing full reset
[ 1.500067] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[ 1.500143] usb usb7: default language 0x0409
[ 1.500150] usb usb7: udev 1, busnum 7, minor = 768
[ 1.500153] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.500155] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.500157] usb usb7: Product: UHCI Host Controller
[ 1.500159] usb usb7: Manufacturer: Linux 2.6.38-git3 uhci_hcd
[ 1.500161] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.500275] usb usb7: usb_probe_device
[ 1.500277] usb usb7: configuration #1 chosen from 1 choice
[ 1.500284] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 1.500306] hub 7-0:1.0: usb_probe_interface
[ 1.500308] hub 7-0:1.0: usb_probe_interface - got id
[ 1.500311] hub 7-0:1.0: USB hub found
[ 1.500315] hub 7-0:1.0: 2 ports detected
[ 1.500317] hub 7-0:1.0: standalone hub
[ 1.500319] hub 7-0:1.0: no power switching (usb 1.0)
[ 1.500321] hub 7-0:1.0: individual port over-current protection
[ 1.500323] hub 7-0:1.0: power on to power good time: 2ms
[ 1.500327] hub 7-0:1.0: local power source is good
[ 1.500330] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 1.500372] drivers/usb/core/inode.c: creating file '001'
[ 1.500408] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[ 1.500432] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.500438] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.500441] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.500446] drivers/usb/core/inode.c: creating file '008'
[ 1.500498] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.516023] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.516028] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.516030] uhci_hcd 0000:00:1d.2: Performing full reset
[ 1.516050] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[ 1.516127] usb usb8: default language 0x0409
[ 1.516134] usb usb8: udev 1, busnum 8, minor = 896
[ 1.516136] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.516138] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.516141] usb usb8: Product: UHCI Host Controller
[ 1.516142] usb usb8: Manufacturer: Linux 2.6.38-git3 uhci_hcd
[ 1.516144] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.516226] usb usb8: usb_probe_device
[ 1.516228] usb usb8: configuration #1 chosen from 1 choice
[ 1.516235] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 1.516258] hub 8-0:1.0: usb_probe_interface
[ 1.516260] hub 8-0:1.0: usb_probe_interface - got id
[ 1.516263] hub 8-0:1.0: USB hub found
[ 1.516267] hub 8-0:1.0: 2 ports detected
[ 1.516269] hub 8-0:1.0: standalone hub
[ 1.516270] hub 8-0:1.0: no power switching (usb 1.0)
[ 1.516272] hub 8-0:1.0: individual port over-current protection
[ 1.516274] hub 8-0:1.0: power on to power good time: 2ms
[ 1.516279] hub 8-0:1.0: local power source is good
[ 1.516281] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 1.516323] drivers/usb/core/inode.c: creating file '001'
[ 1.516356] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[ 1.528048] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.544031] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.556029] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.580044] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.604049] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.616056] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.752013] Refined TSC clocksource calibration: 2333.067 MHz.
[ 1.752018] Switching to clocksource tsc
[ 1.944009] ------------[ cut here ]------------
[ 1.944016] WARNING: at kernel/irq/manage.c:412 __enable_irq+0x59/0x88()
[ 1.944018] Hardware name: EP45-UD3
[ 1.944020] Unbalanced enable for IRQ 16
[ 1.944022] Modules linked in: ahci(+) libahci libata ide_pci_generic(+) scsi_mod jmicron(+) r8169 uhci_hcd floppy mii ide_core ehci_hcd
[ 1.944036] Pid: 1116, comm: modprobe Not tainted 2.6.38-git3 #1
[ 1.944038] Call Trace:
[ 1.944043] [<ffffffff8103f364>] ? warn_slowpath_common+0x80/0x98
[ 1.944048] [<ffffffff8103f410>] ? warn_slowpath_fmt+0x41/0x43
[ 1.944053] [<ffffffff8108ce03>] ? __enable_irq+0x59/0x88
[ 1.944057] [<ffffffff8108d35c>] ? enable_irq+0x57/0x70
[ 1.944068] [<ffffffffa00c8a14>] ? ide_probe_port+0x580/0x59f [ide_core]
[ 1.944078] [<ffffffffa00c8d7e>] ? ide_host_register+0x2ad/0x64c [ide_core]
[ 1.944088] [<ffffffffa00cd882>] ? ide_pci_init_two+0x58d/0x666 [ide_core]
[ 1.944101] [<ffffffff8119f2ee>] ? ida_get_new_above+0xfa/0x1b5
[ 1.944106] [<ffffffff81035619>] ? get_parent_ip+0x11/0x41
[ 1.944110] [<ffffffff81037b68>] ? sub_preempt_count+0x92/0xa6
[ 1.944114] [<ffffffff81035619>] ? get_parent_ip+0x11/0x41
[ 1.944117] [<ffffffff81035619>] ? get_parent_ip+0x11/0x41
[ 1.944126] [<ffffffffa00cd96c>] ? ide_pci_init_one+0x11/0x13 [ide_core]
[ 1.944131] [<ffffffffa00170ec>] ? jmicron_init_one+0x12/0x14 [jmicron]
[ 1.944136] [<ffffffff811c12fe>] ? local_pci_probe+0x48/0x91
[ 1.944139] [<ffffffff811c20e0>] ? pci_device_probe+0xc5/0xf5
[ 1.944144] [<ffffffff812476dd>] ? driver_sysfs_add+0x6b/0x90
[ 1.944148] [<ffffffff812478d3>] ? driver_probe_device+0x120/0x1fb
[ 1.944151] [<ffffffff81247a06>] ? __driver_attach+0x58/0x7c
[ 1.944155] [<ffffffff812479ae>] ? __driver_attach+0x0/0x7c
[ 1.944158] [<ffffffff81246dc5>] ? bus_for_each_dev+0x4e/0x83
[ 1.944162] [<ffffffff81247636>] ? driver_attach+0x19/0x1b
[ 1.944165] [<ffffffff8124729f>] ? bus_add_driver+0xce/0x21b
[ 1.944169] [<ffffffff81247f95>] ? driver_register+0x99/0x10a
[ 1.944173] [<ffffffff811c233e>] ? __pci_register_driver+0x53/0xc3
[ 1.944177] [<ffffffffa001a000>] ? jmicron_ide_init+0x0/0x20 [jmicron]
[ 1.944182] [<ffffffffa001a01e>] ? jmicron_ide_init+0x1e/0x20 [jmicron]
[ 1.944186] [<ffffffff81000210>] ? do_one_initcall+0x7a/0x134
[ 1.944191] [<ffffffff8107128d>] ? sys_init_module+0x9c/0x1db
[ 1.944195] [<ffffffff8131d852>] ? system_call_fastpath+0x16/0x1b
[ 1.944199] ---[ end trace 05a95fe67ed8fdd9 ]---
[ 1.944240] Probing IDE interface ide1...
[ 2.512057] ide0 at 0xef00-0xef07,0xee02 on irq 16
[ 2.512117] ide1 at 0xed00-0xed07,0xec02 on irq 16
[ 2.512190] ahci 0000:03:00.0: version 3.0
[ 2.512208] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.528035] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.528039] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.528045] ahci 0000:03:00.0: setting latency timer to 64
[ 2.528386] scsi0 : ahci
[ 2.528523] scsi1 : ahci
[ 2.528630] ata1: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 19
[ 2.528634] ata2: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 19
[ 2.592106] ata_piix 0000:00:1f.2: version 2.13
[ 2.592118] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.592123] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.592167] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.592477] scsi2 : ata_piix
[ 2.592574] scsi3 : ata_piix
[ 2.593113] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 2.593118] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 2.593148] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.593152] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.593192] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.593434] scsi4 : ata_piix
[ 2.593526] scsi5 : ata_piix
[ 2.593925] ata5: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf200 irq 19
[ 2.593929] ata6: SATA max UDMA/133 cmd 0xf400 ctl 0xf300 bmdma 0xf208 irq 19
[ 2.632012] usb usb3: suspend_rh (auto-stop)
[ 2.632032] usb usb4: suspend_rh (auto-stop)
[ 2.632050] usb usb5: suspend_rh (auto-stop)
[ 2.632068] usb usb6: suspend_rh (auto-stop)
[ 2.632086] usb usb7: suspend_rh (auto-stop)
[ 2.632115] usb usb8: suspend_rh (auto-stop)
[ 2.848026] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.848066] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.922609] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.933217] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.388056] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.388069] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 3.388079] ata4.01: link offline, clearing class 3 to NONE
[ 3.396072] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.396088] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 3.396184] ata4.00: ATAPI: ATAPI iHAS222 8, 4L01, max UDMA/100
[ 3.404372] ata3.00: HPA detected: current 1953523055, native 1953525168
[ 3.404379] ata3.00: ATA-8: WDC WD1002FBYS-01A6B0, 03.00C05, max UDMA/133
[ 3.404382] ata3.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.412141] ata4.00: configured for UDMA/100
[ 3.420395] ata3.00: configured for UDMA/133
[ 3.420516] scsi 2:0:0:0: Direct-Access ATA WDC WD1002FBYS-0 03.0 PQ: 0 ANSI: 5
[ 3.421926] scsi 3:0:0:0: CD-ROM ATAPI iHAS222 8 4L01 PQ: 0 ANSI: 5
[ 3.433146] sd 2:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.433216] sd 2:0:0:0: [sda] Write Protect is off
[ 3.433219] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.433247] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.436542] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.436546] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.436727] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.471500] sda: sda1 sda2 sda3
[ 3.471802] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.476847] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.477041] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 3.840497] PM: Starting manual resume from disk
[ 3.880680] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[ 3.880683] EXT4-fs (sda2): write access will be enabled during recovery
[ 4.140377] EXT4-fs (sda2): recovery complete
[ 4.140809] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.812599] udev[1363]: starting version 164
[ 6.133532] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 6.133541] ACPI: Power Button [PWRB]
[ 6.133660] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 6.133666] ACPI: Power Button [PWRF]
[ 6.201150] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 6.234390] parport_pc 00:09: reported by Plug and Play ACPI
[ 6.234433] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 6.356230] ACPI: acpi_idle registered with cpuidle
[ 6.517295] i2c-core: driver [dummy] registered
[ 6.703914] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.703924] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.703993] i2c i2c-0: adapter [SMBus I801 adapter at 0500] registered
[ 6.979893] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 7.136588] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.136668] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 7.136694] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.136698] ALSA sound/pci/hda/hda_intel.c:2535: chipset global capabilities = 0x4401
[ 7.168011] ALSA sound/pci/hda/hda_intel.c:913: codec_mask = 0x4
[ 7.168116] ALSA sound/pci/hda/hda_intel.c:1353: codec #2 probed OK
[ 7.402822] ALSA sound/pci/hda/hda_codec.c:3726: hda_codec: model '6stack-dig' is selected for config 1458:a002 (Gigabyte P35 DS3R)
[ 7.402832] ALSA sound/pci/hda/patch_realtek.c:1527: SKU: Nid=0x1d sku_cfg=0x4005e601
[ 7.402836] ALSA sound/pci/hda/patch_realtek.c:1529: SKU: port_connectivity=0x1
[ 7.402840] ALSA sound/pci/hda/patch_realtek.c:1530: SKU: enable_pcbeep=0x0
[ 7.402845] ALSA sound/pci/hda/patch_realtek.c:1531: SKU: check_sum=0x00000005
[ 7.402848] ALSA sound/pci/hda/patch_realtek.c:1532: SKU: customization=0x000000e6
[ 7.402850] ALSA sound/pci/hda/patch_realtek.c:1533: SKU: external_amp=0x0
[ 7.402854] ALSA sound/pci/hda/patch_realtek.c:1534: SKU: platform_type=0x0
[ 7.402858] ALSA sound/pci/hda/patch_realtek.c:1535: SKU: swap=0x0
[ 7.402861] ALSA sound/pci/hda/patch_realtek.c:1536: SKU: override=0x1
[ 7.405344] ALSA sound/pci/hda/hda_codec.c:2164: Cannot find slave Headphone Playback Volume, skipped
[ 7.405348] ALSA sound/pci/hda/hda_codec.c:2164: Cannot find slave Speaker Playback Volume, skipped
[ 7.405351] ALSA sound/pci/hda/hda_codec.c:2164: Cannot find slave Mono Playback Volume, skipped
[ 7.405354] ALSA sound/pci/hda/hda_codec.c:2164: Cannot find slave Line-Out Playback Volume, skipped
[ 7.405357] ALSA sound/pci/hda/hda_codec.c:2164: Cannot find slave PCM Playback Volume, skipped
[ 7.405369] ALSA sound/pci/hda/hda_codec.c:2164: Cannot find slave Speaker Playback Switch, skipped
[ 7.405372] ALSA sound/pci/hda/hda_codec.c:2164: Cannot find slave Mono Playback Switch, skipped
[ 7.405377] ALSA sound/pci/hda/hda_codec.c:2164: Cannot find slave Line-Out Playback Switch, skipped
[ 7.405380] ALSA sound/pci/hda/hda_codec.c:2164: Cannot find slave PCM Playback Switch, skipped
[ 7.620996] nvidia: module license 'NVIDIA' taints kernel.
[ 7.621000] Disabling lock debugging due to kernel taint
[ 8.543170] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.543179] nvidia 0000:01:00.0: setting latency timer to 64
[ 8.543184] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.543325] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.30 Fri Feb 25 14:34:55 PST 2011
[ 9.067233] Adding 9462280k swap on /dev/sda3. Priority:-1 extents:1 across:9462280k
[ 9.071548] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 9.226317] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 9.326800] loop: module loaded
[ 9.348058] it87: Found IT8718F chip at 0x290, revision 5
[ 9.348066] it87: VID is disabled (pins used for GPIO)
[ 9.348076] it87: Beeping is supported
[ 9.855628] EXT3-fs: barriers not enabled
[ 9.855857] kjournald starting. Commit interval 5 seconds
[ 9.856103] EXT3-fs (sda1): using internal journal
[ 9.856107] EXT3-fs (sda1): mounted filesystem with writeback data mode
[ 10.985868] fuse init (API version 7.16)
[ 11.038643] r8169 0000:05:00.0: eth1: link down
[ 11.504582] r8169 0000:04:00.0: eth0: link down
[ 11.504588] r8169 0000:04:00.0: eth0: link down
[ 12.578129] lp0: using parport0 (interrupt-driven).
[ 12.578132] lp0: console ready
[ 12.584120] ppdev: user-space parallel port driver
[ 12.715114] r8169 0000:05:00.0: eth1: link up
[ 13.537770] r8169 0000:04:00.0: eth0: link up
[ 15.829179] Bluetooth: Core ver 2.15
[ 15.829242] NET: Registered protocol family 31
[ 15.829245] Bluetooth: HCI device and connection manager initialized
[ 15.829250] Bluetooth: HCI socket layer initialized
[ 15.980045] Bluetooth: L2CAP ver 2.15
[ 15.980047] Bluetooth: L2CAP socket layer initialized
[ 16.006369] Bluetooth: RFCOMM TTY layer initialized
[ 16.006375] Bluetooth: RFCOMM socket layer initialized
[ 16.006377] Bluetooth: RFCOMM ver 1.11
[ 16.614037] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.614040] Bluetooth: BNEP filters: protocol multicast
[ 16.730849] Bluetooth: SCO (Voice Link) ver 0.6
[ 16.730851] Bluetooth: SCO socket layer initialized
[ 51.179113] sshd (3149): /proc/3149/oom_adj is deprecated, please use /proc/3149/oom_score_adj instead.
prev parent reply other threads:[~2011-03-19 14:42 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-19 12:41 No networking since git3 Piotr Hosowicz
2011-03-19 12:56 ` Anca Emanuel
2011-03-19 13:04 ` Piotr Hosowicz
2011-03-19 14:08 ` Anca Emanuel
2011-03-19 15:18 ` Eric Dumazet
2011-03-19 15:31 ` Oliver Neukum
2011-03-19 15:33 ` Eric Dumazet
2011-03-19 15:39 ` [PATCH] r8169: fix a bug in rtl8169_init_phy() Eric Dumazet
2011-03-19 15:41 ` Oliver Neukum
2011-03-19 15:44 ` Eric Dumazet
2011-03-19 15:52 ` Piotr Hosowicz
2011-03-19 19:41 ` Francois Romieu
2011-03-19 15:49 ` Piotr Hosowicz
2011-03-19 16:04 ` Eric Dumazet
2011-03-19 16:27 ` Piotr Hosowicz
2011-03-19 16:38 ` Anca Emanuel
2011-03-19 16:41 ` Eric Dumazet
2011-03-19 17:03 ` Piotr Hosowicz
2011-03-19 16:03 ` Piotr Hosowicz
2011-03-19 17:20 ` Anca Emanuel
2011-03-19 18:59 ` Piotr Hosowicz
2011-03-19 20:38 ` David Miller
2011-03-19 14:35 ` Piotr Hosowicz [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D84BF1D.2010407@example.com \
--to=piotr@hosowicz.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.