From: BERTRAND Joel <joel.bertrand@systella.fr>
To: sparclinux@vger.kernel.org
Subject: Issuing Reset from mpt_config!!
Date: Sat, 19 Mar 2011 22:27:23 +0000 [thread overview]
Message-ID: <4D852DCB.50104@systella.fr> (raw)
Hello,
I have upgraded this saturday two Fire T1000 from 2.6.30.9 to 2.6.38
linux kernel to have better performances with ietd. I don't see any
hardware differences between both servers (same firmware) but one of
them doesn't boot 2.6.38 kernel:
...
Fusion MPT base driver 3.04.18
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SAS Host driver 3.04.18
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1064 A3: Capabilities={Initiator}
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x24000000
mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x2, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x24000000
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x2, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x24000000
mptbase: ioc0: Initiating recovery
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x24000000
mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x1, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x24000000
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x1, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x24000000
mptbase: ioc0: Initiating recovery
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x24000000
mptbase: ioc0: Attempting Retry Config request type 0x0, page 0x2, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x24000000
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x0, page 0x2, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x24000000
mptbase: ioc0: Initiating recovery
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x24000000
mptbase: ioc0: Attempting Retry Config request type 0x9, page 0x0, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x24000000
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x9, page 0x0, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x24000000
mptbase: ioc0: Initiating recovery
scsi0 : ioc0: LSISAS1064 A3, FwRev\x010a0000h, Ports=1, MaxQQ1, IRQ'
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x24000000
mptbase: ioc0: Attempting Retry Config request type 0x10, page 0x0, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x24000000
mptbase: ioc0: Initiating recovery
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x2c000000
mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x2, action 0
mptbase: ioc0: Attempting Retry Config request type 0x10, page 0x0, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x24000000
mptbase: ioc0: Initiating recovery
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x2c000000
mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x2, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x24000000
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x2c000001
mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x2, action 0
mptbase: ioc0: Attempting Retry Config request type 0x11, page 0x0, action 0
...
mptbase: ioc0: Initiating recovery
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!,
doorbell=0x2c000000
mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x2, action 0
Fusion MPT misc device (ioctl) driver 3.04.18
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor\x10,220)
mousedev: PS/2 mouse device common for all mice
rtc-sun4v rtc-sun4v: rtc core: registered sun4v as rtc0
md: raid1 personality registered for level 1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered protocol family 17
Registering the dns_resolver key type
rtc-sun4v rtc-sun4v: setting system clock to 2011-03-19 22:17:18 UTC
(1300573038)
md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
md: Unknown device name: sda4
VFS: Cannot open root device "md0" or unknown-block(0,0)
Please append a correct "root=" boot option; here are the available
partitions:
Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
Call Trace:
[00000000008aae24] mount_block_root+0x29c/0x2b8
[00000000008ab02c] prepare_namespace+0x184/0x1c8
[00000000008aa390] kernel_init+0x204/0x21c
[000000000042b00c] kernel_thread+0x30/0x48
[000000000074d35c] rest_init+0x18/0x7c
Press Stop-A (L1-A) to return to the boot prom
If I try to reboot with 2.6.30.9 kernel, the same server boots fine
(but hangs later due to another soft raid trouble) wihtout any trouble
during MPT initialization. I have built kernel in the first T1000 and
copied this kernel on the second one.
Both servers boot Solaris without trouble.
I have found some informations about this trouble but no one is sparc
specific and I have no idea to fix it. Any idea ?
Best regards,
JB
next reply other threads:[~2011-03-19 22:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-19 22:27 BERTRAND Joel [this message]
-- strict thread matches above, loose matches on Subject: below --
2011-03-22 11:42 Issuing Reset from mpt_config!! bertrand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D852DCB.50104@systella.fr \
--to=joel.bertrand@systella.fr \
--cc=sparclinux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.