From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.chez-thomas.org (hermes.mlbassoc.com [64.234.241.98]) by mx1.pokylinux.org (Postfix) with ESMTP id 7436B4C80A7E for ; Mon, 21 Mar 2011 11:35:56 -0500 (CDT) Received: by mail.chez-thomas.org (Postfix, from userid 999) id 34BE91660234; Mon, 21 Mar 2011 10:35:56 -0600 (MDT) X-Spam-Checker-Version: SpamAssassin 3.3.2-r929478 (2010-03-31) on hermes.chez-thomas.org X-Spam-Level: X-Spam-Status: No, score=-2.9 required=4.0 tests=ALL_TRUSTED,BAYES_00 autolearn=unavailable version=3.3.2-r929478 Received: from [127.0.0.1] (localhost.localdomain [127.0.0.1]) by mail.chez-thomas.org (Postfix) with ESMTP id 2A1E016601E7; Mon, 21 Mar 2011 10:35:55 -0600 (MDT) Message-ID: <4D877E6B.9000007@mlbassoc.com> Date: Mon, 21 Mar 2011 10:35:55 -0600 From: Gary Thomas User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2.13) Gecko/20101209 Fedora/3.1.7-0.35.b3pre.fc13 Thunderbird/3.1.7 MIME-Version: 1.0 To: Richard Purdie References: <4D876DD3.5070106@mlbassoc.com> <1300722848.30423.3751.camel@rex> In-Reply-To: <1300722848.30423.3751.camel@rex> Cc: Poky Subject: Re: Using RPM with Poky X-BeenThere: poky@yoctoproject.org X-Mailman-Version: 2.1.13 Precedence: list List-Id: Poky build system developer discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Mar 2011 16:35:56 -0000 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit On 03/21/2011 09:54 AM, Richard Purdie wrote: > On Mon, 2011-03-21 at 09:25 -0600, Gary Thomas wrote: >> I'm trying to do some testing with Poky on an atom-PC. I thought >> I'd try with a minimal system and then add pieces I need. Sadly, >> I've run aground doing this. I've built a couple of images with >> varying results: >> poky-image-minimal-live - boots on my box >> poky-image-sato-live - boots, but fails to find X display, then hangs (*) >> >> There seem to be no RPM tools on the minimal image. Did I miss something? >> On my old, ipk based system, I'd build up a minimal image then use opkg >> to install additional packages. > > Minimal images were never meant to ship with the package manager and now > don't. You can obviously change the image definitions easily enough as > needed. > >> How do I do that with the RPM based images? > > The same switch turns on/off the package manager data for rpm and opkg. I tried adding this to local.conf, but nothing changed when I build minimal image: IMAGE_FEATURES += " package-management ssh-server-dropbear " BTW, where is this documented? Not in the Poky handbook from what I can tell. Also, is there documentation on how to use zypper, how to set up repositories, etc? > >> I've checked the documentation and there's basically nothing >> about this, unless I looked in the wrong place. >> >> Any ideas or pointers gladly accepted. Thanks >> >> (*) I had success with this in the past when I booted with MACHINE=emenlow >> but that hardware isn't in the primary list. > > I'm not sure why this isn't working or what the problem might be... It complains it can't find /dev/fb0. See the boot log at http://www.mlbassoc.com/poky/boot_2011-03-21.log > > You didn't mention which branch this is with btw. master aeaa356a5ee77b4596c479451a9db289381a4d16 Thanks again -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------