From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga02.intel.com (mga02.intel.com [134.134.136.20]) by mx1.pokylinux.org (Postfix) with ESMTP id 2E2C34C80050 for ; Mon, 21 Mar 2011 15:47:50 -0500 (CDT) Received: from orsmga002.jf.intel.com ([10.7.209.21]) by orsmga101.jf.intel.com with ESMTP; 21 Mar 2011 13:47:49 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.63,221,1299484800"; d="scan'208";a="615836019" Received: from doubt.jf.intel.com (HELO [10.7.199.86]) ([10.7.199.86]) by orsmga002.jf.intel.com with ESMTP; 21 Mar 2011 13:47:49 -0700 Message-ID: <4D87B974.1040704@linux.intel.com> Date: Mon, 21 Mar 2011 13:47:48 -0700 From: Darren Hart User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.14) Gecko/20110223 Lightning/1.0b2 Thunderbird/3.1.8 MIME-Version: 1.0 To: Gary Thomas References: <4D876DD3.5070106@mlbassoc.com> <1300722848.30423.3751.camel@rex> <4D877E6B.9000007@mlbassoc.com> <1300730269.30423.3975.camel@rex> <4D879643.7000908@mlbassoc.com> In-Reply-To: <4D879643.7000908@mlbassoc.com> Cc: Poky Subject: Re: Using RPM with Poky X-BeenThere: poky@yoctoproject.org X-Mailman-Version: 2.1.13 Precedence: list List-Id: Poky build system developer discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Mar 2011 20:47:50 -0000 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit On 03/21/2011 11:17 AM, Gary Thomas wrote: > On 03/21/2011 11:57 AM, Richard Purdie wrote: >> On Mon, 2011-03-21 at 10:35 -0600, Gary Thomas wrote: >>> On 03/21/2011 09:54 AM, Richard Purdie wrote: >>>> On Mon, 2011-03-21 at 09:25 -0600, Gary Thomas wrote: >>>>> I'm trying to do some testing with Poky on an atom-PC. I thought >>>>> I'd try with a minimal system and then add pieces I need. Sadly, >>>>> I've run aground doing this. I've built a couple of images with >>>>> varying results: >>>>> poky-image-minimal-live - boots on my box >>>>> poky-image-sato-live - boots, but fails to find X display, then >>>>> hangs (*) >>>>> >>>>> There seem to be no RPM tools on the minimal image. Did I miss >>>>> something? >>>>> On my old, ipk based system, I'd build up a minimal image then use >>>>> opkg >>>>> to install additional packages. >>>> >>>> Minimal images were never meant to ship with the package manager and >>>> now >>>> don't. You can obviously change the image definitions easily enough as >>>> needed. >>>> >>>>> How do I do that with the RPM based images? >>>> >>>> The same switch turns on/off the package manager data for rpm and opkg. >>> >>> I tried adding this to local.conf, but nothing changed when I build >>> minimal image: >>> IMAGE_FEATURES += " package-management ssh-server-dropbear " >> >> There is also this: >> >> # remove not needed ipkg informations >> ROOTFS_POSTPROCESS_COMMAND += "remove_packaging_data_files ; " >> >> in poky-image-minimal.bbclass which has been there for a long time and >> removes the package manager data files. > > I guess I'm just used to my own minimal image which does have all these > present. > >> >>> BTW, where is this documented? Not in the Poky handbook from what I >>> can tell. >>> >>> Also, is there documentation on how to use zypper, how to set up >>> repositories, etc? >> >> I think others have helped here. Please do send patches for the manual >> when people go to the trouble of finding information to help though! > > I'll see what I can do to help with this. > >>>>> I've checked the documentation and there's basically nothing >>>>> about this, unless I looked in the wrong place. >>>>> >>>>> Any ideas or pointers gladly accepted. Thanks >>>>> >>>>> (*) I had success with this in the past when I booted with >>>>> MACHINE=emenlow >>>>> but that hardware isn't in the primary list. >>>> >>>> I'm not sure why this isn't working or what the problem might be... >>> >>> It complains it can't find /dev/fb0. See the boot log at >>> http://www.mlbassoc.com/poky/boot_2011-03-21.log >> >> Does your board have Intel graphics or PVR/SGX? emenlow has PVR/SGX >> which might explain this... > > I'm not familiar with the details - it's an older Atom with the Poulsbo > chipset. > The details (cpuinfo, lspci) are at > http://www.mlbassoc.com/poky/cpu_2011-03-21.info > The kernel is also not finding my SATA controller - should I expect that > to work? I'd suggest trying the meta-emenlow BSP from the meta-intel layer and see if you make it further as it also uses the Poulsbo chipset. Tom Z. on CC as he has the most experience with that BSP. -- Darren Hart Intel Open Source Technology Center Yocto Project - Linux Kernel