From mboxrd@z Thu Jan  1 00:00:00 1970
From: Felix Fietkau <nbd@openwrt.org>
Date: Tue, 29 Mar 2011 19:43:47 +0200
Subject: [ath9k-devel] how to config AR9280 for operation as 1X1 or
 other ideas
In-Reply-To: <AANLkTinr7t3pfaA_X-+KeS8ypS=kezYb=O0AcBjOWvHK@mail.gmail.com>
References: <AANLkTikmWb00r5p2OVOfqY17n+CUsqyfbNeM_zPUXTsa@mail.gmail.com>	<4D91EE58.5050603@openwrt.org>	<AANLkTi=3kmv6T4H_scdFkGtk09exKjD0RYKprHXmQB-6@mail.gmail.com>	<4D91FA8B.5050606@openwrt.org>	<AANLkTim=QXsb+Mc4ujDK6-J6hLe5nJxyCEmNssdOfRVW@mail.gmail.com>	<4D921507.30202@openwrt.org>	<AANLkTimzMyswtE-476HyccLCBr6kREv_=x+yyNeYRJU-@mail.gmail.com>	<4D9217CC.5000102@openwrt.org>
	<AANLkTinr7t3pfaA_X-+KeS8ypS=kezYb=O0AcBjOWvHK@mail.gmail.com>
Message-ID: <4D921A53.2080501@openwrt.org>
List-Id: <ath9k-devel.lists.ath9k.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: ath9k-devel@lists.ath9k.org

On 2011-03-29 7:38 PM, Larry Vaden wrote:
> On Tue, Mar 29, 2011 at 12:33 PM, Felix Fietkau<nbd@openwrt.org>  wrote:
>>
>>  Still very noisy and high busy time, something is causing quite a bit of
>>  interference. No idea how to reduce that or track it down though.
>
> Felix and Matt,
>
> Is the channel map that Robert provided for the SR9 applicable to the AR9280?
The channel map is specific to the UBNT hardware that you're using. It 
has nothing to do with the AR9280 chip. I don't know if it's accurate 
for your hardware, you have to ask UBNT.

> (read: are we sweeping through the right channels and not violating
> some FCC reg?)
>
> Felix,
>
> Can we specify frequency rather than channel in OpenWrt to get to a specific f?
No, hostapd needs the channel number.

- Felix