From: Valentin Longchamp <valentin.longchamp@keymile.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] Keymile boards mainlining, part 2
Date: Mon, 11 Apr 2011 12:05:18 +0200 [thread overview]
Message-ID: <4DA2D25E.2050806@keymile.com> (raw)
In-Reply-To: <F766E4F80769BD478052FB6533FA745D19F9A2A827@SC-VEXCH4.marvell.com>
Prafulla Wadaskar wrote:
>
>> -----Original Message-----
>> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
>> On Behalf Of Valentin Longchamp
>> Sent: Friday, April 08, 2011 6:23 PM
>> To: u-boot at lists.denx.de
>> Cc: hs at denx.de; holger.brunck at keymile.com
>> Subject: Re: [U-Boot] [PATCH] Keymile boards mainlining, part 2
>>
>> Sorry, the whole series is not numbered, -N statt -n ... it will be
>> corrected for the very likely v2 of the series posting.
>
> It would be good if you can split patch series in to small group as per functionality/SoC, so that it is easy to pull.
>
I agree with you about this point. We did it this way since even if some
patches affect only one SoC/functionality, there may be some
dependancies between patches that are not in the same SoC/functionality
group.
I'll see what I can do.
--
Valentin Longchamp
Embedded Software Engineer
Hardware and Chip Integration
______________________________________
KEYMILE AG
Schwarzenburgstr. 73
CH-3097 Liebefeld
Phone +41 31 377 1318
Fax +41 31 377 1212
valentin.longchamp at keymile.com
www.keymile.com
______________________________________
KEYMILE: A Specialist as a Partner
prev parent reply other threads:[~2011-04-11 10:05 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-08 12:47 [U-Boot] [PATCH] Keymile boards mainlining, part 2 Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] lib, vsprintf: introduce strict_strtoul Valentin Longchamp
2011-04-29 23:12 ` Wolfgang Denk
2011-04-08 12:47 ` [U-Boot] [PATCH] powerpc/km82xx: add DIP switch detection Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] km/common: remove hdlc_enet implementation Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] powerpc/km82xx: cleanup coding style for mgcoge.c Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] powerpc/km82xx: rename mgcoge files to km82xx Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] powerpc/km82xx: move SDRAM config to board config Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] powerpc/km82xx: adapt CONFIG_SYSSYPCR to manual Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] powerpc/km82xx: rename mgcoge2ne to mgcoge3ne board support Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] poweprc/km82xx: add board specific environment variable Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] arm/km: add addbootcount " Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] cramfs: make cramfs usable without a NOR flash Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] i2c, soft_i2c: deblock bus if switching to another i2c bus Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] km/common: fix initial_boot_bank for bootpackages Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] common/hush: make get_local_var visible for other users Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] km/common: implement setboardid as a command Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] km/common: replace env var checkboardidlist by function Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] km/common: add pnvramsize to default environment Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] km/common: fix coding style issues in generic header Valentin Longchamp
2011-04-08 12:47 ` [U-Boot] [PATCH] km/common: simplify default environment Valentin Longchamp
2011-04-08 12:52 ` [U-Boot] [PATCH] Keymile boards mainlining, part 2 Valentin Longchamp
2011-04-08 14:19 ` Valentin Longchamp
2011-04-09 9:29 ` Prafulla Wadaskar
2011-04-11 10:05 ` Valentin Longchamp [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DA2D25E.2050806@keymile.com \
--to=valentin.longchamp@keymile.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.