From mboxrd@z Thu Jan 1 00:00:00 1970 From: Erik Brakkee Date: Tue, 12 Apr 2011 15:33:27 +0000 Subject: Re: [lm-sensors] System instability with Supermicro X8DTi-F and Message-Id: <4DA470C7.3000907@brakkee.org> List-Id: References: <4DA43970.6040605@brakkee.org> In-Reply-To: <4DA43970.6040605@brakkee.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Philip Pokorny wrote: > Your motherboard BIOS includes fan speed control and a BMC for sensor > monitoring > > Use ipmitool and perhaps bmcsensors module to monitor sensors. > > Go into the bios and under hardware monitoring arrow down to see fan > speeds and then select the ES fan profile (lowest) rather than Off, > performance, balanced. That should make the fan speeds much slower and > quieter These are the steps that I already took. But I would like to use fancontrol because then I can make it really quiet most of the time, yet keep the server relatively cool when under high load. Are you saying that it is not possible to use fancontrol in combination with my motherboard? > > Phil P. > Nonsense and other useful things: http://brakkee.org MountainHoppers: http://mountainhoppers.nl Track Detective: http://trackdetective.com Twitter: http://twitter.com/ErikBrakkee _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors