From: Yinghai Lu <yinghai@kernel.org>
To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: e1000-devel@lists.sourceforge.net, NetDev <netdev@vger.kernel.org>
Subject: [PATCH] ixgbe: Remove not used blink_led_start/stop code
Date: Tue, 12 Apr 2011 16:30:33 -0700 [thread overview]
Message-ID: <4DA4E099.2080206@kernel.org> (raw)
In-Reply-To: <4DA4E016.1050800@kernel.org>
There is no user for those code.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/net/ixgbe/ixgbe_82598.c | 2 -
drivers/net/ixgbe/ixgbe_82599.c | 2 -
drivers/net/ixgbe/ixgbe_common.c | 56 ---------------------------------------
drivers/net/ixgbe/ixgbe_common.h | 2 -
drivers/net/ixgbe/ixgbe_type.h | 2 -
drivers/net/ixgbe/ixgbe_x540.c | 2 -
6 files changed, 66 deletions(-)
Index: linux-2.6/drivers/net/ixgbe/ixgbe_82598.c
===================================================================
--- linux-2.6.orig/drivers/net/ixgbe/ixgbe_82598.c
+++ linux-2.6/drivers/net/ixgbe/ixgbe_82598.c
@@ -1207,8 +1207,6 @@ static struct ixgbe_mac_operations mac_o
.get_link_capabilities = &ixgbe_get_link_capabilities_82598,
.led_on = &ixgbe_led_on_generic,
.led_off = &ixgbe_led_off_generic,
- .blink_led_start = &ixgbe_blink_led_start_generic,
- .blink_led_stop = &ixgbe_blink_led_stop_generic,
.set_rar = &ixgbe_set_rar_generic,
.clear_rar = &ixgbe_clear_rar_generic,
.set_vmdq = &ixgbe_set_vmdq_82598,
Index: linux-2.6/drivers/net/ixgbe/ixgbe_82599.c
===================================================================
--- linux-2.6.orig/drivers/net/ixgbe/ixgbe_82599.c
+++ linux-2.6/drivers/net/ixgbe/ixgbe_82599.c
@@ -2052,8 +2052,6 @@ static struct ixgbe_mac_operations mac_o
.get_link_capabilities = &ixgbe_get_link_capabilities_82599,
.led_on = &ixgbe_led_on_generic,
.led_off = &ixgbe_led_off_generic,
- .blink_led_start = &ixgbe_blink_led_start_generic,
- .blink_led_stop = &ixgbe_blink_led_stop_generic,
.set_rar = &ixgbe_set_rar_generic,
.clear_rar = &ixgbe_clear_rar_generic,
.set_vmdq = &ixgbe_set_vmdq_generic,
Index: linux-2.6/drivers/net/ixgbe/ixgbe_common.c
===================================================================
--- linux-2.6.orig/drivers/net/ixgbe/ixgbe_common.c
+++ linux-2.6/drivers/net/ixgbe/ixgbe_common.c
@@ -2242,62 +2242,6 @@ s32 ixgbe_enable_rx_dma_generic(struct i
}
/**
- * ixgbe_blink_led_start_generic - Blink LED based on index.
- * @hw: pointer to hardware structure
- * @index: led number to blink
- **/
-s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
-{
- ixgbe_link_speed speed = 0;
- bool link_up = 0;
- u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
-
- /*
- * Link must be up to auto-blink the LEDs;
- * Force it if link is down.
- */
- hw->mac.ops.check_link(hw, &speed, &link_up, false);
-
- if (!link_up) {
- autoc_reg |= IXGBE_AUTOC_AN_RESTART;
- autoc_reg |= IXGBE_AUTOC_FLU;
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
- msleep(10);
- }
-
- led_reg &= ~IXGBE_LED_MODE_MASK(index);
- led_reg |= IXGBE_LED_BLINK(index);
- IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
- IXGBE_WRITE_FLUSH(hw);
-
- return 0;
-}
-
-/**
- * ixgbe_blink_led_stop_generic - Stop blinking LED based on index.
- * @hw: pointer to hardware structure
- * @index: led number to stop blinking
- **/
-s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index)
-{
- u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
-
- autoc_reg &= ~IXGBE_AUTOC_FLU;
- autoc_reg |= IXGBE_AUTOC_AN_RESTART;
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
-
- led_reg &= ~IXGBE_LED_MODE_MASK(index);
- led_reg &= ~IXGBE_LED_BLINK(index);
- led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
- IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
- IXGBE_WRITE_FLUSH(hw);
-
- return 0;
-}
-
-/**
* ixgbe_get_san_mac_addr_offset - Get SAN MAC address offset from the EEPROM
* @hw: pointer to hardware structure
* @san_mac_offset: SAN MAC address offset
Index: linux-2.6/drivers/net/ixgbe/ixgbe_common.h
===================================================================
--- linux-2.6.orig/drivers/net/ixgbe/ixgbe_common.h
+++ linux-2.6/drivers/net/ixgbe/ixgbe_common.h
@@ -85,8 +85,6 @@ s32 ixgbe_check_mac_link_generic(struct
bool *link_up, bool link_up_wait_to_complete);
s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
u16 *wwpn_prefix);
-s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index);
-s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index);
void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf);
void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf);
Index: linux-2.6/drivers/net/ixgbe/ixgbe_type.h
===================================================================
--- linux-2.6.orig/drivers/net/ixgbe/ixgbe_type.h
+++ linux-2.6/drivers/net/ixgbe/ixgbe_type.h
@@ -2530,8 +2530,6 @@ struct ixgbe_mac_operations {
/* LED */
s32 (*led_on)(struct ixgbe_hw *, u32);
s32 (*led_off)(struct ixgbe_hw *, u32);
- s32 (*blink_led_start)(struct ixgbe_hw *, u32);
- s32 (*blink_led_stop)(struct ixgbe_hw *, u32);
/* RAR, Multicast, VLAN */
s32 (*set_rar)(struct ixgbe_hw *, u32, u8 *, u32, u32);
Index: linux-2.6/drivers/net/ixgbe/ixgbe_x540.c
===================================================================
--- linux-2.6.orig/drivers/net/ixgbe/ixgbe_x540.c
+++ linux-2.6/drivers/net/ixgbe/ixgbe_x540.c
@@ -681,8 +681,6 @@ static struct ixgbe_mac_operations mac_o
.get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic,
.led_on = &ixgbe_led_on_generic,
.led_off = &ixgbe_led_off_generic,
- .blink_led_start = &ixgbe_blink_led_start_generic,
- .blink_led_stop = &ixgbe_blink_led_stop_generic,
.set_rar = &ixgbe_set_rar_generic,
.clear_rar = &ixgbe_clear_rar_generic,
.set_vmdq = &ixgbe_set_vmdq_generic,
------------------------------------------------------------------------------
Forrester Wave Report - Recovery time is now measured in hours and minutes
not days. Key insights are discussed in the 2010 Forrester Wave Report as
part of an in-depth evaluation of disaster recovery service providers.
Forrester found the best-in-class provider in terms of services and vision.
Read this report now! http://p.sf.net/sfu/ibm-webcastpromo
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
next prev parent reply other threads:[~2011-04-12 23:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-12 23:28 [PATCH] e1000: Remove blink_led_start declaration Yinghai Lu
2011-04-12 23:30 ` Yinghai Lu [this message]
2011-04-13 0:29 ` [PATCH] ixgbe: Remove not used blink_led_start/stop code Jeff Kirsher
2011-04-13 3:53 ` [PATCH] e1000: Remove blink_led_start declaration Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DA4E099.2080206@kernel.org \
--to=yinghai@kernel.org \
--cc=e1000-devel@lists.sourceforge.net \
--cc=jeffrey.t.kirsher@intel.com \
--cc=jesse.brandeburg@intel.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.