All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Greear <greearb@candelatech.com>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: 2.6.39-rc3-wl+ blocked 'mount' task, won't complete booting.
Date: Wed, 13 Apr 2011 09:47:34 -0700	[thread overview]
Message-ID: <4DA5D3A6.8010708@candelatech.com> (raw)

This may be related to the other bug I just posted
"WARNING at libata-core.c:5015 in 2.6.39-rc3-wl+, then lockup.", but I didn't
see any warnings print before these


Console: switching to colour frame buffer device 160x64
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
dracut: Scanning devices sda2  for LVM logical volumes VolGroup/lv_root VolGroup/lv_swap
dracut: inactive '/dev/VolGroup/lv_root' [10.47 GiB] inherit
dracut: inactive '/dev/VolGroup/lv_swap' [3.94 GiB] inherit
EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
EXT4-fs (dm-0): write access will be enabled during recovery


SysRq : Show Locks Held

Showing all locks held in the system:
1 lock held by mount/226:
  #0:  (&type->s_umount_key#19/1){+.+.+.}, at: [<c04e7b48>] sget+0x1f6/0x339

=============================================

SysRq : Show backtrace of all active CPUs
sending NMI to all CPUs:
NMI backtrace for cpu 0
Modules linked in: i915 drm_kms_helper drm i2c_algo_bit video [last unloaded: scsi_wait_scan]

Pid: 0, comm: swapper Not tainted 2.6.39-rc3-wl+ #58 To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M.
EIP: 0060:[<c046117f>] EFLAGS: 00000046 CPU: 0
EIP is at trace_hardirqs_off+0xc/0xd
EAX: 00000046 EBX: 00000003 ECX: c046117e EDX: c041ad61
ESI: 00000002 EDI: 00000006 EBP: f540ff04 ESP: f540fef4
  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=f540e000 task=c0a26020 task.ti=c09e4000)
Stack:
  c041ad61 00000000 c0a58518 00000007 f540ff10 c041aaf7 00000000 f540ff20
  c041b045 c092d864 0000006c f540ff28 c06548a8 f540ff4c c0654b3f c09285f1
  c09740d6 c07f3f01 00000092 c106c204 0000006c fffdd64c f540ff54 c0654d59
Call Trace:
  [<c041ad61>] ? default_send_IPI_mask_logical+0x92/0xa9
  [<c041aaf7>] default_send_IPI_all+0x27/0x6a
  [<c041b045>] arch_trigger_all_cpu_backtrace+0x3e/0x69
  [<c06548a8>] sysrq_handle_showallcpus+0xd/0xf
  [<c0654b3f>] __handle_sysrq+0xa0/0x115
  [<c07f3f01>] ? _raw_spin_lock_irqsave+0x35/0x44
  [<c0654d59>] handle_sysrq+0x2b/0x2d
  [<c0664580>] serial8250_handle_port+0x13f/0x269
  [<c06646fc>] serial8250_interrupt+0x52/0xea
  [<c0484004>] handle_irq_event_percpu+0x58/0x17b
  [<c0484158>] handle_irq_event+0x31/0x48
  [<c0485c53>] ? handle_percpu_irq+0x40/0x40
  [<c0485ce2>] handle_edge_irq+0x8f/0xb1
  <IRQ>
  [<c0403afe>] ? do_IRQ+0x3c/0x95
  [<c07fa92e>] ? common_interrupt+0x2e/0x40
  [<c046007b>] ? ftrace_raw_output_lock+0x53/0xaa
  [<c0617633>] ? intel_idle+0xbf/0xe8
  [<c0724bd0>] ? cpuidle_idle_call+0xcd/0x141
  [<c0402439>] ? cpu_idle+0x58/0x77
  [<c07d9166>] ? rest_init+0x92/0x97
  [<c0a817f8>] ? start_kernel+0x30f/0x314
  [<c0a810c5>] ? i386_start_kernel+0xc5/0xcc
Code: 3c 04 00 00 00 00 00 00 89 b3 30 04 00 00 40 89 83 28 04 00 00 89 83 38 04 00 00 5b 5e 5d c3 55 89 e5 8b 45 04 e8 64 ff ff ff 5d <c3> 55 31 c9
Call Trace:
  [<c041ad61>] ? default_send_IPI_mask_logical+0x92/0xa9
  [<c041aaf7>] default_send_IPI_all+0x27/0x6a
  [<c041b045>] arch_trigger_all_cpu_backtrace+0x3e/0x69
  [<c06548a8>] sysrq_handle_showallcpus+0xd/0xf
  [<c0654b3f>] __handle_sysrq+0xa0/0x115
  [<c07f3f01>] ? _raw_spin_lock_irqsave+0x35/0x44
  [<c0654d59>] handle_sysrq+0x2b/0x2d
  [<c0664580>] serial8250_handle_port+0x13f/0x269
  [<c06646fc>] serial8250_interrupt+0x52/0xea
  [<c0484004>] handle_irq_event_percpu+0x58/0x17b
  [<c0484158>] handle_irq_event+0x31/0x48
  [<c0485c53>] ? handle_percpu_irq+0x40/0x40
  [<c0485ce2>] handle_edge_irq+0x8f/0xb1
  <IRQ>  [<c0403afe>] ? do_IRQ+0x3c/0x95
  [<c07fa92e>] ? common_interrupt+0x2e/0x40
  [<c046007b>] ? ftrace_raw_output_lock+0x53/0xaa
  [<c0617633>] ? intel_idle+0xbf/0xe8
  [<c0724bd0>] ? cpuidle_idle_call+0xcd/0x141
  [<c0402439>] ? cpu_idle+0x58/0x77
  [<c07d9166>] ? rest_init+0x92/0x97
  [<c0a817f8>] ? start_kernel+0x30f/0x314
  [<c0a810c5>] ? i386_start_kernel+0xc5/0xcc
NMI backtrace for cpu 1
Modules linked in: i915 drm_kms_helper drm i2c_algo_bit video [last unloaded: scsi_wait_scan]

Pid: 0, comm: kworker/0:0 Not tainted 2.6.39-rc3-wl+ #58 To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M.
EIP: 0060:[<c0617615>] EFLAGS: 00000046 CPU: 1
EIP is at intel_idle+0xa1/0xe8
EAX: 00000030 EBX: a22b5320 ECX: 00000001 EDX: 00000000
ESI: 12142a7a EDI: 00000010 EBP: f54e3f74 ESP: f54e3f60
  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process kworker/0:0 (pid: 0, ti=f54e2000 task=f5497170 task.ti=f54e2000)
Stack:
  00000030 00000001 ff7f2000 00000001 00000108 f54e3f90 c0724bd0 00000001
  ff7f2118 c0a7de78 00000001 00000000 f54e3fa0 c0402439 00000001 00000000
  f54e3fac c07eede1 01020800 00000000 00000000 00000000 00000000 00000000
Call Trace:
  [<c0724bd0>] cpuidle_idle_call+0xcd/0x141
  [<c0402439>] cpu_idle+0x58/0x77
  [<c07eede1>] start_secondary+0x176/0x17b
Code: 08 8b 52 08 80 e2 08 75 22 31 d2 89 d1 0f 01 c8 0f ae f0 89 f6 89 e0 25 00 e0 ff ff 8b 40 08 a8 08 75 08 b1 01 8b 45 ec 0f 01 c9 <e8> 9f f4 e7
Call Trace:
  [<c0724bd0>] cpuidle_idle_call+0xcd/0x141
  [<c0402439>] cpu_idle+0x58/0x77
  [<c07eede1>] start_secondary+0x176/0x17b

INFO: task mount:226 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
mount           D 00000000     0   226      1 0x00000000
  f4555c54 00000046 f443c830 00000000 c0b19600 f443c830 c0b19600 c0b19600
  f443caa4 c0b19600 92c0bf72 00000001 00000000 00000001 f443c830 00000046
  f443c830 f443c830 00000000 00000006 b25a2e57 f4555c2c c045935d f44c522c
Call Trace:
  [<c045935d>] ? timekeeping_get_ns+0x16/0x52
  [<c045a58b>] ? ktime_get_ts+0x98/0xa2
  [<c07f28b9>] io_schedule+0x72/0xab
  [<c0506981>] sleep_on_buffer+0xd/0x11
  [<c07f2f07>] __wait_on_bit+0x39/0x60
  [<c0506974>] ? unmap_underlying_metadata+0x51/0x51
  [<c0506974>] ? unmap_underlying_metadata+0x51/0x51
  [<c07f2fce>] out_of_line_wait_on_bit+0xa0/0xa8
  [<c0452114>] ? autoremove_wake_function+0x34/0x34
  [<c05068ef>] __wait_on_buffer+0x20/0x23
  [<c057c784>] jread+0x1a5/0x1da
  [<c0461cb6>] ? trace_hardirqs_on_caller+0x10e/0x12f
  [<c0461ce2>] ? trace_hardirqs_on+0xb/0xd
  [<c057cb53>] do_one_pass+0x39a/0x6e7
  [<c057cff0>] jbd2_journal_recover+0xa2/0x142
  [<c0580f90>] jbd2_journal_load+0x109/0x2cb
  [<c0560ab6>] ? ext4_fill_super+0x17e2/0x239b
  [<c0560ab6>] ? ext4_fill_super+0x17e2/0x239b
  [<c0560ab6>] ? ext4_fill_super+0x17e2/0x239b
  [<c04d8c94>] ? kmem_cache_alloc_trace+0x92/0x9c
  [<c0560adc>] ext4_fill_super+0x1808/0x239b
  [<c05ce464>] ? snprintf+0x15/0x17
  [<c052cdc1>] ? disk_name+0x29/0x6e
  [<c04e7e6d>] mount_bdev+0x107/0x140
  [<c04d8ad9>] ? __kmalloc_track_caller+0x10b/0x117
  [<c055ba0e>] ext4_mount+0x15/0x17
  [<c055f2d4>] ? ext4_register_li_request+0x290/0x290
  [<c04e7889>] mount_fs+0x61/0x12a
  [<c04fa730>] ? alloc_vfsmnt+0xa6/0x122
  [<c04faf40>] vfs_kern_mount+0x51/0x7e
  [<c04fb747>] do_kern_mount+0x34/0xb4
  [<c04fc3a7>] do_mount+0x614/0x662
  [<c04fc45b>] sys_mount+0x66/0x94
  [<c07fa35c>] sysenter_do_call+0x12/0x38
1 lock held by mount/226:
  #0:  (&type->s_umount_key#19/1){+.+.+.}, at: [<c04e7b48>] sget+0x1f6/0x339


-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com


                 reply	other threads:[~2011-04-13 16:47 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4DA5D3A6.8010708@candelatech.com \
    --to=greearb@candelatech.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.