From: Gary Thomas <gary@mlbassoc.com>
To: Poky Project <poky@yoctoproject.org>
Subject: [PATCH v2] Control over when package init scripts are run
Date: Mon, 18 Apr 2011 08:23:27 -0600 [thread overview]
Message-ID: <4DAC495F.2040406@mlbassoc.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 782 bytes --]
When a package is built, some installation scripts must be
performed on the target. In the case of a complete image,
these scripts are run by a separate step at init time, but
only during the first boot (other package install scripts
can just be run when the package is installed on the target).
This patch lets the distribution (or user) decide when these
postponed install scripts should run. The default is normally
near the end of init, but there may be times when it's beneficial
to run them earlier so the "when" can be overridden.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
[-- Attachment #2: 0001-Control-over-when-package-init-scripts-are-run.patch --]
[-- Type: text/x-patch, Size: 5970 bytes --]
From c0996c57cd3a6c87e277272058057b7d2212038a Mon Sep 17 00:00:00 2001
From: Gary Thomas <gary@mlbassoc.com>
Date: Mon, 18 Apr 2011 08:17:26 -0600
Subject: [PATCH] Control over when package init scripts are run
When a package is built, some installation scripts must be
performed on the target. In the case of a complete image,
these scripts are run by a separate step at init time, but
only during the first boot (other package install scripts
can just be run when the package is installed on the target).
This patch lets the distribution (or user) decide when these
postponed install scripts should run. The default is normally
near the end of init, but there may be times when it's beneficial
to run them earlier so the "when" can be overridden.
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
---
meta/classes/rootfs_rpm.bbclass | 11 ++++++++---
meta/recipes-devtools/opkg/opkg.inc | 4 ++++
meta/recipes-devtools/opkg/opkg_0.1.8.bb | 13 ++++---------
meta/recipes-devtools/opkg/opkg_svn.bb | 13 ++++---------
4 files changed, 20 insertions(+), 21 deletions(-)
diff --git a/meta/classes/rootfs_rpm.bbclass b/meta/classes/rootfs_rpm.bbclass
index 04ccabd..887b894 100644
--- a/meta/classes/rootfs_rpm.bbclass
+++ b/meta/classes/rootfs_rpm.bbclass
@@ -26,6 +26,11 @@ RPM_POSTPROCESS_COMMANDS = ""
#
#IMAGE_LOCALES="en-gb"
+#
+# Allow distributions to alter when [postponed] package install scripts are run
+#
+POSTINSTALL_INITPOSITION ?= "98"
+
rpmlibdir = "/var/lib/rpm"
opkglibdir = "${localstatedir}/lib/opkg"
@@ -116,7 +121,7 @@ EOF
install -d ${IMAGE_ROOTFS}/${sysconfdir}/rcS.d
# Stop $i getting expanded below...
i=\$i
- cat > ${IMAGE_ROOTFS}${sysconfdir}/rcS.d/S98configure << EOF
+ cat > ${IMAGE_ROOTFS}${sysconfdir}/rcS.d/S${POSTINSTALL_INITPOSITION}configure << EOF
#!/bin/sh
for i in /etc/rpm-postinsts/*.sh; do
echo "Running postinst $i..."
@@ -127,9 +132,9 @@ for i in /etc/rpm-postinsts/*.sh; do
echo "ERROR: postinst $i failed."
fi
done
-rm -f ${sysconfdir}/rcS.d/S98configure
+rm -f ${sysconfdir}/rcS.d/S${POSTINSTALL_INITPOSITION}configure
EOF
- chmod 0755 ${IMAGE_ROOTFS}${sysconfdir}/rcS.d/S98configure
+ chmod 0755 ${IMAGE_ROOTFS}${sysconfdir}/rcS.d/S${POSTINSTALL_INITPOSITION}configure
install -d ${IMAGE_ROOTFS}/${sysconfdir}
echo ${BUILDNAME} > ${IMAGE_ROOTFS}/${sysconfdir}/version
diff --git a/meta/recipes-devtools/opkg/opkg.inc b/meta/recipes-devtools/opkg/opkg.inc
index c317491..50f1afc 100644
--- a/meta/recipes-devtools/opkg/opkg.inc
+++ b/meta/recipes-devtools/opkg/opkg.inc
@@ -34,3 +34,7 @@ BBCLASSEXTEND = "native nativesdk"
PKGSUFFIX = ""
PKGSUFFIX_virtclass-nativesdk = "-nativesdk"
+
+# Define a variable to allow distros to run configure earlier.
+# (for example, to enable loading of ethernet kernel modules before networking starts)
+POSTINSTALL_INITPOSITION ?= "98"
diff --git a/meta/recipes-devtools/opkg/opkg_0.1.8.bb b/meta/recipes-devtools/opkg/opkg_0.1.8.bb
index 6815474..18cf042 100644
--- a/meta/recipes-devtools/opkg/opkg_0.1.8.bb
+++ b/meta/recipes-devtools/opkg/opkg_0.1.8.bb
@@ -13,7 +13,7 @@ SRC_URI = "http://opkg.googlecode.com/files/opkg-${PV}.tar.gz \
file://headerfix.patch \
"
-PR = "r3"
+PR = "r4"
PACKAGES =+ "libopkg${PKGSUFFIX}-dev libopkg${PKGSUFFIX} update-alternatives-cworth${PKGSUFFIX}"
@@ -26,11 +26,6 @@ do_install_append() {
install -d ${D}${localstatedir}/lib/opkg
}
-# Define a variable to allow distros to run configure earlier.
-# (for example, to enable loading of ethernet kernel modules before networking starts)
-OPKG_INIT_POSITION = "98"
-OPKG_INIT_POSITION_slugos = "41"
-
pkg_postinst_${PN} () {
#!/bin/sh
if [ "x$D" != "x" ]; then
@@ -38,9 +33,9 @@ if [ "x$D" != "x" ]; then
# this happens at S98 where our good 'ole packages script used to run
echo "#!/bin/sh
opkg-cl configure
-rm -f /${sysconfdir}/rcS.d/S${OPKG_INIT_POSITION}configure
-" > $D${sysconfdir}/rcS.d/S${OPKG_INIT_POSITION}configure
- chmod 0755 $D${sysconfdir}/rcS.d/S${OPKG_INIT_POSITION}configure
+rm -f /${sysconfdir}/rcS.d/S${POSTINSTALL_INITPOSITION}configure
+" > $D${sysconfdir}/rcS.d/S${POSTINSTALL_INITPOSITION}configure
+ chmod 0755 $D${sysconfdir}/rcS.d/S${POSTINSTALL_INITPOSITION}configure
fi
update-alternatives --install ${bindir}/opkg opkg ${bindir}/opkg-cl 100
diff --git a/meta/recipes-devtools/opkg/opkg_svn.bb b/meta/recipes-devtools/opkg/opkg_svn.bb
index 76ec838..d8af823 100644
--- a/meta/recipes-devtools/opkg/opkg_svn.bb
+++ b/meta/recipes-devtools/opkg/opkg_svn.bb
@@ -16,7 +16,7 @@ SRC_URI = "svn://opkg.googlecode.com/svn;module=trunk;proto=http \
S = "${WORKDIR}/trunk"
PV = "0.1.8+svnr${SRCPV}"
-PR = "r1"
+PR = "r2"
PACKAGES =+ "libopkg${PKGSUFFIX}-dev libopkg${PKGSUFFIX} update-alternatives-cworth${PKGSUFFIX}"
@@ -29,11 +29,6 @@ do_install_append() {
install -d ${D}${localstatedir}/lib/opkg
}
-# Define a variable to allow distros to run configure earlier.
-# (for example, to enable loading of ethernet kernel modules before networking starts)
-OPKG_INIT_POSITION = "98"
-OPKG_INIT_POSITION_slugos = "41"
-
pkg_postinst_${PN} () {
#!/bin/sh
if [ "x$D" != "x" ]; then
@@ -41,9 +36,9 @@ if [ "x$D" != "x" ]; then
# this happens at S98 where our good 'ole packages script used to run
echo "#!/bin/sh
opkg-cl configure
-rm -f /${sysconfdir}/rcS.d/S${OPKG_INIT_POSITION}configure
-" > $D${sysconfdir}/rcS.d/S${OPKG_INIT_POSITION}configure
- chmod 0755 $D${sysconfdir}/rcS.d/S${OPKG_INIT_POSITION}configure
+rm -f /${sysconfdir}/rcS.d/S${POSTINSTALL_INITPOSITION}configure
+" > $D${sysconfdir}/rcS.d/S${POSTINSTALL_INITPOSITION}configure
+ chmod 0755 $D${sysconfdir}/rcS.d/S${POSTINSTALL_INITPOSITION}configure
fi
update-alternatives --install ${bindir}/opkg opkg ${bindir}/opkg-cl 100
--
1.7.3.4
next reply other threads:[~2011-04-18 14:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-18 14:23 Gary Thomas [this message]
2011-04-25 5:04 ` [PATCH v2] Control over when package init scripts are run Saul Wold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DAC495F.2040406@mlbassoc.com \
--to=gary@mlbassoc.com \
--cc=poky@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.