From: Patrice Chotard <patrice.chotard@sfr.fr>
To: linux-media@vger.kernel.org, Jean-Francois Moine <moinejf@free.fr>
Cc: Theodore Kilgore <kilgota@banach.math.auburn.edu>
Subject: [PATCH 4/5] gspca - jeilinj: Add SPORTSCAM_DV15 camera support
Date: Mon, 18 Apr 2011 22:40:54 +0200 [thread overview]
Message-ID: <4DACA1D6.3050400@sfr.fr> (raw)
Signed-off-by: Patrice CHOTARD <patricechotard@free.fr>
---
Documentation/video4linux/gspca.txt | 1 +
drivers/media/video/gspca/jeilinj.c | 98 ++++++++++++++++++++++++-----------
2 files changed, 68 insertions(+), 31 deletions(-)
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 56ba7bb..6b85f4f 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -265,6 +265,7 @@ pac7302 093a:2629 Genious iSlim 300
pac7302 093a:262a Webcam 300k
pac7302 093a:262c Philips SPC 230 NC
jeilinj 0979:0280 Sakar 57379
+jeilinj 0979:0280 Sportscam DV15
zc3xx 0ac8:0302 Z-star Vimicro zc0302
vc032x 0ac8:0321 Vimicro generic vc0321
vc032x 0ac8:0323 Vimicro Vc0323
diff --git a/drivers/media/video/gspca/jeilinj.c b/drivers/media/video/gspca/jeilinj.c
index 51b68db..da92867 100644
--- a/drivers/media/video/gspca/jeilinj.c
+++ b/drivers/media/video/gspca/jeilinj.c
@@ -34,6 +34,7 @@ MODULE_LICENSE("GPL");
/* Default timeouts, in ms */
#define JEILINJ_CMD_TIMEOUT 500
+#define JEILINJ_CMD_DELAY 160
#define JEILINJ_DATA_TIMEOUT 1000
/* Maximum transfer size to use. */
@@ -41,12 +42,17 @@ MODULE_LICENSE("GPL");
#define FRAME_HEADER_LEN 0x10
#define FRAME_START 0xFFFFFFFF
+enum {
+ SAKAR_57379,
+ SPORTSCAM_DV15,
+};
/* Structure to hold all of our device specific stuff */
struct sd {
struct gspca_dev gspca_dev; /* !! must be the first item */
int blocks_left;
const struct v4l2_pix_format *cap_mode;
/* Driver stuff */
+ u8 type;
u8 quality; /* image quality */
u8 jpeg_hdr[JPEG_HDR_SZ];
};
@@ -54,6 +60,7 @@ struct sd {
struct jlj_command {
unsigned char instruction[2];
unsigned char ack_wanted;
+ unsigned char delay;
};
/* AFAICT these cameras will only do 320x240. */
@@ -114,41 +121,53 @@ static void jlj_read1(struct gspca_dev *gspca_dev, unsigned char response)
static int jlj_start(struct gspca_dev *gspca_dev)
{
int i;
+ int start_commands_size;
u8 response = 0xff;
struct sd *sd = (struct sd *) gspca_dev;
struct jlj_command start_commands[] = {
- {{0x71, 0x81}, 0},
- {{0x70, 0x05}, 0},
- {{0x95, 0x70}, 1},
- {{0x71, 0x81}, 0},
- {{0x70, 0x04}, 0},
- {{0x95, 0x70}, 1},
- {{0x71, 0x00}, 0},
- {{0x70, 0x08}, 0},
- {{0x95, 0x70}, 1},
- {{0x94, 0x02}, 0},
- {{0xde, 0x24}, 0},
- {{0x94, 0x02}, 0},
- {{0xdd, 0xf0}, 0},
- {{0x94, 0x02}, 0},
- {{0xe3, 0x2c}, 0},
- {{0x94, 0x02}, 0},
- {{0xe4, 0x00}, 0},
- {{0x94, 0x02}, 0},
- {{0xe5, 0x00}, 0},
- {{0x94, 0x02}, 0},
- {{0xe6, 0x2c}, 0},
- {{0x94, 0x03}, 0},
- {{0xaa, 0x00}, 0},
- {{0x71, 0x1e}, 0},
- {{0x70, 0x06}, 0},
- {{0x71, 0x80}, 0},
- {{0x70, 0x07}, 0}
+ {{0x71, 0x81}, 0, 0},
+ {{0x70, 0x05}, 0, JEILINJ_CMD_DELAY},
+ {{0x95, 0x70}, 1, 0},
+ {{0x71, 0x81 - gspca_dev->curr_mode}, 0, 0},
+ {{0x70, 0x04}, 0, JEILINJ_CMD_DELAY},
+ {{0x95, 0x70}, 1, 0},
+ {{0x71, 0x00}, 0, 0}, /* start streaming ??*/
+ {{0x70, 0x08}, 0, JEILINJ_CMD_DELAY},
+ {{0x95, 0x70}, 1, 0},
+#define SPORTSCAM_DV15_CMD_SIZE 9
+ {{0x94, 0x02}, 0, 0},
+ {{0xde, 0x24}, 0, 0},
+ {{0x94, 0x02}, 0, 0},
+ {{0xdd, 0xf0}, 0, 0},
+ {{0x94, 0x02}, 0, 0},
+ {{0xe3, 0x2c}, 0, 0},
+ {{0x94, 0x02}, 0, 0},
+ {{0xe4, 0x00}, 0, 0},
+ {{0x94, 0x02}, 0, 0},
+ {{0xe5, 0x00}, 0, 0},
+ {{0x94, 0x02}, 0, 0},
+ {{0xe6, 0x2c}, 0, 0},
+ {{0x94, 0x03}, 0, 0},
+ {{0xaa, 0x00}, 0, 0},
+ {{0x71, 0x1e}, 0, 0},
+ {{0x70, 0x06}, 0, 0},
+ {{0x71, 0x80}, 0, 0},
+ {{0x70, 0x07}, 0, 0}
};
sd->blocks_left = 0;
- for (i = 0; i < ARRAY_SIZE(start_commands); i++) {
+ /* Under Windows, USB spy shows that only the 9 first start
+ * commands are used for SPORTSCAM_DV15 webcam
+ */
+ if (sd->type == SPORTSCAM_DV15)
+ start_commands_size = SPORTSCAM_DV15_CMD_SIZE;
+ else
+ start_commands_size = ARRAY_SIZE(start_commands);
+
+ for (i = 0; i < start_commands_size; i++) {
jlj_write2(gspca_dev, start_commands[i].instruction);
+ if (start_commands[i].delay)
+ msleep(start_commands[i].delay);
if (start_commands[i].ack_wanted)
jlj_read1(gspca_dev, response);
}
@@ -207,6 +226,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
struct cam *cam = &gspca_dev->cam;
struct sd *dev = (struct sd *) gspca_dev;
+ dev->type = id->driver_info;
dev->quality = 85;
PDEBUG(D_PROBE,
"JEILINJ camera detected"
@@ -277,14 +297,25 @@ static int sd_start(struct gspca_dev *gspca_dev)
/* Table of supported USB devices */
static const struct usb_device_id device_table[] = {
- {USB_DEVICE(0x0979, 0x0280)},
+ {USB_DEVICE(0x0979, 0x0280), .driver_info = SAKAR_57379},
+ {USB_DEVICE(0x0979, 0x0270), .driver_info = SPORTSCAM_DV15},
{}
};
MODULE_DEVICE_TABLE(usb, device_table);
/* sub-driver description */
-static const struct sd_desc sd_desc = {
+static const struct sd_desc sd_desc_sakar_57379 = {
+ .name = MODULE_NAME,
+ .config = sd_config,
+ .init = sd_init,
+ .start = sd_start,
+ .stopN = sd_stopN,
+ .pkt_scan = sd_pkt_scan,
+};
+
+/* sub-driver description */
+static const struct sd_desc sd_desc_sportscam_dv15 = {
.name = MODULE_NAME,
.config = sd_config,
.init = sd_init,
@@ -293,12 +324,17 @@ static const struct sd_desc sd_desc = {
.pkt_scan = sd_pkt_scan,
};
+static const struct sd_desc *sd_desc[2] = {
+ &sd_desc_sakar_57379,
+ &sd_desc_sportscam_dv15
+};
+
/* -- device connect -- */
static int sd_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
return gspca_dev_probe(intf, id,
- &sd_desc,
+ sd_desc[id->driver_info],
sizeof(struct sd),
THIS_MODULE);
}
--
1.7.0.4
reply other threads:[~2011-04-18 20:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DACA1D6.3050400@sfr.fr \
--to=patrice.chotard@sfr.fr \
--cc=kilgota@banach.math.auburn.edu \
--cc=linux-media@vger.kernel.org \
--cc=moinejf@free.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.