From: Michal Simek <monstr@monstr.eu>
To: Grant Likely <grant.likely@secretlab.ca>
Cc: devicetree-discuss@lists.ozlabs.org, john.williams@petalogix.com,
linux-kernel@vger.kernel.org, hjk@hansjkoch.de,
w.sang@pengutronix.de, arnd@arndb.de
Subject: Re: [PATCH v3] uio/pdrv_genirq: Add OF support
Date: Tue, 19 Apr 2011 10:15:18 +0200 [thread overview]
Message-ID: <4DAD4496.8050902@monstr.eu> (raw)
In-Reply-To: <20110419060816.GA5252@ponder.secretlab.ca>
Grant Likely wrote:
> On Mon, Apr 18, 2011 at 10:50:54AM +0200, Michal Simek wrote:
>> Adding OF binding to genirq.
>> Version string is setup to the "devicetree".
>>
>> Compatible string is not setup for now but you can add your
>> custom compatible string to uio_of_genirq_match structure.
>>
>> For example with "uio" compatible string:
>> static const struct of_device_id __devinitconst uio_of_genirq_match[] = {
>> { .compatible = "uio", },
>> { /* empty for now */ },
>> };
>>
>> Signed-off-by: Michal Simek <monstr@monstr.eu>
>>
>> ---
>>
>> v3: Fix irq binding
>> Use "devicetree" as version string
>>
>> v2: Remove additional resource binding
>> Setup correct version string
>> Clear compatible string
>> ---
>> drivers/uio/uio_pdrv_genirq.c | 42 +++++++++++++++++++++++++++++++++++++++++
>> 1 files changed, 42 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c
>> index 7174d51..c8d565a 100644
>> --- a/drivers/uio/uio_pdrv_genirq.c
>> +++ b/drivers/uio/uio_pdrv_genirq.c
>> @@ -23,6 +23,10 @@
>> #include <linux/pm_runtime.h>
>> #include <linux/slab.h>
>>
>> +#include <linux/of.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/of_address.h>
>> +
>> #define DRIVER_NAME "uio_pdrv_genirq"
>>
>> struct uio_pdrv_genirq_platdata {
>> @@ -97,6 +101,30 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev)
>> int ret = -EINVAL;
>> int i;
>>
>> + if (!uioinfo) {
>> + int irq;
>> +
>> + /* alloc uioinfo for one device */
>> + uioinfo = kzalloc(sizeof(*uioinfo), GFP_KERNEL);
>> + if (!uioinfo) {
>> + ret = -ENOMEM;
>> + dev_err(&pdev->dev, "unable to kmalloc\n");
>> + goto bad2;
>> + }
>> + uioinfo->name = pdev->dev.of_node->name;
>> + uioinfo->version = "devicetree";
>> +
>> + /* Multiple IRQs are not supported */
>> + irq = platform_get_irq(pdev, 0);
>> + if (irq < 0) {
>
> PowerPC and x86 will return 0 for an unassigned IRQ, as will most platforms.
Not for Microblaze but anyway I am OK to change it and I will look at that
(maybe even your) patch to fix Microblaze code to return 0 for an unassigned IRQs.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian
next prev parent reply other threads:[~2011-04-19 8:15 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-18 8:50 [PATCH v3] uio/pdrv_genirq: Add OF support Michal Simek
2011-04-18 8:50 ` Michal Simek
2011-04-18 10:35 ` Paul Mundt
2011-04-18 11:10 ` Michal Simek
2011-04-18 11:10 ` Michal Simek
2011-04-18 16:06 ` Wolfram Sang
2011-04-18 16:06 ` Wolfram Sang
2011-04-19 1:58 ` John Williams
2011-04-19 1:58 ` John Williams
2011-04-19 6:11 ` Grant Likely
2011-04-19 7:32 ` Arnd Bergmann
[not found] ` <201104190932.31777.arnd-r2nGTMty4D4@public.gmane.org>
2011-04-19 8:42 ` Michal Simek
2011-04-19 12:37 ` John Williams
2011-04-19 13:02 ` Arnd Bergmann
2011-04-19 14:49 ` Grant Likely
2011-04-19 15:07 ` Arnd Bergmann
2011-04-19 15:45 ` Grant Likely
2011-04-19 15:45 ` Grant Likely
2011-04-21 12:08 ` Wolfram Sang
2011-04-21 12:08 ` Wolfram Sang
2011-04-21 23:46 ` John Williams
2011-04-21 23:46 ` John Williams
2011-04-22 6:07 ` Wolfram Sang
2011-04-19 8:16 ` Michal Simek
2011-04-19 8:16 ` Michal Simek
2011-04-19 6:08 ` Grant Likely
2011-04-19 8:15 ` Michal Simek [this message]
2011-04-19 22:00 ` Hans J. Koch
2011-04-19 23:09 ` Scott Wood
2011-04-19 23:09 ` Scott Wood
2011-04-27 11:05 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DAD4496.8050902@monstr.eu \
--to=monstr@monstr.eu \
--cc=arnd@arndb.de \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=hjk@hansjkoch.de \
--cc=john.williams@petalogix.com \
--cc=linux-kernel@vger.kernel.org \
--cc=w.sang@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.