From: Held Bernhard <berny156@gmx.de>
To: linux-kernel@vger.kernel.org,
"David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org
Subject: Oops in 2.6.39 include/net/dst.h: dst_metrics_write_ptr() running l2tp over ipsec
Date: Mon, 25 Apr 2011 00:37:13 +0200 [thread overview]
Message-ID: <4DB4A619.9080600@gmx.de> (raw)
Hi,
I'm starting l2tp over ipsec (racoon, openl2tp) in a little script to
establish a VPN to my company. 2.6.38.x runs fine, but since 2.6.39-rc1
(exactly commit 62fa8a "net: Implement read-only protection and COW'ing
of metrics.") the kernel throws an oops. openl2tp is killed; after a 2nd
start of openl2tp the VPN is established and my PC continues to run
normally. The oops is 100% reproducible.
[ 101.620985] BUG: unable to handle kernel NULL pointer dereference at
(null)
[ 101.621050] IP: [< (null)>] (null)
[ 101.621084] PGD 6e53c067 PUD 3dd6a067 PMD 0
[ 101.621122] Oops: 0010 [#1] SMP
[ 101.621153] last sysfs file: /sys/devices/virtual/ppp/ppp/uevent
[ 101.621192] CPU 2
[ 101.621206] Modules linked in: l2tp_ppp pppox ppp_generic slhc
l2tp_netlink l2tp_core deflate zlib_deflate twofish_x86_64
twofish_common des_generic cbc ecb sha1_generic hmac af_key
iptable_filter snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device loop
snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec
snd_pcm snd_timer snd i2c_i801 iTCO_wdt psmouse soundcore snd_page_alloc
evdev uhci_hcd ehci_hcd thermal
[ 101.621552]
[ 101.621567] Pid: 5129, comm: openl2tpd Not tainted 2.6.39-rc4-Quad #3
Gigabyte Technology Co., Ltd. G33-DS3R/G33-DS3R
[ 101.621637] RIP: 0010:[<0000000000000000>] [< (null)>] (null)
[ 101.621684] RSP: 0018:ffff88003ddeba60 EFLAGS: 00010202
[ 101.621716] RAX: ffff88003ddb5600 RBX: ffff88003ddb5600 RCX:
0000000000000020
[ 101.621758] RDX: ffffffff81a69a00 RSI: ffffffff81b7ee61 RDI:
ffff88003ddb5600
[ 101.621800] RBP: ffff8800537cd900 R08: 0000000000000000 R09:
ffff88003ddb5600
[ 101.621840] R10: 0000000000000005 R11: 0000000000014b38 R12:
ffff88003ddb5600
[ 101.621881] R13: ffffffff81b7e480 R14: ffffffff81b7e8b8 R15:
ffff88003ddebad8
[ 101.621924] FS: 00007f06e4182700(0000) GS:ffff88007fd00000(0000)
knlGS:0000000000000000
[ 101.621971] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 101.622005] CR2: 0000000000000000 CR3: 0000000045274000 CR4:
00000000000006e0
[ 101.622046] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 101.622087] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 101.622129] Process openl2tpd (pid: 5129, threadinfo
ffff88003ddea000, task ffff88003de9a280)
[ 101.622177] Stack:
[ 101.622191] ffffffff81447efa ffff88007d3ded80 ffff88003de9a280
ffff88007d3ded80
[ 101.622245] 0000000000000001 ffff88003ddebbb8 ffffffff8148d5a7
0000000000000212
[ 101.622299] ffff88003dcea000 ffff88003dcea188 ffffffff00000001
ffffffff81b7e480
[ 101.622353] Call Trace:
[ 101.622374] [<ffffffff81447efa>] ? ipv4_blackhole_route+0x1ba/0x210
[ 101.622415] [<ffffffff8148d5a7>] ? xfrm_lookup+0x417/0x510
[ 101.622450] [<ffffffff8127672a>] ? extract_buf+0x9a/0x140
[ 101.622485] [<ffffffff8144c6a0>] ? __ip_flush_pending_frames+0x70/0x70
[ 101.622526] [<ffffffff8146fbbf>] ? udp_sendmsg+0x62f/0x810
[ 101.622562] [<ffffffff813f98a6>] ? sock_sendmsg+0x116/0x130
[ 101.622599] [<ffffffff8109df58>] ? find_get_page+0x18/0x90
[ 101.622633] [<ffffffff8109fd6a>] ? filemap_fault+0x12a/0x4b0
[ 101.622668] [<ffffffff813fb5c4>] ? move_addr_to_kernel+0x64/0x90
[ 101.622706] [<ffffffff81405d5a>] ? verify_iovec+0x7a/0xf0
[ 101.622739] [<ffffffff813fc772>] ? sys_sendmsg+0x292/0x420
[ 101.622774] [<ffffffff810b994a>] ? handle_pte_fault+0x8a/0x7c0
[ 101.622810] [<ffffffff810b76fe>] ? __pte_alloc+0xae/0x130
[ 101.622844] [<ffffffff810ba2f8>] ? handle_mm_fault+0x138/0x380
[ 101.622880] [<ffffffff81024af9>] ? do_page_fault+0x189/0x410
[ 101.622915] [<ffffffff813fbe03>] ? sys_getsockname+0xf3/0x110
[ 101.622952] [<ffffffff81450c4d>] ? ip_setsockopt+0x4d/0xa0
[ 101.622986] [<ffffffff813f9932>] ? sockfd_lookup_light+0x22/0x90
[ 101.623024] [<ffffffff814b61fb>] ? system_call_fastpath+0x16/0x1b
[ 101.623060] Code: Bad RIP value.
[ 101.623090] RIP [< (null)>] (null)
[ 101.623125] RSP <ffff88003ddeba60>
[ 101.623146] CR2: 0000000000000000
[ 101.650871] ---[ end trace ca3856a7d8e8dad4 ]---
[ 101.651011] __sk_free: optmem leakage (160 bytes) detected.
The oops happens in dst_metrics_write_ptr()
include/net/dst.h:124: return dst->ops->cow_metrics(dst, p);
dst->ops->cow_metrics is NULL and causes the oops.
This extremely primitive (and most probably wrong) patch fixes the
problem for me:
--- include/net/dst.h 2011-04-24 23:10:15.985686594 +0200
+++ include/net/dst.h 2011-04-24 23:44:43.897686223 +0200
@@ -121,7 +121,7 @@ static inline u32 *dst_metrics_write_ptr
unsigned long p = dst->_metrics;
if (p & DST_METRICS_READ_ONLY)
- return dst->ops->cow_metrics(dst, p);
+ return dst->ops->cow_metrics ?
dst->ops->cow_metrics(dst, p) : NULL;
return __DST_METRICS_PTR(p);
}
Please tell me if you need more information!
Thanks,
Bernhard
next reply other threads:[~2011-04-24 22:37 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-24 22:37 Held Bernhard [this message]
2011-04-25 8:07 ` Oops in 2.6.39 include/net/dst.h: dst_metrics_write_ptr() running l2tp over ipsec Eric Dumazet
2011-04-25 9:52 ` Held Bernhard
2011-04-25 12:49 ` Eric Dumazet
2011-04-25 18:54 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DB4A619.9080600@gmx.de \
--to=berny156@gmx.de \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.