From mboxrd@z Thu Jan 1 00:00:00 1970 From: Russell Jones Date: Wed, 27 Apr 2011 16:03:43 +0000 Subject: [lm-sensors] w83627hf temp1/2/3 questions Message-Id: <4DB83E5F.8070701@eggycrew.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hello! I am attempting to figure out what temp1, 2, and 3 in the following output is actually showing: k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +31 C Core1 Temp: +37 C k8temp-pci-00cb Adapter: PCI adapter Core0 Temp: +28 C Core1 Temp: +33 C w83627hf-isa-0c00 Adapter: ISA adapter VCore 1: +2.00 V (min = +0.00 V, max = +4.08 V) VCore 2: +2.10 V (min = +0.00 V, max = +4.08 V) +3.3V: +3.34 V (min = +2.82 V, max = +3.79 V) +5V: +5.03 V (min = +4.09 V, max = +0.30 V) ALARM +12V: +5.78 V (min = +12.28 V, max = +5.78 V) ALARM -12V: -6.77 V (min = -0.19 V, max = -12.69 V) ALARM -5V: -3.94 V (min = +3.44 V, max = -1.88 V) ALARM V5SB: +5.62 V (min = +5.75 V, max = +4.89 V) ALARM VBat: +2.88 V (min = +2.86 V, max = +3.04 V) fan1: 0 RPM (min = 5000 RPM, div = 2) ALARM fan2: 0 RPM (min = 2689 RPM, div = 2) ALARM fan3: 0 RPM (min = 5487 RPM, div = 2) ALARM temp1: +23 C (high = +103 C, hyst = -53 C) sensor = thermistor temp2: +21.0 C (high = +80 C, hyst = +75 C) sensor = thermistor temp3: +27.5 C (high = +80 C, hyst = +75 C) sensor = thermistor vid: +0.000 V (VRM Version 2.4) alarms: beep_enable: Sound alarm enabled I have tried going through the documentation for this hardware monitor chip for what is actually being monitored with no luck (http://www.itox.com/pages/support/wdt/W83627HF.pdf) I am attempting to find the ambient/chassis temperature, and was hoping one of these three temps would be it. Any ideas? _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors