From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4DBA5F5C.9030607@domain.hid> Date: Fri, 29 Apr 2011 08:49:00 +0200 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <4DB8149A.7080600@domain.hid> <4DB83CBE.5040007@domain.hid> <4DB94BA0.1020503@domain.hid> <4DB94C9C.7080904@domain.hid> <4DB991E6.90403@domain.hid> <4DB99E47.7000904@domain.hid> <4DB9B978.2010200@domain.hid> <4DB9C0D3.4030003@domain.hid> <4DBA5E66.3000806@domain.hid> In-Reply-To: <4DBA5E66.3000806@domain.hid> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [Adeos-main] Ipipe hangs on ARM MINI2440 after switching clocksource List-Id: General discussion about Adeos List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Alexey Galakhov Cc: adeos-main@gna.org Gilles Chanteperdrix wrote: > Alexey Galakhov wrote: >> 2011/4/29 Gilles Chanteperdrix >> >>> Maybe you can try booting with MMC disabled, to see if the I-pipe is >>> working? Not permanently, just to confirm that you are not chasing the >>> wrong bug. >>> >> Sure, that's exactly what I want to do. Unfortunately, I cannot boot to a >> working system in that mode since I have root on SD card, but "Kernel panic >> - unable to mount root fs" would indicate successful boot. I think also >> about moving root somewhere else to be able to run tests ans examine /proc >> and /sys under ipipe kernel. > > Just made a rootfs for s3c, you can find it as a tar archive here: > http://xenomai.org/~gch/rootfs-s3c.tar.bz2 > > or as a cpio archive to be used as an initramfs here: > http://xenomai.org/~gch/initramfs-s3c.tar.bz2 s/.bz2/.gz/ -- Gilles.