Re: arduino IDE on beagleboard

[Robert Schuster <thebohemian@gmx.net>]

[-- Attachment #1: Type: text/plain, Size: 1479 bytes --]

Hi,

Am 03.05.2011 13:15, schrieb Koen Kooi:
> First you have to fix the included rxtx install:
> http://dominion.thruhere.net/koen/cms/making-processing-arduino-ide-replicaorg-work-on-arm
Yep, same story as on an amd64 machine. :)

>> Could you upload programs to the
>> arduino and receive stuff through the serial port?
> 
> That works, and if you download and untar:
> 
> http://dominion.thruhere.net/koen/angstrom/beagleboard/avr-binutils-2.21.tar.bz2
> http://dominion.thruhere.net/koen/angstrom/beagleboard/avr-gcc-4.5.2.tar.bz2
> http://dominion.thruhere.net/koen/angstrom/beagleboard/avr-libc-1.7.1.tar.bz2
How did you build those? Directly on a BB using gcc? I looked into
making recipes for OE for this
but my toolchain-foo is way to small for this.

> You can even compile the included examples. I succesfully compiled and
> uploaded the serial test app to the
> http://elinux.org/BeagleBoard_Trainer expansionboard attached to my xM.
> I haven't tried using it on a proper arduino board yet, but that uses
> the same bootloader as the trainer.
Great! Then I think this is going to work without problems!

Thanks for trying this out. So I am going to take a BB/PB to LinuxTag
along with an arduino starterkit ... :)

Regards,
Robert

_______________________________________________
Openembedded-devel mailing list
Openembedded-devel@lists.openembedded.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 270 bytes --]