From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.windriver.com (mail.windriver.com [147.11.1.11]) by mx1.pokylinux.org (Postfix) with ESMTP id 355E64C80FE9 for ; Tue, 3 May 2011 23:49:16 -0500 (CDT) Received: from ALA-HCA.corp.ad.wrs.com (ala-hca [147.11.189.40]) by mail.windriver.com (8.14.3/8.14.3) with ESMTP id p444nDGf022522 (version=TLSv1/SSLv3 cipher=AES128-SHA bits=128 verify=FAIL); Tue, 3 May 2011 21:49:13 -0700 (PDT) Received: from Macintosh-5.local (172.25.36.228) by ALA-HCA.corp.ad.wrs.com (147.11.189.50) with Microsoft SMTP Server id 14.1.255.0; Tue, 3 May 2011 21:49:13 -0700 Message-ID: <4DC0DAC8.8090005@windriver.com> Date: Tue, 3 May 2011 23:49:12 -0500 From: Mark Hatle Organization: Wind River Systems User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.17) Gecko/20110414 Thunderbird/3.1.10 MIME-Version: 1.0 To: Gary Thomas References: <4DC08B17.2070907@mlbassoc.com> <4DC09186.8010905@windriver.com> <4DC0AFCC.9080201@mlbassoc.com> In-Reply-To: <4DC0AFCC.9080201@mlbassoc.com> Cc: poky@yoctoproject.org Subject: Re: Zypper question X-BeenThere: poky@yoctoproject.org X-Mailman-Version: 2.1.13 Precedence: list List-Id: Poky build system developer discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 04 May 2011 04:49:17 -0000 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit On 5/3/11 8:45 PM, Gary Thomas wrote: > On 05/03/2011 05:36 PM, Mark Hatle wrote: >> On 5/3/11 6:09 PM, Gary Thomas wrote: >>> I'm trying to set up zypper on a qemu based system. I've built >>> the image& additional packages in 192.168.1.125:/local/qemu_test/tmp/deploy/rpm/ >>> This system is running lighttpd and has the path http://192.168.1.125/qemu-repo >>> set to that path. I verified it by fetching http://192.168.1.125/qemu-repo/solvedb.conf >>> which shows up as >>> /local/qemu_test/tmp/deploy/rpm/qemux86/solvedb >>> /local/qemu_test/tmp/deploy/rpm/i586/solvedb >>> /local/qemu_test/tmp/deploy/rpm/all/solvedb >>> >>> On the QEMU system, I ran >>> # zypper addrepo http://192.168.1.125/qemu-repo yocto >>> # zypper refresh >>> No errors were reported >>> >>> When I tried to install a package, I got this: >>> # zypper install gst-plugins-base >>> Error building the cache. >>> [1] Repository type can't be determined. >>> warning: Disabling repository 'yocto' because of the above error. >>> >>> What am I doing wrong? >>> >>> Note: I tried to follow https://wiki.pokylinux.org/wiki/Zypper_Repository_Setup >>> Can I help with this (edit the page, etc)? If so, how do I get a login? >>> >> >> This is odd. I didn't experience these issues when I was doing the development >> / testing. >> >>> From the above there is an "Error building the cache." the only caching steps >> that occur during an install is a sync of the system's RPM cache. If something >> is wrong there you can get a similar error. >> >> Try simply running "rpm -qa" and make sure you get reasonable output. If not, >> then RPM isn't installed properly. (By default on a minimal system, the RPM >> database is removed after the rootfs is populated.) > > 'rpm -qa ' worked just fine. > > I started with core-image-sato, so it's a pretty complete system to start. > > Do I have the repo stuff set up correctly? I can see from the lighttpd logs > that it seems to be looking for files I don't have: > 192.168.7.2 192.168.1.125 - [03/May/2011:16:57:38 -0600] "HEAD /qemu-repo/repodata/repomd.xml HTTP/1.1" 404 0 "-" "ZYpp 8.11.0 (curl 7.21.2)" > 192.168.7.2 192.168.1.125 - [03/May/2011:16:57:38 -0600] "HEAD /qemu-repo/content HTTP/1.1" 404 0 "-" "ZYpp 8.11.0 (curl 7.21.2)" > Neither of these files seems to be in tmp/deploy/rpm > > Did I miss a step? I ran 'bitbake package-index' just in case. > > did you run createrepo on the /local/qemu_test/tmp/deploy/rpm directory? (step 4 in the wiki page) I usually run createrepo -- but apparently it works if you are in the same directory... --Mark