On 05/04/2011 06:04 PM, rajeshkumar s.a wrote: > rules > ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1412", > ENV{OFONO_IFACE_NUM}=="00", ENV{OFONO_HUAWEI_TYPE}="Modem" > ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1412", > ENV{OFONO_IFACE_NUM}=="02", ENV{OFONO_HUAWEI_TYPE}="Pcui" > ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1412", > ENV{OFONO_IFACE_NUM}=="04", ENV{OFONO_HUAWEI_TYPE}="gps" > ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1412", > ENV{OFONO_IFACE_NUM}=="05", ENV{OFONO_HUAWEI_TYPE}="pcvoice" > > lsusb > Bus 003 Device 002: ID 12d1:1412 Huawei Technologies Co., Ltd. > > rajesh > > On Wed, May 4, 2011 at 9:31 PM, rajeshkumar s.a > > wrote: > > How do I get the proper ofono_interface_num ? (n00b ques) > > rajesh > > > On Wed, May 4, 2011 at 9:26 PM, Olivier Guiter > > wrote: > > On 05/04/2011 05:35 PM, rajeshkumar s.a wrote: >> PFA, the debug log with AT commands >> >> I am still getting a timeout on enable-modem operation >> >> and list-modem gives following o/p >> >> $ ./list-modems >> [ /huawei0 ] >> Features = >> Emergency = 0 >> Powered = 0 >> Lockdown = 0 >> Interfaces = >> Online = 0 >> >> Regards, >> Rajesh >> > As far i can see, ofono communicates using the wrong USB > interface .... I suggest you to modify the > //etc/udev/rules.d/ofono.rules///to use the correct one > First, get the idvendor and id product of your key (e.g: lsusb) > Then check in the ofono.rules a line like this one: > |ATTRS{idVendor}=="19d2", > ATTRS{idProduct}=="0121",ENV{OFONO_IFACE_NUM}=="04", > ENV{OFONO_ZTE_TYPE}="modem" > |And update the OFONO_IFACE_NUM > These keys publish multiple interfaces with different purposes > (like modem diag, traces, etc...) > Hope this help > Olivier > > > > It is modem specific...so i don't know :( ... you must test ... Olivier