[U-Boot] [PATCH v3 0/8] keymile arm boards update, part 2

[Valentin Longchamp <valentin.longchamp@keymile.com>]

Hi Prafulla,

Valentin Longchamp wrote:
> This series is the second effort of merging the Keymile boards support
> back into mainline.
> 
> This series is a subset of the first patch series:
> http://lists.denx.de/pipermail/u-boot/2011-April/090013.html
> The first large series was split up to three independent series, which
> are easier to review and apply for the custodians.
> 
> This series adds the km_arm specific parts of the series. All its changes
> concern our marvell based boards and that's why it should go through the
> u-boot-marvell git tree.
> 
> Changes for v3: taken Prafulla's comments into account

I have posted those one week ago, and I was wondering if you would be able to review/take them in you tree soon ?

Best Regards

Valentin

> 
> Holger Brunck (2):
>   arm/km: add second serial interface for kirkwood
>   arm/km: update mgcoge3un board support
> 
> Valentin Longchamp (6):
>   arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h
>   arm/km: move CONFIG_EXTRA_ENV_SETTINGS from board to km_arm file
>   arm/km: introduce bootcount env variable and clean km_arm
>   arm/km: disable ls (through jffs2 support)
>   arm/km: rename mgcoge2un to mgcoge3un
>   mvgbe: enable configurability of PORT_SERIAL_CONTROL_VALUE
> 
>  MAINTAINERS                                  |    6 +-
>  board/keymile/km_arm/km_arm.c                |  108 +++++++++++----
>  board/keymile/km_arm/kwbimage-memphis.cfg    |  197 ++++++++++++++++++++++++++
>  boards.cfg                                   |    2 +-
>  drivers/net/mvgbe.h                          |    2 +
>  include/configs/keymile-common.h             |    9 --
>  include/configs/km_arm.h                     |   25 ++++
>  include/configs/{mgcoge2un.h => mgcoge3un.h} |   49 ++++---
>  include/configs/suen3.h                      |   15 --
>  include/configs/suen8.h                      |   15 --
>  10 files changed, 340 insertions(+), 88 deletions(-)
>  create mode 100644 board/keymile/km_arm/kwbimage-memphis.cfg
>  rename include/configs/{mgcoge2un.h => mgcoge3un.h} (56%)
> 


-- 
Valentin Longchamp
Embedded Software Engineer
Hardware and Chip Integration
______________________________________ 
KEYMILE AG 
Schwarzenburgstr. 73
CH-3097 Liebefeld
Phone +41 31 377 1318 
Fax   +41 31 377 1212 
valentin.longchamp at keymile.com
www.keymile.com 
______________________________________ 
KEYMILE: A Specialist as a Partner