From: Jeff Rickman <jrickman@myamigos.us>
To: lm-sensors@vger.kernel.org
Subject: Re: [lm-sensors] Will there ever be EMC6w201 support?
Date: Fri, 13 May 2011 17:47:07 +0000 [thread overview]
Message-ID: <4DCD6E9B.7020700@myamigos.us> (raw)
In-Reply-To: <20110414034609.476411A9866@localhost.localdomain>
[-- Attachment #1: Type: text/plain, Size: 1681 bytes --]
On 5/13/2011 11:44 AM, Jean Delvare wrote:
> On Fri, 13 May 2011 09:42:28 -0600, Harry G McGavran Jr wrote:
>> This new i8k seems to work on my system.
>>
>> =========================================
>>
>> XX% /usr/bin/sensors
>> i8k-virtual-0
>> Adapter: Virtual device
>> Left Fan: 64650 RPM
>> Right Fan: 48390 RPM
>
> As said before, you'd need option fan_mult=1 to get proper readings.
> But well, in the long run I guess you'll stop using i8k anyway, as it
> provides fewer values than the emc6w201 driver.
>
>> emc6w201-i2c-0-2e
>> Adapter: SMBus I801 adapter at e8a0
>> Aux: +1.82 V (min = +1.64 V, max = +1.98 V)
>> CPU VCore: +1.26 V (min = +0.78 V, max = +1.70 V)
>> +3.3V: +3.33 V (min = +3.08 V, max = +3.52 V)
>> +5V: +5.10 V (min = +4.66 V, max = +5.34 V)
>> +12V: +12.06 V (min = +0.81 V, max = +12.81 V)
>> Chassis: 1613 RPM (min = 300 RPM)
>> CPU: 2153 RPM (min = 200 RPM)
>> CPU: +54.0 C (low = -127.0 C, high = +88.0 C)
>> Remote Diode 5: +48.0 C (low = -127.0 C, high = +75.0 C)
>> Mainboard: +44.0 C (low = -127.0 C, high = +80.0 C)
>>
>> ===============================================
>>
>> The only entry in syslog as a result of the above is:
>>
>> May 13 09:37:40 kahu kernel: [167232.194108] i8k: unable to get SMM BIOS
>> version
>>
>> but that has occurred with all the i8k's I've tried.
>
> Looks very promising. Now let's wait for Jeff's report.
>
I have promising results; no crash messages. "sensors" out that shows
N/A. See attached.
I still need to use the "force" option or else I get the "no such
device" error message. See attached.
[-- Attachment #2: Dell_Sensors_Testing_6.txt --]
[-- Type: text/plain, Size: 973 bytes --]
# modprobe -v i8k
insmod /lib/modules/2.6.35.12-90.fc14.x86_64/kernel/drivers/char/i8k.ko
FATAL: Error inserting i8k (/lib/modules/2.6.35.12-90.fc14.x86_64/kernel/drivers/char/i8k.ko): No such device
# tail /var/log/messages
May 13 12:38:52 XX kernel: [ 88.685362] i8k: unable to get SMM Dell signature
# modprobe -v i8k force
insmod /lib/modules/2.6.35.12-90.fc14.x86_64/kernel/drivers/char/i8k.ko force
# tail /var/log/messages
May 13 12:38:52 XX kernel: [ 88.685362] i8k: unable to get SMM Dell signature
May 13 12:39:12 XX kernel: [ 108.804152] i8k: unable to get SMM Dell signature
May 13 12:39:12 XX kernel: [ 108.805114] i8k: unable to get SMM BIOS version
May 13 12:39:12 XX kernel: [ 108.816693] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
# sensors
i8k-virtual-0
Adapter: Virtual device
Left Fan: N/A
Right Fan: N/A
No further messages in Syslog. No error messages related to running "sensors" command.
[-- Attachment #3: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next prev parent reply other threads:[~2011-05-13 17:47 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-14 3:46 [lm-sensors] Will there ever be EMC6w201 support? Harry G McGavran Jr
2011-04-14 7:57 ` Jean Delvare
2011-04-14 15:19 ` Harry G McGavran Jr
2011-04-14 15:24 ` Harry G McGavran Jr
2011-04-15 15:25 ` Harry G McGavran Jr
2011-05-05 10:10 ` Jean Delvare
2011-05-05 15:16 ` Harry G McGavran Jr
2011-05-05 16:30 ` Jean Delvare
2011-05-05 16:40 ` Harry G McGavran Jr
2011-05-06 15:24 ` Jeff Rickman
2011-05-07 7:46 ` Jean Delvare
2011-05-07 7:49 ` Jean Delvare
2011-05-07 11:47 ` Jean Delvare
2011-05-07 16:23 ` Harry G McGavran Jr
2011-05-07 16:26 ` Harry G McGavran Jr
2011-05-08 0:05 ` Harry G McGavran Jr
2011-05-08 4:09 ` Jeff Rickman
2011-05-08 6:27 ` Jean Delvare
2011-05-08 8:39 ` Hans de Goede
2011-05-08 9:18 ` Jean Delvare
2011-05-08 9:25 ` Jean Delvare
2011-05-08 11:19 ` Jeff Rickman
2011-05-08 12:29 ` Jean Delvare
2011-05-08 12:40 ` Jeff Rickman
2011-05-08 15:27 ` Harry G McGavran Jr
2011-05-09 3:32 ` Jeff Rickman
2011-05-09 19:42 ` Jean Delvare
2011-05-09 19:50 ` Harry G McGavran Jr
2011-05-09 20:07 ` Jean Delvare
2011-05-09 20:21 ` Harry G McGavran Jr
2011-05-09 20:24 ` Guenter Roeck
2011-05-09 21:06 ` Harry G McGavran Jr
2011-05-10 13:54 ` Jeff Rickman
2011-05-10 14:06 ` Jeff Rickman
2011-05-10 14:08 ` Jeff Rickman
2011-05-10 14:24 ` Jean Delvare
2011-05-10 15:05 ` Jeff Rickman
2011-05-11 12:43 ` Luca Tettamanti
2011-05-11 13:48 ` Luca Tettamanti
2011-05-11 14:15 ` Jean Delvare
2011-05-11 14:28 ` Luca Tettamanti
2011-05-11 15:08 ` Jean Delvare
2011-05-11 17:15 ` Harry G McGavran Jr
2011-05-11 17:23 ` Jeff Rickman
2011-05-11 17:59 ` Jeff Rickman
2011-05-11 19:03 ` Jean Delvare
2011-05-12 13:02 ` Luca Tettamanti
2011-05-12 13:38 ` Jean Delvare
2011-05-12 13:47 ` Jean Delvare
2011-05-12 13:49 ` Luca Tettamanti
2011-05-12 15:18 ` Harry G McGavran Jr
2011-05-12 16:00 ` Jean Delvare
2011-05-12 16:11 ` Harry G McGavran Jr
2011-05-12 20:37 ` Jeff Rickman
2011-05-12 23:49 ` Harry G McGavran Jr
2011-05-13 12:48 ` Luca Tettamanti
2011-05-13 15:01 ` Jean Delvare
2011-05-13 15:42 ` Harry G McGavran Jr
2011-05-13 16:44 ` Jean Delvare
2011-05-13 17:28 ` Harry G McGavran Jr
2011-05-13 17:47 ` Jeff Rickman [this message]
2011-05-13 19:36 ` Jean Delvare
2011-05-13 19:47 ` Harry G McGavran Jr
2011-05-13 21:10 ` Jean Delvare
2011-05-13 22:55 ` Harry G McGavran Jr
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DCD6E9B.7020700@myamigos.us \
--to=jrickman@myamigos.us \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.