All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Lord <kernel@teksavvy.com>
To: IDE/ATA development list <linux-ide@vger.kernel.org>
Subject: WD20EARS: finally reporting 4KByte sector size!
Date: Sun, 15 May 2011 23:54:53 -0400	[thread overview]
Message-ID: <4DD0A00D.3030104@teksavvy.com> (raw)

I picked up my third WD 2TB "Green" drive today,
and lo and behold.. the firmware (51.0AB51) actually
reports the real physical sector size (finally!).

TA device, with non-removable media

        Model Number:       WDC WD20EARS-60MVWB0

        Serial Number:      WD-WCAZA4297731

        Firmware Revision:  51.0AB51

        Transport:          Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5,
SATA Rev 2.6
Standards:

        Supported: 8 7 6 5

        Likely used: 8

Configuration:

        Logical         max     current

        cylinders       16383   16383

        heads           16      16

        sectors/track   63      63

        --

        CHS current addressable sectors:   16514064
        LBA    user addressable sectors:  268435455
        LBA48  user addressable sectors: 3907029168
        Logical  Sector size:                   512 bytes
        Physical Sector size:                  4096 bytes
        Logical Sector-0 offset:                  0 bytes
        device size with M = 1024*1024:     1907729 MBytes
        device size with M = 1000*1000:     2000398 MBytes (2000 GB)
        cache/buffer size  = unknown
        Form Factor: 3.5 inch
Capabilities:
        LBA, IORDY(can be disabled)
        Standby timer values: spec'd by Standard, with device specific minimum
        R/W multiple sector transfer: Max = 16  Current = 0
        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4
             Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
        Enabled Supported:
           *    SMART feature set
                Security Mode feature set
           *    Power Management feature set
           *    Write cache
           *    Look-ahead
           *    WRITE_BUFFER command
           *    READ_BUFFER command
           *    NOP cmd
           *    DOWNLOAD_MICROCODE
           *    48-bit Address feature set
           *    Device Configuration Overlay feature set
           *    Mandatory FLUSH_CACHE
           *    FLUSH_CACHE_EXT
           *    SMART error logging
           *    SMART self-test
           *    General Purpose Logging feature set
           *    64-bit World wide name
           *    WRITE_UNCORRECTABLE_EXT command
           *    {READ,WRITE}_DMA_EXT_GPL commands
           *    Segmented DOWNLOAD_MICROCODE
           *    Gen1 signaling speed (1.5Gb/s)
           *    Gen2 signaling speed (3.0Gb/s)
           *    SMART Command Transport (SCT) feature set
           *    SCT LBA Segment Access (AC2)
           *    SCT Error Recovery Control (AC3)
           *    SCT Features Control (AC4)
           *    SCT Data Tables (AC5)
                unknown 206[12] (vendor specific)
                unknown 206[13] (vendor specific)
Security:
        Master password revision code = 65534
                supported
        not     enabled
        not     locked
        not     frozen
        not     expired: security count
                supported: enhanced erase
        384min for SECURITY ERASE UNIT. 384min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50014ee2b031c1d4
        NAA             : 5
        IEEE OUI        : 0014ee
        Unique ID       : 2b031c1d4
Integrity word not set (found 0x0000, expected 0x73a5)

             reply	other threads:[~2011-05-16  3:54 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-16  3:54 Mark Lord [this message]
2011-05-16 18:27 ` WD20EARS: finally reporting 4KByte sector size! Bjørn Mork
2011-05-18 19:13   ` Mark Lord
2011-05-18 22:43 ` Stan Hoeppner
2011-05-18 23:19   ` Mark Lord

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4DD0A00D.3030104@teksavvy.com \
    --to=kernel@teksavvy.com \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.