From: "Alfredo Jesús Delaiti" <alfredodelaiti@netscape.net>
To: unlisted-recipients:; (no To-header on input)@casper.infradead.org
Cc: linux-media@vger.kernel.org
Subject: Re: Help to make a driver. ISDB-Tb
Date: Mon, 16 May 2011 20:42:23 -0300 [thread overview]
Message-ID: <4DD1B65F.8020902@netscape.net> (raw)
In-Reply-To: <4DC179F6.1020905@netscape.net>
Hi
>
> Digital television: not tune any channels with w-scan or gnome-dvb-setup.
> But with the latter, it captures 2 weak signals, but I can not know
> which is.
> Under windows also capture 2 channel and I'm in a place where the
> signal is low.
> I'll try to have more signal strength.
>
> If I run dmesg after scan channels I get the following:
>
> [ 3474.858537] mb86a20s: mb86a20s_set_frontend:
> [ 3474.858541] mb86a20s: mb86a20s_set_frontend: Calling tuner set
> parameters
> [ 3474.981157] mb86a20s: mb86a20s_read_status:
> [ 3474.981649] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01
I improved the antenna signal and I've got this:
alfredo@linux:~> mplayer -dumpstream dvb://'C5N HD' -dumpfile
mplayer-dumpfile.ts
MPlayer dev-SVN-r33321-4.5-openSUSE Linux 11.4 (x86_64)-Packman (C)
2000-2011 MPlayer Team
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
mplayer: could not open config files /home/alfredo/.lircrc and
/etc/lirc/lircrc
mplayer: No such file or directory
Failed to read LIRC config file ~/.lircrc.
Loading extension-related profile 'vo.vdpau'
Playing dvb://C5N HD.
dvb_tune Freq: 551142857
dvb_streaming_read, attempt N. 6 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 5 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 4 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 3 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 2 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 1 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, return 0 bytes
dvb_streaming_read, attempt N. 6 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 5 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 4 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 3 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 2 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 1 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, return 0 bytes
Core dumped ;)
Exiting... (End of file)
dmesg
[11359.790188] cx23885[0]/0: restarting queue
[11359.790197] cx23885[0]/0: queue is empty - first active
[11359.790202] cx23885[0]/0: cx23885_start_dma() w: 752, h: 32, f: 2
[11359.790209] cx23885[0]/0: cx23885_sram_channel_setup() Configuring
channel [TS1 B]
[11359.790423] cx23885[0]/0: cx23885_start_dma() enabling TS int's and DMA
[11359.790436] cx23885[0]/0: [ffff880058342e00/0] cx23885_buf_queue -
first active
[11359.790441] cx23885[0]/0: queue is not empty - append to active
[11359.790445] cx23885[0]/0: [ffff88002d4fba00/1] cx23885_buf_queue -
append to active
[11359.790449] cx23885[0]/0: queue is not empty - append to active
[11359.790453] cx23885[0]/0: [ffff88003758ae00/2] cx23885_buf_queue -
append to active
[11359.790457] cx23885[0]/0: queue is not empty - append to active
[11359.790460] cx23885[0]/0: [ffff88005815f800/3] cx23885_buf_queue -
append to active
[11359.790464] cx23885[0]/0: queue is not empty - append to active
[11359.790468] cx23885[0]/0: [ffff88003758ac00/4] cx23885_buf_queue -
append to active
[11359.790472] cx23885[0]/0: queue is not empty - append to active
[11359.790476] cx23885[0]/0: [ffff88005ae15600/5] cx23885_buf_queue -
append to active
[11359.790480] cx23885[0]/0: queue is not empty - append to active
[11359.790484] cx23885[0]/0: [ffff88005ae15000/6] cx23885_buf_queue -
append to active
[11359.790488] cx23885[0]/0: queue is not empty - append to active
[11359.790492] cx23885[0]/0: [ffff88005ae15400/7] cx23885_buf_queue -
append to active
[11359.790496] cx23885[0]/0: queue is not empty - append to active
[11359.790499] cx23885[0]/0: [ffff88005a0ce000/8] cx23885_buf_queue -
append to active
[11359.790503] cx23885[0]/0: queue is not empty - append to active
[11359.790507] cx23885[0]/0: [ffff88005a0cea00/9] cx23885_buf_queue -
append to active
[11359.790511] cx23885[0]/0: queue is not empty - append to active
[11359.790515] cx23885[0]/0: [ffff88005a0cee00/10] cx23885_buf_queue -
append to active
[11359.790519] cx23885[0]/0: queue is not empty - append to active
[11359.790523] cx23885[0]/0: [ffff8800374ffe00/11] cx23885_buf_queue -
append to active
[11359.790527] cx23885[0]/0: queue is not empty - append to active
[11359.790531] cx23885[0]/0: [ffff8800582a0c00/12] cx23885_buf_queue -
append to active
[11359.790535] cx23885[0]/0: queue is not empty - append to active
[11359.790539] cx23885[0]/0: [ffff8800582a0600/13] cx23885_buf_queue -
append to active
[11359.790543] cx23885[0]/0: queue is not empty - append to active
[11359.790547] cx23885[0]/0: [ffff8800582a0000/14] cx23885_buf_queue -
append to active
[11359.790551] cx23885[0]/0: queue is not empty - append to active
[11359.790554] cx23885[0]/0: [ffff8800582a0a00/15] cx23885_buf_queue -
append to active
[11359.790558] cx23885[0]/0: queue is not empty - append to active
[11359.790562] cx23885[0]/0: [ffff8800582a0200/16] cx23885_buf_queue -
append to active
[11359.790566] cx23885[0]/0: queue is not empty - append to active
[11359.790570] cx23885[0]/0: [ffff8800582a0800/17] cx23885_buf_queue -
append to active
[11359.790578] cx23885[0]/0: queue is not empty - append to active
[11359.790582] cx23885[0]/0: [ffff88005ae14400/18] cx23885_buf_queue -
append to active
[11359.790586] cx23885[0]/0: queue is not empty - append to active
[11359.790590] cx23885[0]/0: [ffff88005ae14e00/19] cx23885_buf_queue -
append to active
[11359.790594] cx23885[0]/0: queue is not empty - append to active
[11359.790598] cx23885[0]/0: [ffff88005ae14600/20] cx23885_buf_queue -
append to active
[11359.790602] cx23885[0]/0: queue is not empty - append to active
[11359.790605] cx23885[0]/0: [ffff88005ae14c00/21] cx23885_buf_queue -
append to active
[11359.790609] cx23885[0]/0: queue is not empty - append to active
[11359.790613] cx23885[0]/0: [ffff88005ae14a00/22] cx23885_buf_queue -
append to active
[11359.790617] cx23885[0]/0: queue is not empty - append to active
[11359.790621] cx23885[0]/0: [ffff88005ae14000/23] cx23885_buf_queue -
append to active
[11359.790625] cx23885[0]/0: queue is not empty - append to active
[11359.790629] cx23885[0]/0: [ffff880037511a00/24] cx23885_buf_queue -
append to active
[11359.790633] cx23885[0]/0: queue is not empty - append to active
[11359.790637] cx23885[0]/0: [ffff880037511c00/25] cx23885_buf_queue -
append to active
[11359.790641] cx23885[0]/0: queue is not empty - append to active
[11359.790645] cx23885[0]/0: [ffff880037511e00/26] cx23885_buf_queue -
append to active
[11359.790649] cx23885[0]/0: queue is not empty - append to active
[11359.790652] cx23885[0]/0: [ffff880037683c00/27] cx23885_buf_queue -
append to active
[11359.790656] cx23885[0]/0: queue is not empty - append to active
[11359.790660] cx23885[0]/0: [ffff880037683800/28] cx23885_buf_queue -
append to active
[11359.790664] cx23885[0]/0: queue is not empty - append to active
[11359.790668] cx23885[0]/0: [ffff880037683000/29] cx23885_buf_queue -
append to active
[11359.790672] cx23885[0]/0: queue is not empty - append to active
[11359.790676] cx23885[0]/0: [ffff880037683e00/30] cx23885_buf_queue -
append to active
[11359.790680] cx23885[0]/0: queue is not empty - append to active
[11359.790684] cx23885[0]/0: [ffff880037748400/31] cx23885_buf_queue -
append to active
[11360.064047] mb86a20s: mb86a20s_read_status:
[11360.064533] mb86a20s: mb86a20s_read_status: val = 4, status = 0x03
[11360.064541] mb86a20s: mb86a20s_set_frontend:
[11360.064544] mb86a20s: mb86a20s_set_frontend: Calling tuner set parameters
[11360.490076] mb86a20s: mb86a20s_read_status:
[11360.490562] mb86a20s: mb86a20s_read_status: val = 5, status = 0x07
[11360.490571] mb86a20s: mb86a20s_set_frontend:
[11360.490574] mb86a20s: mb86a20s_set_frontend: Calling tuner set parameters
[11360.792038] cx23885[0]/0: cx23885_timeout()
[11360.792045] cx23885[0]/0: cx23885_stop_dma()
[11360.792058] cx23885[0]/0: [ffff880058342e00/0] timeout - dma=0x03bbf000
[11360.792063] cx23885[0]/0: [ffff88002d4fba00/1] timeout - dma=0x02ec9000
[11360.792068] cx23885[0]/0: [ffff88003758ae00/2] timeout - dma=0x02ec7000
[11360.792072] cx23885[0]/0: [ffff88005815f800/3] timeout - dma=0x18792000
[11360.792076] cx23885[0]/0: [ffff88003758ac00/4] timeout - dma=0x038b2000
[11360.792081] cx23885[0]/0: [ffff88005ae15600/5] timeout - dma=0x02eb1000
[11360.792085] cx23885[0]/0: [ffff88005ae15000/6] timeout - dma=0x03a4b000
[11360.792089] cx23885[0]/0: [ffff88005ae15400/7] timeout - dma=0x18510000
[11360.792094] cx23885[0]/0: [ffff88005a0ce000/8] timeout - dma=0x02ee5000
[11360.792098] cx23885[0]/0: [ffff88005a0cea00/9] timeout - dma=0x02ee1000
[11360.792103] cx23885[0]/0: [ffff88005a0cee00/10] timeout - dma=0x09dc5000
[11360.792107] cx23885[0]/0: [ffff8800374ffe00/11] timeout - dma=0x594a5000
[11360.792112] cx23885[0]/0: [ffff8800582a0c00/12] timeout - dma=0x1a04b000
[11360.792116] cx23885[0]/0: [ffff8800582a0600/13] timeout - dma=0x19dcc000
[11360.792121] cx23885[0]/0: [ffff8800582a0000/14] timeout - dma=0x19d17000
[11360.792125] cx23885[0]/0: [ffff8800582a0a00/15] timeout - dma=0x02ef3000
[11360.792129] cx23885[0]/0: [ffff8800582a0200/16] timeout - dma=0x02ee9000
[11360.792134] cx23885[0]/0: [ffff8800582a0800/17] timeout - dma=0x03b7f000
[11360.792138] cx23885[0]/0: [ffff88005ae14400/18] timeout - dma=0x02c8f000
[11360.792143] cx23885[0]/0: [ffff88005ae14e00/19] timeout - dma=0x02c93000
[11360.792147] cx23885[0]/0: [ffff88005ae14600/20] timeout - dma=0x02c9b000
[11360.792151] cx23885[0]/0: [ffff88005ae14c00/21] timeout - dma=0x02ca3000
[11360.792156] cx23885[0]/0: [ffff88005ae14a00/22] timeout - dma=0x02cab000
[11360.792160] cx23885[0]/0: [ffff88005ae14000/23] timeout - dma=0x02cb3000
[11360.792164] cx23885[0]/0: [ffff880037511a00/24] timeout - dma=0x02cbb000
[11360.792169] cx23885[0]/0: [ffff880037511c00/25] timeout - dma=0x02cc3000
[11360.792173] cx23885[0]/0: [ffff880037511e00/26] timeout - dma=0x02ccb000
[11360.792177] cx23885[0]/0: [ffff880037683c00/27] timeout - dma=0x02cd3000
[11360.792182] cx23885[0]/0: [ffff880037683800/28] timeout - dma=0x02cdb000
[11360.792186] cx23885[0]/0: [ffff880037683000/29] timeout - dma=0x02ce3000
[11360.792191] cx23885[0]/0: [ffff880037683e00/30] timeout - dma=0x02ceb000
[11360.792195] cx23885[0]/0: [ffff880037748400/31] timeout - dma=0x02cf4000
[11360.792198] cx23885[0]/0: restarting queue
As there is little sign, I asked another person to try and got this:
$femon -H
FE: Fujitsu mb86A20s (DVBT)
Problem retrieving frontend information: Operation not supported
status SCVYL | signal 6% | snr 71% | ber -1217255176 | unc -1217744071 |
FE_HAS_LOCK
Problem retrieving frontend information: Operation not supported
status SCVYL | signal 12% | snr 71% | ber -1217255176 | unc -1217744071
| FE_HAS_LOCK
Problem retrieving frontend information: Operation not supported
status SCVYL | signal 12% | snr 71% | ber -1217255176 | unc -1217744071
| FE_HAS_LOCK
and this:
[ 397.962795] mb86a20s: mb86a20s_read_status: val = 9, status = 0x1f
[ 397.962798] mb86a20s: mb86a20s_read_signal_strength:
[ 397.983108] mb86a20s: mb86a20s_read_signal_strength: signal strength =
4096
[ 398.019975] mb86a20s: mb86a20s_read_status:
[ 398.020461] mb86a20s: mb86a20s_read_status: val = 9, status = 0x1f
I think these values would have to watch TV, but no.
Suggestions are welcome
Thanks in advance
Alfredo
--
Dona tu voz
http://www.voxforge.org/es
prev parent reply other threads:[~2011-05-16 23:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-30 17:09 Help to make a driver. ISDB-Tb Alfredo Jesús Delaiti
2011-05-01 1:18 ` Mauro Carvalho Chehab
2011-05-02 1:57 ` Alfredo Jesús Delaiti
2011-05-02 13:06 ` Mauro Carvalho Chehab
2011-05-04 16:08 ` Alfredo Jesús Delaiti
2011-05-16 23:42 ` Alfredo Jesús Delaiti [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DD1B65F.8020902@netscape.net \
--to=alfredodelaiti@netscape.net \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.