All of lore.kernel.org
 help / color / mirror / Atom feed
From: Saul Wold <sgw@linux.intel.com>
To: Patches and discussions about the oe-core layer
	<openembedded-core@lists.openembedded.org>
Subject: Re: [PATCH 1/1][RFC][v3] package-index.bb: add support for	rpm and deb.
Date: Fri, 20 May 2011 08:11:30 -0700	[thread overview]
Message-ID: <4DD684A2.6020904@linux.intel.com> (raw)
In-Reply-To: <453ff1af4dd55d6542f72cc8c1d017d6a1b033b1.1305722976.git.dexuan.cui@intel.com>

On 05/18/2011 06:10 AM, Dexuan Cui wrote:
> From: Dexuan Cui<dexuan.cui@intel.com>
>
> [YOCTO #1024]
> Currently package-index.bb only supports ipk. This commit adds the support
> for rpm and deb, too.
>
> ------------------------------
> How to generate and use repos:
>
> 1) run "bitbake package-index" after building some target,
> e.g., core-image-sato-sdk;
>
> 2) export ${DEPLOY_DIR_RPM}, ${DEPLOY_DIR_IPK} and ${DEPLOY_DIR_DEB} by a
> webserver on the host, assuming the host IP is 192.168.7.1, at
> http://192.168.7.1/rpm
> http://192.168.7.1/ipk
> http://192.168.7.1/deb
>
> 3) inside the target, according to the packaging system (rpm, ipk or deb) used
> when we generate the target image, we can use different ways to manage
> packages:
>
> 3.1) RPM
>      run "zypper addrepo http://192.168.7.1/rpm main; zypper refresh"
>      to retrieve info about the repo; next, we can use "zypper install/remove"
>      to manage packages.
>
> 3.2) IPK
>      add the repo info into opkg config file, i.e., in
>      /etc/opkg/arch.conf, we can add something like
>      "src i586 http://192.168.7.1/ipk/i586", and next, we run "opkg update" to
>      make opkg update the list of available packages. And later, we can use
>      "opkg install/remove" to manage packages.
>
> 3.3) DEB
>      Currently in target, some important config files, like
> /var/lib/dpkg/status and /etc/apt/sources.list, for deb/apt are missing. So
> we can't install/remove package in target at present.
>
> Signed-off-by: Dexuan Cui<dexuan.cui@intel.com>
> ---
>   meta/classes/package_deb.bbclass        |    9 +++++++++
>   meta/classes/package_ipk.bbclass        |    9 +++++++++
>   meta/classes/package_rpm.bbclass        |    9 +++++++++
>   meta/recipes-core/meta/package-index.bb |    6 ++----
>   4 files changed, 29 insertions(+), 4 deletions(-)
>
> diff --git a/meta/classes/package_deb.bbclass b/meta/classes/package_deb.bbclass
> index 4faeb4a..f9ef32c 100644
> --- a/meta/classes/package_deb.bbclass
> +++ b/meta/classes/package_deb.bbclass
> @@ -431,3 +431,12 @@ python do_package_write_deb () {
>   do_package_write_deb[dirs] = "${PKGWRITEDIRDEB}"
>   addtask package_write_deb before do_package_write after do_package
>
> +
> +PACKAGEINDEXES += "package_index_deb;"
> +PACKAGEINDEXDEPS += "dpkg-native:do_populate_sysroot"
> +PACKAGEINDEXDEPS += "apt-native:do_populate_sysroot"
> +
> +package_index_deb() {
> +    package_update_index_deb
> +}
> +
> diff --git a/meta/classes/package_ipk.bbclass b/meta/classes/package_ipk.bbclass
> index 3c2472b..97de17a 100644
> --- a/meta/classes/package_ipk.bbclass
> +++ b/meta/classes/package_ipk.bbclass
> @@ -386,3 +386,12 @@ python do_package_write_ipk () {
>   }
>   do_package_write_ipk[dirs] = "${PKGWRITEDIRIPK}"
>   addtask package_write_ipk before do_package_write after do_package
> +
> +PACKAGEINDEXES += "package_index_ipk;"
> +PACKAGEINDEXDEPS += "opkg-utils-native:do_populate_sysroot"
> +PACKAGEINDEXDEPS += "opkg-native:do_populate_sysroot"
> +
> +package_index_ipk() {
> +    package_update_index_ipk
> +}
> +
> diff --git a/meta/classes/package_rpm.bbclass b/meta/classes/package_rpm.bbclass
> index 1cf9f79..390d17c 100644
> --- a/meta/classes/package_rpm.bbclass
> +++ b/meta/classes/package_rpm.bbclass
> @@ -815,3 +815,12 @@ python do_package_write_rpm () {
>   do_package_write_rpm[dirs] = "${PKGWRITEDIRRPM}"
>   addtask package_write_rpm before do_package_write after do_package
>
> +PACKAGEINDEXES += "package_index_rpm;"
> +PACKAGEINDEXDEPS += "rpm-native:do_populate_sysroot"
> +PACKAGEINDEXDEPS += "createrepo-native:do_populate_sysroot"
> +
> +package_index_rpm() {
> +    package_update_index_rpm
> +    createrepo "${DEPLOY_DIR_RPM}"
> +}
> +
> diff --git a/meta/recipes-core/meta/package-index.bb b/meta/recipes-core/meta/package-index.bb
> index 3c642cb..bf3922f 100644
> --- a/meta/recipes-core/meta/package-index.bb
> +++ b/meta/recipes-core/meta/package-index.bb
> @@ -19,13 +19,11 @@ do_package_write_deb[noexec] = "1"
>   do_populate_sysroot[noexec] = "1"
>
>   do_package_index[nostamp] = "1"
> -do_package_index[dirs] = "${DEPLOY_DIR_IPK}"
> -do_package_index[depends] += "opkg-utils-native:do_populate_sysroot"
> -do_package_index[depends] += "opkg-native:do_populate_sysroot"
> +do_package_index[depends] += "${PACKAGEINDEXDEPS}"
>
>   do_package_index() {
>   	set -ex
> -	package_update_index_ipk
> +	${PACKAGEINDEXES}
>   	set +ex
>   }
>   addtask do_package_index before do_build

Updated version of this with direct PACKAGEINDEXDEP was pulled into oe-core

Thanks for working through this.

Sau!




      reply	other threads:[~2011-05-20 15:14 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-18 13:10 [PATCH 0/1][v3] Automatically generate package repos for rpmand deb [bug #1024] Dexuan Cui
2011-05-18 13:10 ` [PATCH 1/1][RFC][v3] package-index.bb: add support for rpm and deb Dexuan Cui
2011-05-20 15:11   ` Saul Wold [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4DD684A2.6020904@linux.intel.com \
    --to=sgw@linux.intel.com \
    --cc=openembedded-core@lists.openembedded.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.