From: Hal Rosenstock <hal-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
To: Alex Netes <alexne-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 1/2] opensm/osm_pkey_mgr.c: Pack switch peer port PKey tables
Date: Fri, 20 May 2011 14:08:53 -0400 [thread overview]
Message-ID: <4DD6AE35.8030703@dev.mellanox.co.il> (raw)
In-Reply-To: <20110516145636.GA1943-iQai9MGU/dyyaiaB+Ve85laTQe2KTcn/@public.gmane.org>
Hi Alex,
On 5/16/2011 10:56 AM, Alex Netes wrote:
> Hi Hal,
>
> On 19:45 Mon 02 May , Hal Rosenstock wrote:
>> Hi Alex,
>>
>> On 5/2/2011 8:12 AM, Alex Netes wrote:
>>> Hi Hal,
>>>
>>>
>>> On 15:39 Mon 11 Apr , Hal Rosenstock wrote:
>>>>
>>>> In pkey_mgr_update_peer_port, rather than mirror the end port
>>>> PKey table, pack the peer switch's port PKey table to
>>>> eliminate any holes.
>>>>
>>>
>>> Why don't you want to pack port's pkey table itself and mirror it packed to
>>> the peer's port?
>>
>> It's disruptive to change end port pkey indices whereas that's not the
>> case on switch external ports and it has benefit there.
I added text to this effect in the patch description in v2 of this patch.
>>>
>>>> Signed-off-by: Hal Rosenstock <hal-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
>>>> ---
>>>> diff --git a/opensm/osm_pkey_mgr.c b/opensm/osm_pkey_mgr.c
>>>> index f6bc9d1..06d9b1e 100644
>>>> --- a/opensm/osm_pkey_mgr.c
>>>> +++ b/opensm/osm_pkey_mgr.c
>>>> @@ -398,6 +398,35 @@ static uint16_t last_used_pkey_index(const osm_port_t * const p_port,
>>>> return index;
>>>> }
>>>>
>>>> +static int update_peer_block(osm_log_t * p_log, osm_sm_t * sm,
>>>> + osm_physp_t * peer,
>>>> + osm_pkey_tbl_t * p_peer_pkey_tbl,
>>>> + ib_pkey_table_t * new_peer_block,
>>>> + uint16_t peer_block_idx, osm_node_t * p_node)
>>>> +{
>>>> + int ret = 0;
>>>> + ib_pkey_table_t *peer_block;
>>>> +
>>>> + peer_block = osm_pkey_tbl_block_get(p_peer_pkey_tbl, peer_block_idx);
>>>> + if (!peer_block ||
>>>> + memcmp(peer_block, new_peer_block, sizeof(*peer_block))) {
>>>> + if (pkey_mgr_update_pkey_entry(sm, peer, new_peer_block,
>>>> + peer_block_idx) != IB_SUCCESS) {
>>>> + OSM_LOG(p_log, OSM_LOG_ERROR, "ERR 0509: "
>>>> + "pkey_mgr_update_pkey_entry() failed to update "
>>>> + "pkey table block %d for node 0x%016"
>>>> + PRIx64 " port %u (%s)\n",
>>>> + peer_block_idx,
>>>> + cl_ntoh64(osm_node_get_node_guid(p_node)),
>>>> + osm_physp_get_port_num(peer),
>>>> + p_node->print_desc);
>>>> + ret = -1;
>>>> + }
>>>> + }
>>>> +
>>>> + return ret;
>>>> +}
>>>> +
>>>> static int pkey_mgr_update_peer_port(osm_log_t * p_log, osm_sm_t * sm,
>>>> const osm_subn_t * p_subn,
>>>> const osm_port_t * const p_port,
>>>> @@ -405,15 +434,16 @@ static int pkey_mgr_update_peer_port(osm_log_t * p_log, osm_sm_t * sm,
>>>> {
>>>> osm_physp_t *p_physp, *peer;
>>>> osm_node_t *p_node;
>>>> - ib_pkey_table_t *block, *peer_block;
>>>> + ib_pkey_table_t *block;
>>>> const osm_pkey_tbl_t *p_pkey_tbl;
>>>> osm_pkey_tbl_t *p_peer_pkey_tbl;
>>>> - uint16_t block_index;
>>>> + uint16_t block_index, peer_block_idx;
>>>> uint16_t peer_max_blocks;
>>>> uint16_t last_index;
>>>> - ib_api_status_t status = IB_SUCCESS;
>>>> - ib_pkey_table_t empty_block;
>>>> - int ret = 0;
>>>> + ib_pkey_table_t new_peer_block;
>>>> + uint16_t pkey_idx, peer_pkey_idx;
>>>> + ib_net16_t pkey;
>>>> + int ret = 0, loop_exit = 0;
>>>>
>>>> p_physp = p_port->p_physp;
>>>> if (!p_physp)
>>>> @@ -425,70 +455,80 @@ static int pkey_mgr_update_peer_port(osm_log_t * p_log, osm_sm_t * sm,
>>>> if (!p_node->sw || !p_node->sw->switch_info.enforce_cap)
>>>> return 0;
>>>>
>>>> - p_pkey_tbl = osm_physp_get_pkey_tbl(p_physp);
>>>> - peer_max_blocks = pkey_mgr_get_physp_max_blocks(peer);
>>>> - if (peer_max_blocks < p_pkey_tbl->used_blocks) {
>>>> - OSM_LOG(p_log, OSM_LOG_ERROR, "ERR 0508: "
>>>> - "Not enough pkey blocks (%u < %u used) on switch 0x%016"
>>>> - PRIx64 " port %u (%s). Clearing Enforcement bit\n",
>>>> - peer_max_blocks, p_pkey_tbl->used_blocks,
>>>> - cl_ntoh64(osm_node_get_node_guid(p_node)),
>>>> - osm_physp_get_port_num(peer),
>>>> - p_node->print_desc);
>>>> - enforce = FALSE;
>>>> - ret = -1;
>>>> - } else if (peer_max_blocks == p_pkey_tbl->used_blocks) {
>>>> - /* Is last used pkey index beyond switch peer port capacity ? */
>>>> - last_index = (peer_max_blocks - 1) * IB_NUM_PKEY_ELEMENTS_IN_BLOCK +
>>>> - last_used_pkey_index(p_port, p_pkey_tbl);
>>>> - if (cl_ntoh16(p_node->sw->switch_info.enforce_cap) <= last_index) {
>>>> - OSM_LOG(p_log, OSM_LOG_ERROR, "ERR 0507: "
>>>> - "Not enough pkey entries (%u <= %u) on switch 0x%016"
>>>> - PRIx64 " port %u (%s). Clearing Enforcement bit\n",
>>>> - cl_ntoh16(p_node->sw->switch_info.enforce_cap),
>>>> - last_index,
>>>> - cl_ntoh64(osm_node_get_node_guid(p_node)),
>>>> - osm_physp_get_port_num(peer),
>>>> - p_node->print_desc);
>>>> - enforce = FALSE;
>>>> - ret = -1;
>>>> - }
>>>> + if (enforce == FALSE) {
>>>> + pkey_mgr_enforce_partition(p_log, sm, peer, FALSE);
>>>> + return -1;
>>>
>>> Though it doesn't affect anything, why do you return -1 here?
>>
>> I don't recall and it doesn't look right. It should probably just be
>> return ret there.
I changed this to return ret in v2 of this patch.
>>>> }
>>>>
>>>> - if (pkey_mgr_enforce_partition(p_log, sm, peer, enforce))
>>>> - ret = -1;
>>>> -
>>>> - if (enforce == FALSE)
>>>> - return ret;
>>>> -
>>>> - memset(&empty_block, 0, sizeof(ib_pkey_table_t));
>>>> -
>>>> + p_pkey_tbl = osm_physp_get_pkey_tbl(p_physp);
>>>> + peer_max_blocks = pkey_mgr_get_physp_max_blocks(peer);
>>>> p_peer_pkey_tbl = &peer->pkeys;
>>>> - p_peer_pkey_tbl->used_blocks = p_pkey_tbl->used_blocks;
>>>> + peer_block_idx = 0;
>>>> + peer_pkey_idx = 0;
>>>> for (block_index = 0; block_index < p_pkey_tbl->used_blocks;
>>>> block_index++) {
>>>> + if (loop_exit)
>>>> + break;
>>>> block = osm_pkey_tbl_new_block_get(p_pkey_tbl, block_index);
>>>> if (!block)
>>>> - block = &empty_block;
>>>> -
>>>> - peer_block =
>>>> - osm_pkey_tbl_block_get(p_peer_pkey_tbl, block_index);
>>>> - if (!peer_block
>>>> - || memcmp(peer_block, block, sizeof(*peer_block))) {
>>>> - status = pkey_mgr_update_pkey_entry(sm, peer, block,
>>>> - block_index);
>>>> - if (status != IB_SUCCESS) {
>>>> - OSM_LOG(p_log, OSM_LOG_ERROR, "ERR 0509: "
>>>> - "pkey_mgr_update_pkey_entry() failed to update "
>>>> - "pkey table block %d for node 0x%016"
>>>> - PRIx64 " port %u (%s)\n", block_index,
>>>> - cl_ntoh64(osm_node_get_node_guid
>>>> - (p_node)),
>>>> + continue;
>>>> + for (pkey_idx = 0; pkey_idx < IB_NUM_PKEY_ELEMENTS_IN_BLOCK;
>>>> + pkey_idx++) {
>>>> + pkey = block->pkey_entry[pkey_idx];
>>>> + if (ib_pkey_is_invalid(pkey))
>>>> + continue;
>>>> + new_peer_block.pkey_entry[peer_pkey_idx] = pkey;
>>>> + if (peer_block_idx >= peer_max_blocks) {
>>>> + loop_exit = 1;
>>>> + break;
>>>> + }
>>>> + if (++peer_pkey_idx == IB_NUM_PKEY_ELEMENTS_IN_BLOCK) {
>>>> + if (update_peer_block(p_log, sm, peer,
>>>> + p_peer_pkey_tbl,
>>>> + &new_peer_block,
>>>> + peer_block_idx, p_node))
>>>> + ret = -1;
>>>> + peer_pkey_idx = 0;
>>>> + peer_block_idx++;
>>>> + }
>>>> + }
>>>> + }
>>>> +
>>>> + if (peer_block_idx < peer_max_blocks) {
>>>> + if (peer_pkey_idx) {
>>>> + /* Handle partial last block */
>>>> + for (; peer_pkey_idx < IB_NUM_PKEY_ELEMENTS_IN_BLOCK;
>>>> + peer_pkey_idx++)
>>>> + new_peer_block.pkey_entry[peer_pkey_idx] = 0;
>>>> + if (update_peer_block(p_log, sm, peer, p_peer_pkey_tbl,
>>>> + &new_peer_block, peer_block_idx,
>>>> + p_node))
>>>> + ret = -1;
>>>> + } else
>>>> + peer_block_idx--;
>>>> +
>>>> + p_peer_pkey_tbl->used_blocks = peer_block_idx + 1;
>>>> + if (p_peer_pkey_tbl->used_blocks == peer_max_blocks) {
>>>> + /* Is last used pkey index beyond switch peer port capacity ? */
>>>> + last_index = peer_block_idx * IB_NUM_PKEY_ELEMENTS_IN_BLOCK +
>>>> + last_used_pkey_index(p_port,
>>>> + p_peer_pkey_tbl);
>>>> + if (cl_ntoh16(p_node->sw->switch_info.enforce_cap) <= last_index) {
>>>> + OSM_LOG(p_log, OSM_LOG_ERROR, "ERR 0507: "
>>>> + "Not enough pkey entries (%u <= %u) on switch 0x%016"
>>>> + PRIx64 " port %u (%s). Clearing Enforcement bit\n",
>>>> + cl_ntoh16(p_node->sw->switch_info.enforce_cap),
>>>> + last_index,
>>>> + cl_ntoh64(osm_node_get_node_guid(p_node)),
>>>> osm_physp_get_port_num(peer),
>>>> p_node->print_desc);
>>>> + enforce = FALSE;
>>>> ret = -1;
>>>> }
>>>> }
>>>> + } else {
>>>> + p_peer_pkey_tbl->used_blocks = peer_max_blocks;
>>>> + enforce = FALSE;
>>>> }
>>>>
>>>> if (!ret)
>>>
>>> Only if ret = 0, "Pkey table was updated for node..." message is printed,
>>> however Pkey table might be changed even if ret = -1.
>>
>> This is related to your comment above, right ? Or are there additional
>> places where pkey table is updated and ret is -1 ?
>>
>
> All the places.
I modified the log message to indicate that the PKey table was
successfully updated for the node. ret of -1 means there was some
failure (and things are partially updated).
-- Hal
>> -- Hal
>>
>>>> @@ -498,6 +538,9 @@ static int pkey_mgr_update_peer_port(osm_log_t * p_log, osm_sm_t * sm,
>>>> cl_ntoh64(osm_node_get_node_guid(p_node)),
>>>> osm_physp_get_port_num(peer), p_node->print_desc);
>>>>
>>>> + if (pkey_mgr_enforce_partition(p_log, sm, peer, enforce))
>>>> + ret = -1;
>>>> +
>>>> return ret;
>>>> }
>>>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
>> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2011-05-20 18:08 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-11 19:39 [PATCH 1/2] opensm/osm_pkey_mgr.c: Pack switch peer port PKey tables Hal Rosenstock
[not found] ` <4DA358F8.6070203-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2011-05-02 12:12 ` Alex Netes
[not found] ` <20110502121244.GC2088-iQai9MGU/dyyaiaB+Ve85laTQe2KTcn/@public.gmane.org>
2011-05-02 23:45 ` Hal Rosenstock
[not found] ` <4DBF4201.7070901-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2011-05-16 14:56 ` Alex Netes
[not found] ` <20110516145636.GA1943-iQai9MGU/dyyaiaB+Ve85laTQe2KTcn/@public.gmane.org>
2011-05-20 18:08 ` Hal Rosenstock [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DD6AE35.8030703@dev.mellanox.co.il \
--to=hal-ldsdmyg8hgv8yrgs2mwiifqbs+8scbdb@public.gmane.org \
--cc=alexne-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.