From: Peter Kruse <pk@q-leap.de>
To: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>,
eric.dumazet@gmail.com, linux-kernel@vger.kernel.org
Subject: Re: I have a blaze of 353 page allocation failures, all alike
Date: Mon, 23 May 2011 08:34:37 +0200 [thread overview]
Message-ID: <4DD9FFFD.6020000@q-leap.de> (raw)
In-Reply-To: <alpine.DEB.2.00.1105191059400.9313@router.home>
[-- Attachment #1: Type: text/plain, Size: 398 bytes --]
Hi Christoph,
On 05/19/2011 06:00 PM, Christoph Lameter wrote:
>
> We need the complete system log starting from bootup.
>
> This looks like it has something to do with mutexes and pipes.
ah yes, I was told that there was a program running that sent
a large file to a pipe.
Attaching dmesg from the boot after the server was reset
and the kern.log from the boot before.
Best regards,
Peter
[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 56548 bytes --]
[ 0.000000] Linux version 2.6.32.29-ql-server-20 (root@ql-dev) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Wed Feb 23 14:20:09 CET 2011
[ 0.000000] Command line: auto BOOT_IMAGE=linux ro root=100 root=/dev/mapper/vgroot-root elevator=cfq
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000097c00 (usable)
[ 0.000000] BIOS-e820: 0000000000097c00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf78e000 - 00000000bf790000 type 9
[ 0.000000] BIOS-e820: 00000000bf790000 - 00000000bf79e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf7ec000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000c40000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xc40000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D7FFF write-protect
[ 0.000000] D8000-DFFFF uncachable
[ 0.000000] E0000-E3FFF write-protect
[ 0.000000] E4000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask F800000000 write-back
[ 0.000000] 1 base 0800000000 mask FC00000000 write-back
[ 0.000000] 2 base 0C00000000 mask FFC0000000 write-back
[ 0.000000] 3 base 00C0000000 mask FFC0000000 uncachable
[ 0.000000] 4 base 00BF800000 mask FFFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf780000 page 4k
[ 0.000000] kernel direct mapping tables up to bf780000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000c40000000
[ 0.000000] 0100000000 - 0c40000000 page 2M
[ 0.000000] kernel direct mapping tables up to c40000000 @ 13000-45000
[ 0.000000] RAMDISK: 03c83000 - 040feff0
[ 0.000000] ACPI: RSDP 00000000000f9c40 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf790100 0007C (v01 100709 XSDT1044 20091007 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf790290 000F4 (v04 100709 FACP1044 20091007 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7904c0 0597A (v02 1F280 1F280000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bf79e000 00040
[ 0.000000] ACPI: APIC 00000000bf790390 000EA (v02 100709 APIC1044 20091007 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf790480 0003C (v01 100709 OEMMCFG 20091007 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf79e040 0007A (v01 100709 OEMB1044 20091007 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000bf79a4c0 00150 (v02 100709 OEMSRAT 00000001 INTL 00000001)
[ 0.000000] ACPI: DMAR 00000000bf79e0c0 00128 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79f800 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: EINJ 00000000bf79a610 00130 (v01 AMIER AMI_EINJ 20091007 MSFT 00000097)
[ 0.000000] ACPI: BERT 00000000bf79a7a0 00030 (v01 AMIER AMI_BERT 20091007 MSFT 00000097)
[ 0.000000] ACPI: ERST 00000000bf79a7d0 001B0 (v01 AMIER AMI_ERST 20091007 MSFT 00000097)
[ 0.000000] ACPI: HEST 00000000bf79a980 000A8 (v01 AMIER ABC_HEST 20091007 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 4 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 6 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 16 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 18 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 20 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 22 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-c0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-640000000
[ 0.000000] SRAT: Node 1 PXM 1 640000000-c40000000
[ 0.000000] NUMA: Allocated memnodemap from 40000 - 58840
[ 0.000000] NUMA: Using 20 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000640000000
[ 0.000000] NODE_DATA [0000000000058840 - 000000000005d83f]
[ 0.000000] bootmap [0000000000100000 - 00000000001c7fff] pages c8
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0640000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001899604] TEXT DATA BSS ==> [0001000000 - 0001899604]
[ 0.000000] #3 [0003c83000 - 00040feff0] RAMDISK ==> [0003c83000 - 00040feff0]
[ 0.000000] #4 [0000097c00 - 0000100000] BIOS reserved ==> [0000097c00 - 0000100000]
[ 0.000000] #5 [000189a000 - 000189a1b8] BRK ==> [000189a000 - 000189a1b8]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] #7 [0000013000 - 0000040000] PGTABLE ==> [0000013000 - 0000040000]
[ 0.000000] #8 [0000040000 - 0000058840] MEMNODEMAP ==> [0000040000 - 0000058840]
[ 0.000000] Bootmem setup node 1 0000000640000000-0000000c40000000
[ 0.000000] NODE_DATA [0000000640000000 - 0000000640004fff]
[ 0.000000] bootmap [0000000640005000 - 00000006400c4fff] pages c0
[ 0.000000] (9 early reservations) ==> bootmem [0640000000 - 0c40000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0001000000 - 0001899604] TEXT DATA BSS
[ 0.000000] #3 [0003c83000 - 00040feff0] RAMDISK
[ 0.000000] #4 [0000097c00 - 0000100000] BIOS reserved
[ 0.000000] #5 [000189a000 - 000189a1b8] BRK
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE
[ 0.000000] #7 [0000013000 - 0000040000] PGTABLE
[ 0.000000] #8 [0000040000 - 0000058840] MEMNODEMAP
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea0015dfffff] PMD -> [ffff880028600000-ffff88003d5fffff] on node 0
[ 0.000000] [ffffea0015e00000-ffffea002adfffff] PMD -> [ffff880640200000-ffff8806551fffff] on node 1
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00c40000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000097
[ 0.000000] 0: 0x00000100 -> 0x000bf780
[ 0.000000] 0: 0x00100000 -> 0x00640000
[ 0.000000] 1: 0x00640000 -> 0x00c40000
[ 0.000000] On node 0 totalpages: 6289159
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 179 pages reserved
[ 0.000000] DMA zone: 3740 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31
[ 0.000000] Normal zone: 75264 pages used for memmap
[ 0.000000] Normal zone: 5429760 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 6291456
[ 0.000000] Normal zone: 86016 pages used for memmap
[ 0.000000] Normal zone: 6205440 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec80400] gsi_base[48])
[ 0.000000] IOAPIC[2]: apic_id 5, version 32, address 0xfec80400, GSI 48-71
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff880028200000 s73240 r8192 d20968 u262144
[ 0.000000] pcpu-alloc: s73240 r8192 d20968 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 08 10 12 14 [1] 04 05 06 07 09 11 13 15
[ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 12404820
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=linux ro root=100 root=/dev/mapper/vgroot-root elevator=cfq
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 49552644k/51380224k available (3972k kernel code, 1057764k absent, 769816k reserved, 2393k data, 516k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2000.312 MHz processor.
[ 0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.62 BogoMIPS (lpj=8001248)
[ 0.005108] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
[ 0.022008] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.029345] Mount-cache hash table entries: 256
[ 0.029571] CPU: Physical Processor ID: 0
[ 0.029643] CPU: Processor Core ID: 0
[ 0.029715] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.029836] CPU: L2 cache: 256K
[ 0.029905] CPU: L3 cache: 4096K
[ 0.029977] CPU 0/0x0 -> Node 0
[ 0.030048] mce: CPU supports 9 MCE banks
[ 0.030129] CPU0: Thermal monitoring enabled (TM1)
[ 0.030204] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.030567] using mwait in idle threads.
[ 0.030638] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.030813] ... version: 3
[ 0.030884] ... bit width: 48
[ 0.030956] ... generic registers: 4
[ 0.031027] ... value mask: 0000ffffffffffff
[ 0.031102] ... max period: 000000007fffffff
[ 0.031176] ... fixed-purpose events: 3
[ 0.031248] ... event mask: 000000070000000f
[ 0.031340] ACPI: Core revision 20090903
[ 0.041731] Setting APIC routing to physical flat
[ 0.042353] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088786] CPU0: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05
[ 0.196236] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.206615] Initializing CPU#1
[ 0.283940] CPU: Physical Processor ID: 0
[ 0.283942] CPU: Processor Core ID: 1
[ 0.283944] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.283946] CPU: L2 cache: 256K
[ 0.283947] CPU: L3 cache: 4096K
[ 0.283949] CPU 1/0x2 -> Node 0
[ 0.283962] CPU1: Thermal monitoring enabled (TM1)
[ 0.283965] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.283988] CPU1: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05
[ 0.284796] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.305062] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.315316] Initializing CPU#2
[ 0.395727] CPU: Physical Processor ID: 0
[ 0.395728] CPU: Processor Core ID: 2
[ 0.395731] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.395733] CPU: L2 cache: 256K
[ 0.395734] CPU: L3 cache: 4096K
[ 0.395736] CPU 2/0x4 -> Node 0
[ 0.395749] CPU2: Thermal monitoring enabled (TM1)
[ 0.395752] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.395784] CPU2: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05
[ 0.396592] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.416859] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.427114] Initializing CPU#3
[ 0.507514] CPU: Physical Processor ID: 0
[ 0.507515] CPU: Processor Core ID: 3
[ 0.507518] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.507519] CPU: L2 cache: 256K
[ 0.507521] CPU: L3 cache: 4096K
[ 0.507523] CPU 3/0x6 -> Node 0
[ 0.507536] CPU3: Thermal monitoring enabled (TM1)
[ 0.507539] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.507581] CPU3: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05
[ 0.508390] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.528717] Booting processor 4 APIC 0x10 ip 0x6000
[ 0.538971] Initializing CPU#4
[ 0.619301] CPU: Physical Processor ID: 1
[ 0.619302] CPU: Processor Core ID: 0
[ 0.619304] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.619306] CPU: L2 cache: 256K
[ 0.619307] CPU: L3 cache: 4096K
[ 0.619310] CPU 4/0x10 -> Node 1
[ 0.619322] CPU4: Thermal monitoring enabled (TM1)
[ 0.619326] CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.619339] CPU4: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05
[ 0.620147] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.640437] Booting processor 5 APIC 0x12 ip 0x6000
[ 0.650693] Initializing CPU#5
[ 0.731089] CPU: Physical Processor ID: 1
[ 0.731091] CPU: Processor Core ID: 1
[ 0.731093] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.731095] CPU: L2 cache: 256K
[ 0.731097] CPU: L3 cache: 4096K
[ 0.731099] CPU 5/0x12 -> Node 1
[ 0.731114] CPU5: Thermal monitoring enabled (TM1)
[ 0.731117] CPU 5 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.731211] CPU5: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05
[ 0.732020] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.752332] Booting processor 6 APIC 0x14 ip 0x6000
[ 0.762589] Initializing CPU#6
[ 0.842876] CPU: Physical Processor ID: 1
[ 0.842877] CPU: Processor Core ID: 2
[ 0.842880] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.842882] CPU: L2 cache: 256K
[ 0.842883] CPU: L3 cache: 4096K
[ 0.842886] CPU 6/0x14 -> Node 1
[ 0.842900] CPU6: Thermal monitoring enabled (TM1)
[ 0.842904] CPU 6 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.842954] CPU6: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05
[ 0.843762] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.864070] Booting processor 7 APIC 0x16 ip 0x6000
[ 0.874326] Initializing CPU#7
[ 0.954663] CPU: Physical Processor ID: 1
[ 0.954664] CPU: Processor Core ID: 3
[ 0.954667] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.954669] CPU: L2 cache: 256K
[ 0.954670] CPU: L3 cache: 4096K
[ 0.954673] CPU 7/0x16 -> Node 1
[ 0.954688] CPU7: Thermal monitoring enabled (TM1)
[ 0.954691] CPU 7 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.954721] CPU7: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05
[ 0.955529] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 0.975706] Brought up 8 CPUs
[ 0.975777] Total of 8 processors activated (32002.46 BogoMIPS).
[ 0.978606] xor: automatically using best checksumming function: generic_sse
[ 0.998582] generic_sse: 7445.000 MB/sec
[ 0.998655] xor: using function: generic_sse (7445.000 MB/sec)
[ 0.998805] NET: Registered protocol family 16
[ 0.998970] ACPI: bus type pci registered
[ 0.999085] PCI: Using configuration type 1 for base access
[ 1.000173] bio: create slab <bio-0> at 0
[ 1.001130] ACPI: EC: Look up EC in DSDT
[ 1.003890] ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[ 1.004092] \_SB_:_OSC evaluation returned wrong type
[ 1.004094] _OSC request data:1 6
[ 1.004603] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.012316] ACPI: Interpreter enabled
[ 1.012389] ACPI: (supports S0 S1 S5)
[ 1.012619] ACPI: Using IOAPIC for interrupt routing
[ 1.023502] ACPI Warning: Incorrect checksum in table [OEMB] - 0A, should be FF (20090903/tbutils-314)
[ 1.024009] ACPI: No dock devices found.
[ 1.024258] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.024417] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.024496] pci 0000:00:00.0: PME# disabled
[ 1.024630] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.024708] pci 0000:00:01.0: PME# disabled
[ 1.024844] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.024922] pci 0000:00:03.0: PME# disabled
[ 1.025058] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 1.025136] pci 0000:00:05.0: PME# disabled
[ 1.025272] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.025350] pci 0000:00:07.0: PME# disabled
[ 1.025485] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 1.025563] pci 0000:00:09.0: PME# disabled
[ 1.025999] pci 0000:00:16.0: reg 10 64bit mmio: [0xfb8d8000-0xfb8dbfff]
[ 1.026063] pci 0000:00:16.1: reg 10 64bit mmio: [0xfb8dc000-0xfb8dffff]
[ 1.026126] pci 0000:00:16.2: reg 10 64bit mmio: [0xfb8e0000-0xfb8e3fff]
[ 1.026190] pci 0000:00:16.3: reg 10 64bit mmio: [0xfb8e4000-0xfb8e7fff]
[ 1.026253] pci 0000:00:16.4: reg 10 64bit mmio: [0xfb8e8000-0xfb8ebfff]
[ 1.026316] pci 0000:00:16.5: reg 10 64bit mmio: [0xfb8ec000-0xfb8effff]
[ 1.026380] pci 0000:00:16.6: reg 10 64bit mmio: [0xfb8f0000-0xfb8f3fff]
[ 1.026443] pci 0000:00:16.7: reg 10 64bit mmio: [0xfb8f4000-0xfb8f7fff]
[ 1.026528] pci 0000:00:1a.0: reg 20 io port: [0x9400-0x941f]
[ 1.026601] pci 0000:00:1a.1: reg 20 io port: [0x9480-0x949f]
[ 1.026669] pci 0000:00:1a.2: reg 20 io port: [0x9800-0x981f]
[ 1.026743] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfb8fa000-0xfb8fa3ff]
[ 1.026797] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.026876] pci 0000:00:1a.7: PME# disabled
[ 1.027008] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.027086] pci 0000:00:1c.0: PME# disabled
[ 1.027222] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.027300] pci 0000:00:1c.4: PME# disabled
[ 1.027424] pci 0000:00:1d.0: reg 20 io port: [0x9880-0x989f]
[ 1.027493] pci 0000:00:1d.1: reg 20 io port: [0x9c00-0x9c1f]
[ 1.027562] pci 0000:00:1d.2: reg 20 io port: [0xa000-0xa01f]
[ 1.027634] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfb8fc000-0xfb8fc3ff]
[ 1.027688] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.027766] pci 0000:00:1d.7: PME# disabled
[ 1.027965] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 1.027969] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 1.028066] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 1.028146] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 1.028244] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 001f)
[ 1.028341] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca0 (mask 000f)
[ 1.028486] pci 0000:00:1f.2: reg 10 io port: [0xbc00-0xbc07]
[ 1.028491] pci 0000:00:1f.2: reg 14 io port: [0xb880-0xb883]
[ 1.028497] pci 0000:00:1f.2: reg 18 io port: [0xb800-0xb807]
[ 1.028502] pci 0000:00:1f.2: reg 1c io port: [0xb480-0xb483]
[ 1.028508] pci 0000:00:1f.2: reg 20 io port: [0xb400-0xb40f]
[ 1.028513] pci 0000:00:1f.2: reg 24 io port: [0xb080-0xb08f]
[ 1.028559] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb8fe000-0xfb8fe0ff]
[ 1.028572] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 1.028616] pci 0000:00:1f.5: reg 10 io port: [0xac00-0xac07]
[ 1.028622] pci 0000:00:1f.5: reg 14 io port: [0xa880-0xa883]
[ 1.028627] pci 0000:00:1f.5: reg 18 io port: [0xa800-0xa807]
[ 1.028632] pci 0000:00:1f.5: reg 1c io port: [0xa480-0xa483]
[ 1.028638] pci 0000:00:1f.5: reg 20 io port: [0xa400-0xa40f]
[ 1.028643] pci 0000:00:1f.5: reg 24 io port: [0xa080-0xa08f]
[ 1.028711] pci 0000:0a:00.0: reg 10 32bit mmio: [0xfbe60000-0xfbe7ffff]
[ 1.028717] pci 0000:0a:00.0: reg 14 32bit mmio: [0xfbe40000-0xfbe5ffff]
[ 1.028724] pci 0000:0a:00.0: reg 18 io port: [0xe880-0xe89f]
[ 1.028730] pci 0000:0a:00.0: reg 1c 32bit mmio: [0xfbe1c000-0xfbe1ffff]
[ 1.028745] pci 0000:0a:00.0: reg 30 32bit mmio pref: [0xfbe20000-0xfbe3ffff]
[ 1.028774] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
[ 1.028853] pci 0000:0a:00.0: PME# disabled
[ 1.028968] pci 0000:0a:00.1: reg 10 32bit mmio: [0xfbee0000-0xfbefffff]
[ 1.028975] pci 0000:0a:00.1: reg 14 32bit mmio: [0xfbec0000-0xfbedffff]
[ 1.028981] pci 0000:0a:00.1: reg 18 io port: [0xec00-0xec1f]
[ 1.028988] pci 0000:0a:00.1: reg 1c 32bit mmio: [0xfbe9c000-0xfbe9ffff]
[ 1.029002] pci 0000:0a:00.1: reg 30 32bit mmio pref: [0xfbea0000-0xfbebffff]
[ 1.029032] pci 0000:0a:00.1: PME# supported from D0 D3hot D3cold
[ 1.029110] pci 0000:0a:00.1: PME# disabled
[ 1.029217] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 1.029220] pci 0000:00:01.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
[ 1.029259] pci 0000:09:00.0: reg 10 64bit mmio: [0xfbc00000-0xfbdfffff]
[ 1.029281] pci 0000:09:00.0: reg 30 32bit mmio pref: [0xfbb80000-0xfbbfffff]
[ 1.029305] pci 0000:09:00.0: supports D1
[ 1.029335] pci 0000:00:03.0: bridge 32bit mmio: [0xfbb00000-0xfbdfffff]
[ 1.029423] pci 0000:04:00.0: PXH quirk detected; SHPC device MSI disabled
[ 1.029532] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 1.029610] pci 0000:04:00.0: PME# disabled
[ 1.029715] pci 0000:04:00.2: PXH quirk detected; SHPC device MSI disabled
[ 1.029823] pci 0000:04:00.2: PME# supported from D0 D3hot D3cold
[ 1.029901] pci 0000:04:00.2: PME# disabled
[ 1.030190] pci 0000:02:00.0: reg 10 io port: [0xd400-0xd407]
[ 1.030199] pci 0000:02:00.0: reg 14 io port: [0xdc00-0xdc03]
[ 1.030208] pci 0000:02:00.0: reg 18 io port: [0xd880-0xd887]
[ 1.030217] pci 0000:02:00.0: reg 1c io port: [0xd800-0xd803]
[ 1.030225] pci 0000:02:00.0: reg 20 io port: [0xd480-0xd48f]
[ 1.030241] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfbaf0000-0xfbafffff]
[ 1.030322] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
[ 1.030326] pci 0000:00:1c.4: bridge 32bit mmio: [0xfba00000-0xfbafffff]
[ 1.030366] pci 0000:01:01.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 1.030373] pci 0000:01:01.0: reg 14 io port: [0xc000-0xc0ff]
[ 1.030380] pci 0000:01:01.0: reg 18 32bit mmio: [0xfb9d0000-0xfb9dffff]
[ 1.030402] pci 0000:01:01.0: reg 30 32bit mmio pref: [0xfb9e0000-0xfb9fffff]
[ 1.030421] pci 0000:01:01.0: supports D1 D2
[ 1.030464] pci 0000:00:1e.0: transparent bridge
[ 1.030542] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[ 1.030546] pci 0000:00:1e.0: bridge 32bit mmio: [0xfb900000-0xfb9fffff]
[ 1.030552] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf0000000-0xf7ffffff]
[ 1.030585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.030880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.030998] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 1.031064] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 1.031131] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE5._PRT]
[ 1.031196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 1.031261] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
[ 1.031330] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHA._PRT]
[ 1.031421] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHB._PRT]
[ 1.031487] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 1.031564] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 1.073169] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 1.073933] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 1.074699] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 1.075459] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 1.076220] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.077093] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 1.077853] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.078729] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 1.079477] vgaarb: device added: PCI:0000:01:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.079574] vgaarb: loaded
[ 1.079791] SCSI subsystem initialized
[ 1.080018] libata version 3.00 loaded.
[ 1.146316] raid6: int64x1 2163 MB/s
[ 1.214186] raid6: int64x2 2503 MB/s
[ 1.282068] raid6: int64x4 1786 MB/s
[ 1.349931] raid6: int64x8 1579 MB/s
[ 1.417806] raid6: sse2x1 4875 MB/s
[ 1.485666] raid6: sse2x2 5617 MB/s
[ 1.553538] raid6: sse2x4 6703 MB/s
[ 1.553609] raid6: using algorithm sse2x4 (6703 MB/s)
[ 1.553689] PCI: Using ACPI for IRQ routing
[ 1.554096] hpet clockevent registered
[ 1.554100] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 1.566661] Switching to clocksource tsc
[ 1.567068] pnp: PnP ACPI init
[ 1.567159] ACPI: bus type pnp registered
[ 1.572285] pnp: PnP ACPI: found 16 devices
[ 1.572359] ACPI: ACPI bus type pnp unregistered
[ 1.572442] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
[ 1.572521] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[ 1.572601] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
[ 1.572681] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[ 1.572760] system 00:01: iomem range 0xfec8a000-0xfec8afff has been reserved
[ 1.572840] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
[ 1.572925] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 1.579739] system 00:09: ioport range 0x800-0x87f has been reserved
[ 1.579818] system 00:09: ioport range 0x500-0x57f could not be reserved
[ 1.579897] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.579977] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 1.580056] system 00:09: iomem range 0xfed40000-0xfed8ffff has been reserved
[ 1.580139] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 1.580235] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 1.580318] system 00:0d: ioport range 0xa00-0xa0f has been reserved
[ 1.580399] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.580481] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 1.580560] system 00:0f: iomem range 0xc0000-0xcffff has been reserved
[ 1.580638] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 1.580718] system 00:0f: iomem range 0x100000-0xbf8fffff could not be reserved
[ 1.580813] system 00:0f: iomem range 0xfed90000-0xffffffff could not be reserved
[ 1.585552] pci 0000:01:01.0: BAR 6: address space collision on of device [0xfb9e0000-0xfb9fffff]
[ 1.585719] pci 0000:00:01.0: PCI bridge, secondary bus 0000:0a
[ 1.585795] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 1.585872] pci 0000:00:01.0: MEM window: 0xfbe00000-0xfbefffff
[ 1.585950] pci 0000:00:01.0: PREFETCH window: disabled
[ 1.586028] pci 0000:00:03.0: PCI bridge, secondary bus 0000:09
[ 1.586104] pci 0000:00:03.0: IO window: disabled
[ 1.586180] pci 0000:00:03.0: MEM window: 0xfbb00000-0xfbdfffff
[ 1.586258] pci 0000:00:03.0: PREFETCH window: disabled
[ 1.586336] pci 0000:00:05.0: PCI bridge, secondary bus 0000:08
[ 1.586411] pci 0000:00:05.0: IO window: disabled
[ 1.586487] pci 0000:00:05.0: MEM window: disabled
[ 1.586562] pci 0000:00:05.0: PREFETCH window: disabled
[ 1.586642] pci 0000:00:07.0: PCI bridge, secondary bus 0000:07
[ 1.586718] pci 0000:00:07.0: IO window: disabled
[ 1.586794] pci 0000:00:07.0: MEM window: disabled
[ 1.586869] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.586947] pci 0000:04:00.0: PCI bridge, secondary bus 0000:06
[ 1.587023] pci 0000:04:00.0: IO window: disabled
[ 1.587099] pci 0000:04:00.0: MEM window: disabled
[ 1.587174] pci 0000:04:00.0: PREFETCH window: disabled
[ 1.587252] pci 0000:04:00.2: PCI bridge, secondary bus 0000:05
[ 1.587328] pci 0000:04:00.2: IO window: disabled
[ 1.587403] pci 0000:04:00.2: MEM window: disabled
[ 1.587479] pci 0000:04:00.2: PREFETCH window: disabled
[ 1.587557] pci 0000:00:09.0: PCI bridge, secondary bus 0000:04
[ 1.587632] pci 0000:00:09.0: IO window: disabled
[ 1.587708] pci 0000:00:09.0: MEM window: disabled
[ 1.587783] pci 0000:00:09.0: PREFETCH window: disabled
[ 1.587861] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 1.587938] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 1.588016] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc01fffff
[ 1.588094] pci 0000:00:1c.0: PREFETCH window: 0x000000c0200000-0x000000c03fffff
[ 1.588193] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
[ 1.588270] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
[ 1.588348] pci 0000:00:1c.4: MEM window: 0xfba00000-0xfbafffff
[ 1.588426] pci 0000:00:1c.4: PREFETCH window: 0x000000c0400000-0x000000c05fffff
[ 1.588526] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 1.588604] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 1.588681] pci 0000:00:1e.0: MEM window: 0xfb900000-0xfb9fffff
[ 1.588759] pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff
[ 1.588867] pci 0000:00:01.0: setting latency timer to 64
[ 1.588874] pci 0000:00:03.0: setting latency timer to 64
[ 1.588882] pci 0000:00:05.0: setting latency timer to 64
[ 1.588890] pci 0000:00:07.0: setting latency timer to 64
[ 1.588897] pci 0000:00:09.0: setting latency timer to 64
[ 1.588905] pci 0000:04:00.0: setting latency timer to 64
[ 1.588912] pci 0000:04:00.2: setting latency timer to 64
[ 1.588919] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 1.589004] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.589084] pci 0000:00:1c.0: setting latency timer to 64
[ 1.589091] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.589171] pci 0000:00:1c.4: setting latency timer to 64
[ 1.589177] pci 0000:00:1e.0: setting latency timer to 64
[ 1.589181] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.589184] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.589186] pci_bus 0000:0a: resource 0 io: [0xe000-0xefff]
[ 1.589188] pci_bus 0000:0a: resource 1 mem: [0xfbe00000-0xfbefffff]
[ 1.589191] pci_bus 0000:09: resource 1 mem: [0xfbb00000-0xfbdfffff]
[ 1.589194] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
[ 1.589196] pci_bus 0000:03: resource 1 mem: [0xc0000000-0xc01fffff]
[ 1.589199] pci_bus 0000:03: resource 2 pref mem [0xc0200000-0xc03fffff]
[ 1.589201] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 1.589203] pci_bus 0000:02: resource 1 mem: [0xfba00000-0xfbafffff]
[ 1.589205] pci_bus 0000:02: resource 2 pref mem [0xc0400000-0xc05fffff]
[ 1.589208] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 1.589210] pci_bus 0000:01: resource 1 mem: [0xfb900000-0xfb9fffff]
[ 1.589212] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff]
[ 1.589214] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 1.589216] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.589280] NET: Registered protocol family 2
[ 1.589751] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.591358] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.593348] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.593647] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.593725] TCP reno registered
[ 1.594006] NET: Registered protocol family 1
[ 1.594323] RPC: Registered udp transport module.
[ 1.594396] RPC: Registered tcp transport module.
[ 1.594470] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.594757] pci 0000:01:01.0: Boot video device
[ 1.594816] Trying to unpack rootfs image as initramfs...
[ 1.715417] Freeing initrd memory: 4591k freed
[ 1.719582] VFS: Disk quotas dquot_6.5.2
[ 1.719678] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.720206] msgmni has been set to 32768
[ 1.720590] alg: No test for stdrng (krng)
[ 1.720694] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.720790] io scheduler noop registered
[ 1.720862] io scheduler anticipatory registered
[ 1.720935] io scheduler deadline registered
[ 1.721029] io scheduler cfq registered (default)
[ 1.721295] pcieport 0000:00:01.0: irq 72 for MSI/MSI-X
[ 1.721303] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.721405] pcieport 0000:00:03.0: irq 73 for MSI/MSI-X
[ 1.721411] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.721511] pcieport 0000:00:05.0: irq 74 for MSI/MSI-X
[ 1.721518] pcieport 0000:00:05.0: setting latency timer to 64
[ 1.721617] pcieport 0000:00:07.0: irq 75 for MSI/MSI-X
[ 1.721624] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.721722] pcieport 0000:00:09.0: irq 76 for MSI/MSI-X
[ 1.721729] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.721827] pcieport 0000:00:1c.0: irq 77 for MSI/MSI-X
[ 1.721835] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.721944] pcieport 0000:00:1c.4: irq 78 for MSI/MSI-X
[ 1.721952] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.738711] Real Time Clock Driver v1.12b
[ 1.738889] Linux agpgart interface v0.103
[ 1.738962] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.739132] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.739328] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.739771] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.740047] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.740378] Floppy drive(s): fd0 is 1.44M
[ 1.758132] FDC 0 is a post-1991 82077
[ 1.760145] brd: module loaded
[ 1.760670] loop: module loaded
[ 1.760740] HP CISS Driver (v 3.6.20)
[ 1.760984] Adaptec aacraid driver 1.1-5[2461]-ms
[ 1.761091] aacraid 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.761172] aacraid 0000:09:00.0: setting latency timer to 64
[ 1.826573] IRQ 16/aacraid: IRQF_DISABLED is not guaranteed on shared IRQs
[ 2.033946] AAC0: kernel 5.2-0[17899] Apr 14 2010
[ 2.034025] AAC0: monitor 5.2-0[17899]
[ 2.034096] AAC0: bios 5.2-0[17899]
[ 2.034168] AAC0: serial 9D511144775
[ 2.034238] AAC0: Non-DASD support enabled.
[ 2.034310] AAC0: 64bit support enabled.
[ 2.034382] AAC0: 64 Bit DAC enabled
[ 2.047360] scsi0 : aacraid
[ 2.047643] scsi 0:0:0:0: Direct-Access Adaptec Vol1 V1.0 PQ: 0 ANSI: 2
[ 2.048018] scsi 0:0:1:0: Direct-Access Adaptec Raid6 V1.0 PQ: 0 ANSI: 2
[ 2.059436] scsi 0:1:8:0: Direct-Access ST3250310NS SN06 PQ: 1 ANSI: 5
[ 2.059816] scsi 0:1:9:0: Direct-Access ST3250310NS SN06 PQ: 1 ANSI: 5
[ 2.060179] scsi 0:1:10:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.060547] scsi 0:1:11:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.060920] scsi 0:1:12:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.061285] scsi 0:1:13:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.061646] scsi 0:1:14:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.062017] scsi 0:1:15:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.062383] scsi 0:1:16:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.062745] scsi 0:1:17:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.063116] scsi 0:1:18:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.063481] scsi 0:1:19:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.063847] scsi 0:1:20:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.064218] scsi 0:1:21:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.064591] scsi 0:1:22:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.064959] scsi 0:1:23:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.065329] scsi 0:1:24:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.065702] scsi 0:1:25:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.066071] scsi 0:1:26:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.066437] scsi 0:1:27:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.066807] scsi 0:1:28:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.067183] scsi 0:1:29:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.067556] scsi 0:1:30:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.067933] scsi 0:1:31:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.098990] scsi 0:3:0:0: Enclosure LSILOGIC SASX36 A.1 7015 PQ: 0 ANSI: 3
[ 2.115181] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 2.115312] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 2.115404] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
[ 2.115499] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 2.115589] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 2.115678] 3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
[ 2.115788] st: Version 20081215, fixed bufsize 32768, s/g segs 256
[ 2.116054] sd 0:0:1:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
[ 2.116058] sd 0:0:0:0: [sda] 488017920 512-byte logical blocks: (249 GB/232 GiB)
[ 2.116075] ata_piix 0000:00:1f.2: version 2.13
[ 2.116078] sd 0:0:0:0: [sda] Write Protect is off
[ 2.116080] sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00
[ 2.116092] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.116096] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.116108] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 2.116137] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.116194] scsi1 : ata_piix
[ 2.116252] scsi2 : ata_piix
[ 2.118008] ata1: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
[ 2.118016] ata2: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
[ 2.118040] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.118045] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.118091] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.118130] scsi3 : ata_piix
[ 2.118187] scsi4 : ata_piix
[ 2.119846] ata3: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19
[ 2.119851] ata4: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19
[ 2.119965] Fusion MPT base driver 3.04.12
[ 2.119966] Copyright (c) 1999-2008 LSI Corporation
[ 2.119973] Fusion MPT SPI Host driver 3.04.12
[ 2.119987] Fusion MPT SAS Host driver 3.04.12
[ 2.120052] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.121561] sda:
[ 2.122348] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.122353] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.122437] mice: PS/2 mouse device common for all mice
[ 2.122469] sda1 sda2
[ 2.124892] sd 0:0:1:0: [sdb] 74113331200 512-byte logical blocks: (37.9 TB/34.5 TiB)
[ 2.124895] md: raid0 personality registered for level 0
[ 2.124897] md: raid1 personality registered for level 1
[ 2.124900] md: raid10 personality registered for level 10
[ 2.124901] md: raid6 personality registered for level 6
[ 2.124903] md: raid5 personality registered for level 5
[ 2.124904] md: raid4 personality registered for level 4
[ 2.124906] md: multipath personality registered for level -4
[ 2.124990] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 2.125594] sd 0:0:1:0: [sdb] Write Protect is off
[ 2.125673] sd 0:0:1:0: [sdb] Mode Sense: 06 00 10 00
[ 2.125697] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 2.125857] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.126030] EDAC MC: Ver: 2.1.0 Feb 23 2011
[ 2.126257] cpuidle: using governor ladder
[ 2.126443] TCP cubic registered
[ 2.126532] NET: Registered protocol family 17
[ 2.127508] sd 0:0:1:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
[ 2.127649] sdb: unknown partition table
[ 2.127898] sd 0:0:1:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
[ 2.128038] sd 0:0:1:0: [sdb] Attached SCSI removable disk
[ 2.140476] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.393896] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1
[ 2.449980] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.460683] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.765421] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 2.765510] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 2.776151] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 2.776239] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 2.776365] Freeing unused kernel memory: 516k freed
[ 2.776556] Write protecting the kernel read-only data: 5440k
[ 3.127359] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
[ 3.127457] Copyright (c) 2007-2009 Intel Corporation.
[ 3.127573] igb 0000:0a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.127661] igb 0000:0a:00.0: setting latency timer to 64
[ 3.127925] igb 0000:0a:00.0: irq 79 for MSI/MSI-X
[ 3.127928] igb 0000:0a:00.0: irq 80 for MSI/MSI-X
[ 3.127931] igb 0000:0a:00.0: irq 81 for MSI/MSI-X
[ 3.127934] igb 0000:0a:00.0: irq 82 for MSI/MSI-X
[ 3.127937] igb 0000:0a:00.0: irq 83 for MSI/MSI-X
[ 3.127940] igb 0000:0a:00.0: irq 84 for MSI/MSI-X
[ 3.127943] igb 0000:0a:00.0: irq 85 for MSI/MSI-X
[ 3.127946] igb 0000:0a:00.0: irq 86 for MSI/MSI-X
[ 3.127948] igb 0000:0a:00.0: irq 87 for MSI/MSI-X
[ 3.318644] igb 0000:0a:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 3.318729] igb 0000:0a:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:cf:ff:84
[ 3.318883] igb 0000:0a:00.0: eth0: PBA No: 0010ff-0ff
[ 3.318958] igb 0000:0a:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 3.319081] igb 0000:0a:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.319170] igb 0000:0a:00.1: setting latency timer to 64
[ 3.319431] igb 0000:0a:00.1: irq 88 for MSI/MSI-X
[ 3.319434] igb 0000:0a:00.1: irq 89 for MSI/MSI-X
[ 3.319437] igb 0000:0a:00.1: irq 90 for MSI/MSI-X
[ 3.319439] igb 0000:0a:00.1: irq 91 for MSI/MSI-X
[ 3.319442] igb 0000:0a:00.1: irq 92 for MSI/MSI-X
[ 3.319444] igb 0000:0a:00.1: irq 93 for MSI/MSI-X
[ 3.319447] igb 0000:0a:00.1: irq 94 for MSI/MSI-X
[ 3.319449] igb 0000:0a:00.1: irq 95 for MSI/MSI-X
[ 3.319452] igb 0000:0a:00.1: irq 96 for MSI/MSI-X
[ 3.482177] usbcore: registered new interface driver usbfs
[ 3.482289] usbcore: registered new interface driver hub
[ 3.482389] usbcore: registered new device driver usb
[ 3.484054] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.484192] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.484276] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.484284] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.484378] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.484497] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009400
[ 3.484701] usb usb1: configuration #1 chosen from 1 choice
[ 3.484798] hub 1-0:1.0: USB hub found
[ 3.484874] hub 1-0:1.0: 2 ports detected
[ 3.485013] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.485097] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.485099] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.485179] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 3.485303] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009480
[ 3.485453] usb usb2: configuration #1 chosen from 1 choice
[ 3.485549] hub 2-0:1.0: USB hub found
[ 3.485623] hub 2-0:1.0: 2 ports detected
[ 3.485752] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.485834] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 3.485837] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.485916] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 3.486032] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009800
[ 3.486126] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.486182] usb usb3: configuration #1 chosen from 1 choice
[ 3.486205] hub 3-0:1.0: USB hub found
[ 3.486210] hub 3-0:1.0: 2 ports detected
[ 3.486267] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.486273] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.486276] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.486282] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 3.486317] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009880
[ 3.486395] usb usb4: configuration #1 chosen from 1 choice
[ 3.486417] hub 4-0:1.0: USB hub found
[ 3.486422] hub 4-0:1.0: 2 ports detected
[ 3.486477] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.486482] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.486485] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.486493] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 3.486523] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009c00
[ 3.486596] usb usb5: configuration #1 chosen from 1 choice
[ 3.486619] hub 5-0:1.0: USB hub found
[ 3.486623] hub 5-0:1.0: 2 ports detected
[ 3.486684] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.486690] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.486693] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.486699] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 3.486727] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a000
[ 3.486805] usb usb6: configuration #1 chosen from 1 choice
[ 3.486827] hub 6-0:1.0: USB hub found
[ 3.486832] hub 6-0:1.0: 2 ports detected
[ 3.488036] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 3.488168] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.488281] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.488284] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.488370] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 3.488505] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.492452] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.492461] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb8fa000
[ 3.511843] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.512054] usb usb7: configuration #1 chosen from 1 choice
[ 3.512158] hub 7-0:1.0: USB hub found
[ 3.512235] hub 7-0:1.0: 6 ports detected
[ 3.512386] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.512480] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.512483] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.512563] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 3.512688] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.514455] igb 0000:0a:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 3.514541] igb 0000:0a:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:cf:ff:85
[ 3.514701] igb 0000:0a:00.1: eth1: PBA No: 0010ff-0ff
[ 3.514781] igb 0000:0a:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 3.516637] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.516645] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb8fc000
[ 3.535820] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.535983] usb usb8: configuration #1 chosen from 1 choice
[ 3.536082] hub 8-0:1.0: USB hub found
[ 3.536159] hub 8-0:1.0: 6 ports detected
[ 3.824714] usb 7-5: new high speed USB device using ehci_hcd and address 2
[ 3.958182] usb 7-5: configuration #1 chosen from 1 choice
[ 4.322693] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 4.493529] usb 4-2: configuration #1 chosen from 1 choice
[ 5.231673] input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:1a.7/usb7/7-5/7-5:1.0/input/input2
[ 5.231858] generic-usb 0003:14DD:0002.0001: input: USB HID v1.01 Mouse [Peppercon AG Multidevice] on usb-0000:00:1a.7-5/input0
[ 5.233134] input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:1a.7/usb7/7-5/7-5:1.1/input/input3
[ 5.233267] generic-usb 0003:14DD:0002.0002: input: USB HID v1.01 Keyboard [Peppercon AG Multidevice] on usb-0000:00:1a.7-5/input1
[ 5.233387] usbcore: registered new interface driver usbhid
[ 5.233463] usbhid: v2.6:USB HID core driver
[ 5.531513] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 5.531591] EXT3-fs: write access will be enabled during recovery.
[ 5.906543] kjournald starting. Commit interval 5 seconds
[ 5.906553] EXT3-fs: dm-0: orphan cleanup on readonly fs
[ 5.911646] ext3_orphan_cleanup: deleting unreferenced inode 36809
[ 5.923295] EXT3-fs: dm-0: 1 orphan inode deleted
[ 5.923375] EXT3-fs: recovery complete.
[ 5.930764] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.720152] udevd version 125 started
[ 7.003153] ACPI: SSDT 00000000bf79e1f0 00FAC (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 7.004045] ACPI: SSDT 00000000bf79f1a0 00659 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 7.007022] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 7.007126] ACPI: Power Button [PWRB]
[ 7.007209] Monitor-Mwait will be used to enter C-3 state
[ 7.007441] Monitor-Mwait will be used to enter C-3 state
[ 7.007541] processor LNXCPU:00: registered as cooling_device0
[ 7.007677] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 7.007774] ACPI: Power Button [PWRF]
[ 7.012236] processor LNXCPU:01: registered as cooling_device1
[ 7.013692] processor LNXCPU:02: registered as cooling_device2
[ 7.015148] processor LNXCPU:03: registered as cooling_device3
[ 7.016777] processor LNXCPU:04: registered as cooling_device4
[ 7.033370] processor LNXCPU:05: registered as cooling_device5
[ 7.035002] processor LNXCPU:06: registered as cooling_device6
[ 7.045118] processor LNXCPU:07: registered as cooling_device7
[ 7.932691] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 10.151054] Adding 41943032k swap on /dev/mapper/vgroot-swap. Priority:-1 extents:1 across:41943032k
[ 10.162387] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 10.162626] EXT3 FS on dm-0, internal journal
[ 25.605369] fuse init (API version 7.13)
[ 25.787164] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[ 25.824638] kjournald starting. Commit interval 5 seconds
[ 25.824935] EXT3 FS on dm-2, internal journal
[ 25.825065] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.826775] kjournald starting. Commit interval 5 seconds
[ 25.826941] EXT3 FS on dm-3, internal journal
[ 25.827117] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.828785] kjournald starting. Commit interval 5 seconds
[ 25.828894] EXT3 FS on dm-4, internal journal
[ 25.828897] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.854908] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 25.860131] SGI XFS Quota Management subsystem
[ 25.878264] XFS mounting filesystem dm-6
[ 26.014187] Starting XFS recovery on filesystem: dm-6 (logdev: internal)
[ 26.168204] Ending XFS recovery on filesystem: dm-6 (logdev: internal)
[ 26.185153] XFS mounting filesystem dm-5
[ 26.338834] Starting XFS recovery on filesystem: dm-5 (logdev: internal)
[ 26.606237] Ending XFS recovery on filesystem: dm-5 (logdev: internal)
[ 26.607341] Filesystem "dm-8": Disabling barriers, not supported with external log device
[ 26.630941] XFS mounting filesystem dm-8
[ 26.787638] Starting XFS recovery on filesystem: dm-8 (logdev: /dev/vgroot/raid6-intern-log)
[ 27.425554] Ending XFS recovery on filesystem: dm-8 (logdev: /dev/vgroot/raid6-intern-log)
[ 29.169529] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 29.254818] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 29.266829] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 29.267790] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 29.267885] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 29.267981] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 39.988554] igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 50.330508] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[-- Attachment #3: kern.log.1.gz --]
[-- Type: application/x-gzip, Size: 14558 bytes --]
next prev parent reply other threads:[~2011-05-23 6:34 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-10 15:03 I have a blaze of 353 page allocation failures, all alike Peter Kruse
2011-02-14 16:49 ` Christoph Lameter
2011-02-15 7:44 ` Peter Kruse
2011-02-15 17:30 ` Christoph Lameter
2011-02-16 12:22 ` Peter Kruse
2011-02-16 15:59 ` Christoph Lameter
2011-02-16 16:03 ` Peter Kruse
2011-02-16 16:14 ` Christoph Lameter
2011-02-17 7:31 ` Peter Kruse
2011-02-17 17:03 ` Christoph Lameter
2011-02-18 12:30 ` Peter Kruse
2011-02-24 12:01 ` Peter Kruse
2011-04-12 15:01 ` Peter Kruse
2011-04-12 18:08 ` Christoph Lameter
2011-04-13 1:34 ` David Rientjes
2011-04-13 7:13 ` Peter Kruse
2011-04-13 16:17 ` Christoph Lameter
2011-05-19 11:56 ` Peter Kruse
2011-05-19 16:00 ` Christoph Lameter
2011-05-23 6:34 ` Peter Kruse [this message]
[not found] ` <4E09BEA1.1080501@q-leap.de>
[not found] ` <alpine.DEB.2.00.1107051013500.16869@router.home>
2011-07-05 17:20 ` Mel Gorman
2011-07-06 4:16 ` Dave Chinner
2011-07-06 6:50 ` Peter Kruse
2011-07-06 14:31 ` Christoph Lameter
2011-07-06 15:15 ` Peter Kruse
2011-07-06 15:30 ` Christoph Lameter
2011-11-24 10:53 ` Peter Kruse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DD9FFFD.6020000@q-leap.de \
--to=pk@q-leap.de \
--cc=cl@linux.com \
--cc=eric.dumazet@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rientjes@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.