From: Christoph Egger <Christoph.Egger@amd.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH] block/raw-posix: get right partition size
Date: Mon, 23 May 2011 12:05:07 +0200 [thread overview]
Message-ID: <4DDA3153.4070003@amd.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 602 bytes --]
This does 2 things:
- use the correct way to get the size of a disk device or partition
(from haad@NetBSD.org)
- if given a block device, use the character device instead.
(from bouyer@NetBSD.org)
From: Adam Hamsik <haad@netbsd.org>
From: Manuel Bouyer <bouyer@netbsd.org>
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
--
---to satisfy European Law for business letters:
Advanced Micro Devices GmbH
Einsteinring 24, 85689 Dornach b. Muenchen
Geschaeftsfuehrer: Alberto Bozzo, Andrew Bowd
Sitz: Dornach, Gemeinde Aschheim, Landkreis Muenchen
Registergericht Muenchen, HRB Nr. 43632
[-- Attachment #2: qemu_block_raw_posix.diff --]
[-- Type: text/plain, Size: 2596 bytes --]
diff --git a/block/raw-posix.c b/block/raw-posix.c
index 6b72470..7cf6461 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -64,6 +64,13 @@
#include <sys/dkio.h>
#endif
+#ifdef __NetBSD__
+#include <sys/ioctl.h>
+#include <sys/disklabel.h>
+#include <sys/dkio.h>
+#include <sys/disk.h>
+#endif
+
#ifdef __DragonFly__
#include <sys/ioctl.h>
#include <sys/diskslice.h>
@@ -141,7 +148,32 @@ static int raw_open_common(BlockDriverState *bs, const char *filename,
{
BDRVRawState *s = bs->opaque;
int fd, ret;
+ struct stat sb;
+ if (lstat(filename, &sb) < 0) {
+ fprintf(stderr, "%s: stat failed: %s\n", filename, strerror(errno));
+ return -errno;
+ }
+ if (S_ISLNK(sb.st_mode)) {
+ fprintf(stderr, "%s: symbolic link not supported\n", filename);
+ return -EINVAL;
+ }
+#if defined(__NetBSD__)
+ if (S_ISBLK(sb.st_mode)) {
+ static char namebuf[PATH_MAX];
+ const char *dp = strrchr(filename, '/');
+
+ if (dp == NULL) {
+ snprintf(namebuf, PATH_MAX, "r%s", filename);
+ } else {
+ snprintf(namebuf, PATH_MAX, "%.*s/r%s",
+ (int)(dp - filename), filename, dp + 1);
+ }
+ fprintf(stderr, "%s is a block device", filename);
+ filename = namebuf;
+ fprintf(stderr, ", using %s\n", filename);
+ }
+#endif
s->open_flags = open_flags | O_BINARY;
s->open_flags &= ~O_ACCMODE;
if (bdrv_flags & BDRV_O_RDWR) {
@@ -603,7 +635,7 @@ static int raw_truncate(BlockDriverState *bs, int64_t offset)
return 0;
}
-#ifdef __OpenBSD__
+#if defined(__OpenBSD__) || defined(__NetBSD__)
static int64_t raw_getlength(BlockDriverState *bs)
{
BDRVRawState *s = bs->opaque;
@@ -613,12 +645,22 @@ static int64_t raw_getlength(BlockDriverState *bs)
if (fstat(fd, &st))
return -1;
if (S_ISCHR(st.st_mode) || S_ISBLK(st.st_mode)) {
- struct disklabel dl;
+#if defined(__NetBSD__)
+ struct dkwedge_info dkw;
- if (ioctl(fd, DIOCGDINFO, &dl))
- return -1;
- return (uint64_t)dl.d_secsize *
- dl.d_partitions[DISKPART(st.st_rdev)].p_size;
+ if (ioctl(fd, DIOCGWEDGEINFO, &dkw) != -1) {
+ return dkw.dkw_size * 512;
+ } else {
+#endif
+ struct disklabel dl;
+
+ if (ioctl(fd, DIOCGDINFO, &dl))
+ return -1;
+ return (uint64_t)dl.d_secsize *
+ dl.d_partitions[DISKPART(st.st_rdev)].p_size;
+#if defined(__NetBSD__)
+ }
+#endif
} else
return st.st_size;
}
next reply other threads:[~2011-05-23 10:46 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-23 10:05 Christoph Egger [this message]
2011-05-23 10:34 ` [Qemu-devel] [PATCH] block/raw-posix: get right size of partition size Christoph Egger
2011-05-23 11:06 ` Christoph Hellwig
2011-05-23 12:26 ` Christoph Egger
-- strict thread matches above, loose matches on Subject: below --
2011-05-23 12:31 [Qemu-devel] [PATCH] block/raw-posix: get right " Christoph Egger
2011-05-25 13:50 ` Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DDA3153.4070003@amd.com \
--to=christoph.egger@amd.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.