From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arseny Klimovsky Date: Sun, 29 May 2011 13:47:18 +0000 Subject: Re: [lm-sensors] Testing results for Nuvoton W83677HG-I Message-Id: <4DE24E66.40604@gmail.com> List-Id: References: <4DD783EB.5010606@gmail.com> In-Reply-To: <4DD783EB.5010606@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: lm-sensors@vger.kernel.org Guenter Roeck пишет: > Hi Arseny, > > On Sat, May 21, 2011 at 05:20:43AM -0400, Arseny Klimovsky wrote: >> Hello list, >> >> I've tested a driver at http://www.roeck-us.net/linux/drivers/w83627ehf/ >> with my motherboard Intel DH67BL. >> >> I'm not sure what exactly should be tested, I'm most interested in fan >> speeds. >> They are correct, values are practically the same like in BIOS. >> On my board fan1 is rear fan, fan2 is CPU fan and fan3 is front fan. >> > Fan speed is the most interesting at this point, since I could not test > that myself. > > Thanks a lot for the feedback! > > Guenter With this driver I created a configuration for my board. It can be added to wiki, but I have some questions: 1. Multiplier for +12V is strange (11), but it gets exactly correct results (12.14V switching to 12.23V and back). Can this be correct? 2. Statement "ignore temp5" does not take effect. I see line about "PECI Agent 1" The sensors output with the config: nct6775-isa-0290 Adapter: ISA adapter Vcore: +1.06 V (min = +0.60 V, max = +1.60 V) +12V: +12.14 V (min = +11.09 V, max = +12.94 V) AVCC: +3.41 V (min = +2.98 V, max = +3.63 V) +3.3V: +3.41 V (min = +2.98 V, max = +3.63 V) +5V: +5.04 V (min = +4.60 V, max = +5.40 V) MemV: +1.56 V (min = +0.40 V, max = +2.00 V) PCHV: +1.06 V (min = +0.60 V, max = +1.60 V) 3VSB: +3.39 V (min = +2.98 V, max = +3.63 V) Vbat: +3.28 V (min = +2.70 V, max = +3.30 V) Rear fan: 727 RPM (min = 251 RPM, div = 32) CPU fan: 917 RPM (min = 251 RPM, div = 32) Front fan: 740 RPM (min = 251 RPM, div = 32) VR temp: +35.0°C (high = +90.0°C, hyst = +75.0°C) sensor = diode CPU temp: +35.5°C (high = +93.0°C, hyst = +75.0°C) sensor = diode Memory DIMM temp: +34.5°C (high = +90.0°C, hyst = +75.0°C) sensor = diode PCH temp: +47.0°C PECI Agent 1: +0.0°C (high = +80.0°C, hyst = +75.0°C) The configuration: # Created for board DH67BL using information from Inte Desktop Utilities and BIOS # "FRONT" and "REAR" fan labels correspond to the motherboard # headers, but not necessarily the actual fan locations. chip "nct6775-isa-0290" # Fans label fan1 "Rear fan" set fan1_min 250 # From IDU label fan2 "CPU fan" set fan2_min 250 # From IDU label fan3 "Front fan" set fan3_min 250 # From IDU # There is no fan4 on the board ignore fan4 # Voltages # Processor Vcc label in0 "Vcore" set in0_min 0.6 # From IDU set in0_max 1.6 # From IDU # This should be "12 Volts", but computations are strange label in1 "+12V" compute in1 11*@, @/11 set in1_min 11.1 # From IDU set in1_max 12.9 # From IDU # AVCC(?) - Not shown in BIOS or IDU label in2 "AVCC" set in2_min 3.0 # same as +3.3V set in2_max 3.6 # same as +3.3V # +3.3 Volts label in3 "+3.3V" set in3_min 3.0 # from IDU set in3_max 3.6 # from IDU # +5 Volts label in4 "+5V" compute in4 5*@, @/5 set in4_min 4.6 # from IDU set in4_max 5.4 # from IDU # Memory Vcc ("SDRAM Vcc" in IDU) label in5 "MemV" compute in5 1.5*@, @/1.5 set in5_min 0.4 # from IDU set in5_max 2.0 # from IDU # PCH Vcc label in6 "PCHV" set in6_min 0.6 # from IDU set in6_max 1.6 # from IDU # +3.3 Volt Standby label in7 "3VSB" set in7_min 3.0 # from IDU set in7_max 3.6 # from IDU # VBAT(?) - Not shown in BIOS or IDU label in8 "Vbat" # It shows +2.050 V, seems to be not used ignore cpu0_vid # Temperatures # Labeled as "SYSTIN" # Guess! label temp1 "VR temp" set temp1_max 90 # From IDU set temp1_max_hyst 75 # Labeled as "CPUTIN" label temp2 "CPU temp" set temp2_max 93 # From IDU set temp2_max_hyst 75 # Labeled as "PECI Agent 0" # Guess! label temp3 "Memory DIMM temp" set temp3_max 90 # From IDU set temp3_max_hyst 75 # Labeled as "PCH_CHIP_TEMP" label temp4 "PCH temp" # Labeled as "PECI Agent 1" # Not used ignore temp5 -- Arseny Klimovsky _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors