# Created for board DH67BL using information from Inte Desktop Utilities and BIOS # "FRONT" and "REAR" fan labels correspond to the motherboard # headers, but not necessarily the actual fan locations. chip "nct6775-isa-0290" # Fans label fan1 "Rear fan" set fan1_min 250 # From IDU label fan2 "CPU fan" set fan2_min 250 # From IDU label fan3 "Front fan" set fan3_min 250 # From IDU # There is no fan4 on the board ignore fan4 # Voltages # Processor Vcc label in0 "Vcore" set in0_min 0.6 # From IDU set in0_max 1.6 # From IDU # This should be "12 Volts", but computations are strange label in1 "+12V" compute in1 11*@, @/11 set in1_min 11.1 # From IDU set in1_max 12.9 # From IDU # AVCC(?) - Not shown in BIOS or IDU label in2 "AVCC" set in2_min 3.0 # same as +3.3V set in2_max 3.6 # same as +3.3V # +3.3 Volts label in3 "+3.3V" set in3_min 3.0 # from IDU set in3_max 3.6 # from IDU # +5 Volts label in4 "+5V" compute in4 5*@, @/5 set in4_min 4.6 # from IDU set in4_max 5.4 # from IDU # Memory Vcc ("SDRAM Vcc" in IDU) label in5 "MemV" compute in5 1.5*@, @/1.5 set in5_min 0.4 # from IDU set in5_max 2.0 # from IDU # PCH Vcc label in6 "PCHV" set in6_min 0.6 # from IDU set in6_max 1.6 # from IDU # +3.3 Volt Standby label in7 "3VSB" set in7_min 3.0 # from IDU set in7_max 3.6 # from IDU # VBAT(?) - Not shown in BIOS or IDU label in8 "Vbat" # It shows +2.050 V, seems to be not used ignore cpu0_vid # Temperatures # Labeled as "SYSTIN" # Guess! label temp1 "VR temp" set temp1_max 90 # From IDU set temp1_max_hyst 75 # From IDU # Labeled as "CPUTIN" label temp2 "CPU temp" set temp2_max 93 # From IDU set temp2_max_hyst 75 # From IDU # Labeled as "PECI Agent 0" # Guess! label temp3 "Memory DIMM temp" set temp3_max 90 # From IDU set temp3_max_hyst 75 # From IDU # Labeled as "PCH_CHIP_TEMP" label temp4 "PCH temp" # Labeled as "PECI Agent 1" # Not used ignore temp8