All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: Lutz Sammer <johns98@gmx.net>
Cc: linux-media@vger.kernel.org, Manu Abraham <abraham.manu@gmail.com>
Subject: Re: [PATCH] stb0899: Fix not locking DVB-S transponder
Date: Wed, 01 Jun 2011 12:00:40 -0300	[thread overview]
Message-ID: <4DE65418.1050508@redhat.com> (raw)
In-Reply-To: <4DC135E5.40805@gmx.net>

Manu,

Please review.

Lutz,

scripts/checkpatch.pl complains about a few bad style used on your patches:

ERROR: space prohibited after that open parenthesis '('
#42: FILE: drivers/media/dvb/frontends/stb0899_algo.c:343:
+	if ( !lock ) {

ERROR: space prohibited before that close parenthesis ')'
#42: FILE: drivers/media/dvb/frontends/stb0899_algo.c:343:
+	if ( !lock ) {

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+		msleep(1);
WARNING: line over 80 characters
#90: FILE: drivers/media/dvb/frontends/stb0899_algo.c:365:
+		stb0899_write_reg(state, STB0899_DSTATUS2, 0x00); /* force search loop	*/

WARNING: line over 80 characters
#92: FILE: drivers/media/dvb/frontends/stb0899_algo.c:367:
+			/* WARNING! VIT LOCKED has to be tested before VIT_END_LOOOP	*/

ERROR: trailing whitespace
#96: FILE: drivers/media/dvb/frontends/stb0899_algo.c:371:
+^I$

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+			msleep(1);
total: 3 errors, 4 warnings, 69 lines checked

NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or
      scripts/cleanfile

The warnings are trivial. I can fix it when applying it, after having Manu's
ack on that patch, but the better is for you to always check your patches with
checkpatch.pl.


Em 04-05-2011 08:17, Lutz Sammer escreveu:
> stb0899: Fix not locking DVB-S transponder
> 
> When stb0899_check_data is entered, it could happen, that the data is
> already locked and the data search looped.  stb0899_check_data fails to
> lock on a good frequency.  stb0899_search_data uses an extrem big search
> step and fails to lock.
> 
> The new code checks for lock before starting a new search.
> The first read ignores the loop bit, for the case that the loop bit is
> set during the search setup.  I also added the msleep to reduce the
> traffic on the i2c bus.
> 
> Resend, last version seems to be broken by email-client.
> 
> Johns
> 
> Signed-off-by: Lutz Sammer <johns98@gmx.net>
> 
> 
> stb0899_not_locking_fix.diff
> 
> 
> diff --git a/drivers/media/dvb/frontends/stb0899_algo.c b/drivers/media/dvb/frontends/stb0899_algo.c
> index 2da55ec..55f0c4e 100644
> --- a/drivers/media/dvb/frontends/stb0899_algo.c
> +++ b/drivers/media/dvb/frontends/stb0899_algo.c
> @@ -338,36 +338,42 @@ static enum stb0899_status stb0899_check_data(struct stb0899_state *state)
>  	int lock = 0, index = 0, dataTime = 500, loop;
>  	u8 reg;
>  
> -	internal->status = NODATA;
> +	reg = stb0899_read_reg(state, STB0899_VSTATUS);
> +	lock = STB0899_GETFIELD(VSTATUS_LOCKEDVIT, reg);
> +	if ( !lock ) {
>  
> -	/* RESET FEC	*/
> -	reg = stb0899_read_reg(state, STB0899_TSTRES);
> -	STB0899_SETFIELD_VAL(FRESACS, reg, 1);
> -	stb0899_write_reg(state, STB0899_TSTRES, reg);
> -	msleep(1);
> -	reg = stb0899_read_reg(state, STB0899_TSTRES);
> -	STB0899_SETFIELD_VAL(FRESACS, reg, 0);
> -	stb0899_write_reg(state, STB0899_TSTRES, reg);
> +		internal->status = NODATA;
>  
> -	if (params->srate <= 2000000)
> -		dataTime = 2000;
> -	else if (params->srate <= 5000000)
> -		dataTime = 1500;
> -	else if (params->srate <= 15000000)
> -		dataTime = 1000;
> -	else
> -		dataTime = 500;
> -
> -	stb0899_write_reg(state, STB0899_DSTATUS2, 0x00); /* force search loop	*/
> -	while (1) {
> -		/* WARNING! VIT LOCKED has to be tested before VIT_END_LOOOP	*/
> -		reg = stb0899_read_reg(state, STB0899_VSTATUS);
> -		lock = STB0899_GETFIELD(VSTATUS_LOCKEDVIT, reg);
> -		loop = STB0899_GETFIELD(VSTATUS_END_LOOPVIT, reg);
> +		/* RESET FEC	*/
> +		reg = stb0899_read_reg(state, STB0899_TSTRES);
> +		STB0899_SETFIELD_VAL(FRESACS, reg, 1);
> +		stb0899_write_reg(state, STB0899_TSTRES, reg);
> +		msleep(1);
> +		reg = stb0899_read_reg(state, STB0899_TSTRES);
> +		STB0899_SETFIELD_VAL(FRESACS, reg, 0);
> +		stb0899_write_reg(state, STB0899_TSTRES, reg);
>  
> -		if (lock || loop || (index > dataTime))
> -			break;
> -		index++;
> +		if (params->srate <= 2000000)
> +			dataTime = 2000;
> +		else if (params->srate <= 5000000)
> +			dataTime = 1500;
> +		else if (params->srate <= 15000000)
> +			dataTime = 1000;
> +		else
> +			dataTime = 500;
> +
> +		stb0899_write_reg(state, STB0899_DSTATUS2, 0x00); /* force search loop	*/
> +		while (1) {
> +			/* WARNING! VIT LOCKED has to be tested before VIT_END_LOOOP	*/
> +			reg = stb0899_read_reg(state, STB0899_VSTATUS);
> +			lock = STB0899_GETFIELD(VSTATUS_LOCKEDVIT, reg);
> +			loop = STB0899_GETFIELD(VSTATUS_END_LOOPVIT, reg);
> +	
> +			if (lock || (loop && index) || (index > dataTime))
> +				break;
> +			index++;
> +			msleep(1);
> +		}
>  	}
>  
>  	if (lock) {	/* DATA LOCK indicator	*/


      reply	other threads:[~2011-06-01 15:00 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-04 11:17 [PATCH] stb0899: Fix not locking DVB-S transponder Lutz Sammer
2011-06-01 15:00 ` Mauro Carvalho Chehab [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4DE65418.1050508@redhat.com \
    --to=mchehab@redhat.com \
    --cc=abraham.manu@gmail.com \
    --cc=johns98@gmx.net \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.