All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bear <jilingshu@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] How to boot a newer version of u-boot from a older one?
Date: Sun, 05 Jun 2011 18:00:09 +0800	[thread overview]
Message-ID: <4DEB53A9.3010403@Gmail.com> (raw)
In-Reply-To: <45903308677306428B6EE7E6FF5A520413BA81@039-SN1MPN1-004.039d.mgd.msft.net>

hi,
Could you tell me which configuration should I use? There are 4 
configurations for MPC8313ERDB...
 >> MPC8313ERDB_33               powerpc     mpc83xx     mpc8313erdb 
freescale      -           MPC8313ERDB:SYS_33MHZ
 >> MPC8313ERDB_66               powerpc     mpc83xx     mpc8313erdb 
freescale      -           MPC8313ERDB:SYS_66MHZ
 >> MPC8313ERDB_NAND_33          powerpc     mpc83xx     mpc8313erdb 
freescale      -           MPC8313ERDB:SYS_33MHZ,NAND_U_BOOT
 >> MPC8313ERDB_NAND_66          powerpc     mpc83xx     mpc8313erdb 
freescale      -           MPC8313ERDB:SYS_66MHZ,NAND_U_BOOT
 >

??????????????????????

On 6/5/2011 3:14 PM, Aggrwal Poonam-B10812 wrote:
> I am not sure of the correct make option though, but you must try flashing NAND flash with NAND boot loader and do experiments there.
> It would be good not to tamper with the existing NOR boot loader for now.
> =>  tftp 1000000 u-boot-nand.bin
> =>  nand erase 0 80000
> =>  nand write 1000000 0 80000
>
> Switch off the board.
> Change the switch settings to boot from NAND.
> And switch on the board.
>
> Regards
> Poonam
>
>> -----Original Message-----
>> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
>> On Behalf Of Lingfeng Xiong
>> Sent: Sunday, June 05, 2011 12:24 PM
>> To: u-boot at lists.denx.de
>> Subject: [U-Boot] How to boot a newer version of u-boot from a older one?
>>
>> hi there,
>> I bought a Freescale MPC8313E-RDB some days before. The version of u-boot
>> on that board is quite old and I wanna run a newer one. I have already
>> built the latest git version of u-boot for that board. But I found there
>> are several configuration files:
>>> MPC8313ERDB_33               powerpc     mpc83xx     mpc8313erdb
>> freescale      -           MPC8313ERDB:SYS_33MHZ
>>> MPC8313ERDB_66               powerpc     mpc83xx     mpc8313erdb
>> freescale      -           MPC8313ERDB:SYS_66MHZ
>>> MPC8313ERDB_NAND_33          powerpc     mpc83xx     mpc8313erdb
>> freescale      -           MPC8313ERDB:SYS_33MHZ,NAND_U_BOOT
>>> MPC8313ERDB_NAND_66          powerpc     mpc83xx     mpc8313erdb
>> freescale      -           MPC8313ERDB:SYS_66MHZ,NAND_U_BOOT
>>
>> My board is Rev C and all switches are in factory default, could you tell
>> me which configuration should I use?
>>
>> For I have no USBTAP, there are no way for me to flush either NOR Flash
>> or NAND Flash, so I am afraid if I install my u-boot to NOR Flash and
>> that u-boot cannot run correctly, my board would be unavailable. So I
>> wanna boot the latest version of u-boot from the original one. I tried
>> these:
>> =>  tftp 0x01000000 u-boot.bin
>> =>  go 0x01000000
>>
>> But my board reset automatically. Could you tell me how to do with this?
>> Thanks.
>>
>>
>>
>> --
>> ??????????????????????
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot

  parent reply	other threads:[~2011-06-05 10:00 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-05  6:54 [U-Boot] How to boot a newer version of u-boot from a older one? Lingfeng Xiong
     [not found] ` <45903308677306428B6EE7E6FF5A520413BA81@039-SN1MPN1-004.039d.mgd.msft.net>
2011-06-05 10:00   ` Bear [this message]
     [not found] ` <20110605071357.9BF74184CAD6@gemini.denx.de>
     [not found]   ` <4DEB3B83.8010608@Gmail.com>
2011-06-05 19:37     ` Wolfgang Denk
2011-06-06  1:34       ` Bear
2011-06-06 18:50 ` Scott Wood
2011-06-07  5:12   ` Bear
2011-06-07  5:46     ` McClintock Matthew-B29882
2011-06-07  6:08       ` Bear

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4DEB53A9.3010403@Gmail.com \
    --to=jilingshu@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.