XC5000 and MB86A20S - Alfredo Jesús Delaiti

All of lore.kernel.org
 help / color / mirror / Atom feed

From: "Alfredo Jesús Delaiti" <alfredodelaiti@netscape.net>
To: linux-media@vger.kernel.org
Subject: XC5000 and MB86A20S
Date: Thu, 09 Jun 2011 19:22:07 -0300	[thread overview]
Message-ID: <4DF1478F.4080007@netscape.net> (raw)

Hi


I'm trying to run the X8507 MyGica plate, as I said in another post.
I notice that when I try to tune a channel, the frequency of the XC5000 
is different from the central carrier as I would expect to happen. Is 
this normal?
Can someone tell me where is the documentation of the XC5000 and MB86A20S.
Below are the results I get.


Thanks in advance



Alfredo


alfredo@linux:~> mplayer -dumpstream dvb://'Encuentro' -dumpfile 
mplayer-dumpfile.ts

MPlayer dev-SVN-r33321-4.5-openSUSE Linux 11.4 (x86_64)-Packman (C) 
2000-2011 MPlayer Team

Can't open joystick device /dev/input/js0: No such file or directory

Can't init input joystick

mplayer: could not open config files /home/alfredo/.lircrc and 
/etc/lirc/lircrc

mplayer: No such file or directory

Failed to read LIRC config file ~/.lircrc.

Loading extension-related profile 'vo.vdpau'


Playing dvb://Encuentro.

dvb_tune Freq: 521142857

dvb_streaming_read, attempt N. 6 failed with errno 0 when reading 544 bytes

dvb_streaming_read, attempt N. 6 failed with errno 0 when reading 900 bytes

dvb_streaming_read, attempt N. 5 failed with errno 0 when reading 148 bytes

dvb_streaming_read, attempt N. 6 failed with errno 0 when reading 1256 bytes

dvb_streaming_read, attempt N. 5 failed with errno 0 when reading 1256 bytes



dmesg:


[ 2235.637152] mb86a20s: mb86a20s_initfe:

[ 2235.722354] mb86a20s: mb86a20s_initfe: Initialization succeeded.

[ 2235.722704] xc5000: xc5000_init()

[ 2235.723435] xc5000: xc5000_is_firmware_loaded() returns True id = 0x1388

[ 2235.723437] xc5000: xc_initialize()

[ 2235.963737] xc5000: *** ADC envelope (0-1023) = 152

[ 2235.964451] xc5000: *** Frequency error = 62 Hz

[ 2235.965163] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2

[ 2235.966642] xc5000: *** HW: V03.02, FW: V01.06.0072

[ 2235.967376] xc5000: *** Horizontal sync frequency = 16526 Hz

[ 2235.968088] xc5000: *** Frame lines = 570

[ 2235.968851] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0

[ 2236.069395] mb86a20s: mb86a20s_set_frontend:

[ 2236.069749] mb86a20s: mb86a20s_set_frontend: Calling tuner set parameters

[ 2236.070487] xc5000: xc5000_is_firmware_loaded() returns True id = 0x1388

[ 2236.070493] xc5000: xc5000_set_params() frequency=521142857 (Hz)

[ 2236.070497] xc5000: xc5000_set_params() OFDM

[ 2236.070501] xc5000: xc5000_set_params() frequency=519392857 (compensated)

[ 2236.070505] xc5000: xc_SetSignalSource(0) Source = ANTENNA

[ 2236.071793] xc5000: xc_SetTVStandard(0x8002,0x00c0)

[ 2236.071796] xc5000: xc_SetTVStandard() Standard = DTV6

[ 2236.081039] xc5000: xc_set_IF_frequency(freq_khz = 3300) freq_code = 
0xd33

[ 2236.089762] xc5000: xc_tune_channel(519392857)

[ 2236.089764] xc5000: xc_set_RF_frequency(519392857)

[ 2236.342767] xc5000: *** ADC envelope (0-1023) = 932

[ 2236.343502] xc5000: *** Frequency error = 0 Hz

[ 2236.344204] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1

[ 2236.345670] xc5000: *** HW: V03.02, FW: V01.06.0072

[ 2236.346399] xc5000: *** Horizontal sync frequency = 15404 Hz

[ 2236.347129] xc5000: *** Frame lines = 65535

[ 2236.347925] xc5000: *** Quality (0:<8dB, 7:>56dB) = 1

[ 2236.350019] mb86a20s: mb86a20s_read_status:

[ 2236.351208] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01

[ 2236.361292] mb86a20s: mb86a20s_read_status:

[ 2236.362471] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01

[ 2236.372549] mb86a20s: mb86a20s_read_status:

[ 2236.373716] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01

[ 2236.383789] mb86a20s: mb86a20s_read_status:

[ 2236.384970] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01

[ 2236.395049] mb86a20s: mb86a20s_read_status:

[ 2236.396235] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01

[ 2236.400035] mb86a20s: mb86a20s_read_status:

[ 2236.401226] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01

[ 2236.401233] mb86a20s: mb86a20s_set_frontend:

[ 2236.401581] mb86a20s: mb86a20s_set_frontend: Calling tuner set parameters

[ 2236.402298] xc5000: xc5000_is_firmware_loaded() returns True id = 0x1388

[ 2236.402303] xc5000: xc5000_set_params() frequency=521267857 (Hz)

[ 2236.402306] xc5000: xc5000_set_params() OFDM

[ 2236.402310] xc5000: xc5000_set_params() frequency=519517857 (compensated)

[ 2236.402314] xc5000: xc_SetSignalSource(0) Source = ANTENNA

[ 2236.403608] xc5000: xc_SetTVStandard(0x8002,0x00c0)

[ 2236.403611] xc5000: xc_SetTVStandard() Standard = DTV6

[ 2236.412019] xc5000: xc_set_IF_frequency(freq_khz = 3300) freq_code = 
0xd33

[ 2236.420733] xc5000: xc_tune_channel(519517857)

[ 2236.420735] xc5000: xc_set_RF_frequency(519517857)

[ 2236.625772] xc5000: *** ADC envelope (0-1023) = 896

[ 2236.626507] xc5000: *** Frequency error = 0 Hz

[ 2236.627241] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1

[ 2236.628709] xc5000: *** HW: V03.02, FW: V01.06.0072

[ 2236.629443] xc5000: *** Horizontal sync frequency = 15641 Hz

[ 2236.630178] xc5000: *** Frame lines = 65535

[ 2236.630941] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5

[ 2236.633036] mb86a20s: mb86a20s_read_status:

[ 2236.634252] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01

[ 2236.644330] mb86a20s: mb86a20s_read_status:

[ 2236.645509] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01

[ 2236.655587] mb86a20s: mb86a20s_read_status:

[ 2236.656747] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01

[ 2236.666879] mb86a20s: mb86a20s_read_status:

[ 2236.668062] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01

[ 2236.678140] mb86a20s: mb86a20s_read_status:

[ 2236.679334] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01

[ 2236.683021] mb86a20s: mb86a20s_read_status:

[ 2236.684202] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01

[ 2236.684207] mb86a20s: mb86a20s_set_frontend:

[ 2236.684554] mb86a20s: mb86a20s_set_frontend: Calling tuner set parameters

[ 2236.685260] xc5000: xc5000_is_firmware_loaded() returns True id = 0x1388

[ 2236.685262] xc5000: xc5000_set_params() frequency=521017857 (Hz)

[ 2236.685263] xc5000: xc5000_set_params() OFDM

[ 2236.685265] xc5000: xc5000_set_params() frequency=519267857 (compensated)

[ 2236.685267] xc5000: xc_SetSignalSource(0) Source = ANTENNA

[ 2236.686546] xc5000: xc_SetTVStandard(0x8002,0x00c0)

[ 2236.686548] xc5000: xc_SetTVStandard() Standard = DTV6

[ 2236.695018] xc5000: xc_set_IF_frequency(freq_khz = 3300) freq_code = 
0xd33

[ 2236.703742] xc5000: xc_tune_channel(519267857)

[ 2236.703744] xc5000: xc_set_RF_frequency(519267857)

[ 2236.908773] xc5000: *** ADC envelope (0-1023) = 856

[ 2236.909507] xc5000: *** Frequency error = 0 Hz

[ 2236.910207] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1

[ 2236.911676] xc5000: *** HW: V03.02, FW: V01.06.0072

[ 2236.912410] xc5000: *** Horizontal sync frequency = 15771 Hz

[ 2236.913155] xc5000: *** Frame lines = 65535

[ 2236.913918] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5

[ 2236.916030] mb86a20s: mb86a20s_read_status:

[ 2236.917228] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01

[ 2236.927307] mb86a20s: mb86a20s_read_status:

[ 2236.928480] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01

…

[ 2239.576593] mb86a20s: mb86a20s_set_frontend: Calling tuner set parameters

[ 2239.577334] xc5000: xc5000_is_firmware_loaded() returns True id = 0x1388

[ 2239.577339] xc5000: xc5000_set_params() frequency=521017857 (Hz)

[ 2239.577342] xc5000: xc5000_set_params() OFDM

[ 2239.577346] xc5000: xc5000_set_params() frequency=519267857 (compensated)

[ 2239.577350] xc5000: xc_SetSignalSource(0) Source = ANTENNA

[ 2239.578642] xc5000: xc_SetTVStandard(0x8002,0x00c0)

[ 2239.578646] xc5000: xc_SetTVStandard() Standard = DTV6

[ 2239.587031] xc5000: xc_set_IF_frequency(freq_khz = 3300) freq_code = 
0xd33

[ 2239.595735] xc5000: xc_tune_channel(519267857)

[ 2239.595737] xc5000: xc_set_RF_frequency(519267857)

[ 2239.800841] xc5000: *** ADC envelope (0-1023) = 916

[ 2239.801577] xc5000: *** Frequency error = 0 Hz

[ 2239.802277] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1

[ 2239.803748] xc5000: *** HW: V03.02, FW: V01.06.0072

[ 2239.804454] xc5000: *** Horizontal sync frequency = 15870 Hz

[ 2239.805156] xc5000: *** Frame lines = 1023

[ 2239.805915] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5

[ 2239.808007] mb86a20s: mb86a20s_read_status:

[ 2239.809282] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01

…

[ 2253.026267] mb86a20s: mb86a20s_read_status: val = 9, status = 0x1f

[ 2253.940496] xc5000: xc5000_sleep()

[ 2253.940504] xc5000: xc5000_TunerReset()

-- 
Dona tu voz
http://www.voxforge.org/es

                 reply	other threads:[~2011-06-09 22:22 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4DF1478F.4080007@netscape.net \
    --to=alfredodelaiti@netscape.net \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.