From: zaverel <zaverel@free.fr>
To: dri-devel@lists.freedesktop.org
Subject: nouveau Ignoring invalid EDID block 1 xrandr can't change resolution on monitor two (dualdisplay)
Date: Tue, 14 Jun 2011 12:58:00 +0200 [thread overview]
Message-ID: <4DF73EB8.6000206@free.fr> (raw)
[-- Attachment #1: Type: text/plain, Size: 473 bytes --]
Hello ,
All is fine except i can't change resolution on my second monitor vga
(reported as DVI-I-2 )
(tv in fact) anymore
with my 9400gt.
Now , i'm on :
linux-2.6.39-gentoo-r1
xorg-server-1.10.2
xf86-video-nouveau-0.0.16_pre20110323
libdrm-2.4.25
whatever i valid with xrandr is not really do on my tv
although xrandr say it's good , my tv always report 1202x670 50hz
I tried with and without xorg.conf
My last kernel working is linux-2.6.36-gentoo-r6.
see you.
[-- Attachment #2: Xorg.0.log --]
[-- Type: text/plain, Size: 46566 bytes --]
[ 17.528]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[ 17.528] X Protocol Version 11, Revision 0
[ 17.528] Build Operating System: Linux 2.6.36-test x86_64 Gentoo
[ 17.528] Current Operating System: Linux funky64 2.6.39-gentoo-r1 #1 SMP PREEMPT Fri Jun 10 17:18:16 CEST 2011 x86_64
[ 17.528] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-gentoo-r1 root=/dev/sda1 ro rootfstype=ext4 log_buf_len=1M
[ 17.528] Build Date: 10 June 2011 01:16:32PM
[ 17.528]
[ 17.528] Current version of pixman: 0.22.0
[ 17.528] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17.528] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17.528] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 10 18:16:30 2011
[ 17.599] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 17.599] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 17.689] (==) No Layout section. Using the first Screen section.
[ 17.689] (==) No screen section available. Using defaults.
[ 17.689] (**) |-->Screen "Default Screen Section" (0)
[ 17.689] (**) | |-->Monitor "<default monitor>"
[ 17.689] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 17.689] (==) Automatically adding devices
[ 17.690] (==) Automatically enabling devices
[ 17.714] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 17.714] Entry deleted from font path.
[ 17.714] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 17.714] Entry deleted from font path.
[ 17.758] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 17.758] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 17.758] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 17.758] (II) Loader magic: 0x7d60a0
[ 17.758] (II) Module ABI versions:
[ 17.758] X.Org ANSI C Emulation: 0.4
[ 17.758] X.Org Video Driver: 10.0
[ 17.758] X.Org XInput driver : 12.2
[ 17.758] X.Org Server Extension : 5.0
[ 17.759] (--) PCI:*(0:2:0:0) 10de:0641:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/524288
[ 17.759] (II) Open ACPI successful (/var/run/acpid.socket)
[ 17.759] (II) LoadModule: "extmod"
[ 17.834] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 17.851] (II) Module extmod: vendor="X.Org Foundation"
[ 17.851] compiled for 1.10.2, module version = 1.0.0
[ 17.851] Module class: X.Org Server Extension
[ 17.851] ABI class: X.Org Server Extension, version 5.0
[ 17.851] (II) Loading extension MIT-SCREEN-SAVER
[ 17.851] (II) Loading extension XFree86-VidModeExtension
[ 17.851] (II) Loading extension XFree86-DGA
[ 17.851] (II) Loading extension DPMS
[ 17.851] (II) Loading extension XVideo
[ 17.851] (II) Loading extension XVideo-MotionCompensation
[ 17.851] (II) Loading extension X-Resource
[ 17.851] (II) LoadModule: "dbe"
[ 17.852] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 17.852] (II) Module dbe: vendor="X.Org Foundation"
[ 17.853] compiled for 1.10.2, module version = 1.0.0
[ 17.853] Module class: X.Org Server Extension
[ 17.853] ABI class: X.Org Server Extension, version 5.0
[ 17.853] (II) Loading extension DOUBLE-BUFFER
[ 17.853] (II) LoadModule: "glx"
[ 17.853] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 17.864] (II) Module glx: vendor="X.Org Foundation"
[ 17.864] compiled for 1.10.2, module version = 1.0.0
[ 17.864] ABI class: X.Org Server Extension, version 5.0
[ 17.864] (==) AIGLX enabled
[ 17.864] (II) Loading extension GLX
[ 17.864] (II) LoadModule: "record"
[ 17.864] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 17.873] (II) Module record: vendor="X.Org Foundation"
[ 17.873] compiled for 1.10.2, module version = 1.13.0
[ 17.873] Module class: X.Org Server Extension
[ 17.873] ABI class: X.Org Server Extension, version 5.0
[ 17.873] (II) Loading extension RECORD
[ 17.873] (II) LoadModule: "dri"
[ 17.873] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 17.896] (II) Module dri: vendor="X.Org Foundation"
[ 17.896] compiled for 1.10.2, module version = 1.0.0
[ 17.896] ABI class: X.Org Server Extension, version 5.0
[ 17.896] (II) Loading extension XFree86-DRI
[ 17.896] (II) LoadModule: "dri2"
[ 17.896] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 17.897] (II) Module dri2: vendor="X.Org Foundation"
[ 17.897] compiled for 1.10.2, module version = 1.2.0
[ 17.897] ABI class: X.Org Server Extension, version 5.0
[ 17.897] (II) Loading extension DRI2
[ 17.897] (==) Matched nouveau as autoconfigured driver 0
[ 17.897] (==) Matched vesa as autoconfigured driver 1
[ 17.897] (==) Matched fbdev as autoconfigured driver 2
[ 17.897] (==) Assigned the driver to the xf86ConfigLayout
[ 17.897] (II) LoadModule: "nouveau"
[ 17.897] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 17.985] (II) Module nouveau: vendor="X.Org Foundation"
[ 17.985] compiled for 1.10.2, module version = 0.0.16
[ 17.985] Module class: X.Org Video Driver
[ 17.985] ABI class: X.Org Video Driver, version 10.0
[ 17.985] (II) LoadModule: "vesa"
[ 18.002] (WW) Warning, couldn't open module vesa
[ 18.002] (II) UnloadModule: "vesa"
[ 18.002] (II) Unloading vesa
[ 18.002] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 18.002] (II) LoadModule: "fbdev"
[ 18.002] (WW) Warning, couldn't open module fbdev
[ 18.002] (II) UnloadModule: "fbdev"
[ 18.002] (II) Unloading fbdev
[ 18.002] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 18.002] (II) NOUVEAU driver
[ 18.002] (II) NOUVEAU driver for NVIDIA chipset families :
[ 18.002] RIVA TNT (NV04)
[ 18.002] RIVA TNT2 (NV05)
[ 18.002] GeForce 256 (NV10)
[ 18.002] GeForce 2 (NV11, NV15)
[ 18.002] GeForce 4MX (NV17, NV18)
[ 18.002] GeForce 3 (NV20)
[ 18.002] GeForce 4Ti (NV25, NV28)
[ 18.003] GeForce FX (NV3x)
[ 18.003] GeForce 6 (NV4x)
[ 18.003] GeForce 7 (G7x)
[ 18.003] GeForce 8 (G8x)
[ 18.003] GeForce GTX 200 (NVA0)
[ 18.003] GeForce GTX 400 (NVC0)
[ 18.003] (++) using VT number 7
[ 18.005] drmOpenDevice: node name is /dev/dri/card0
[ 18.005] drmOpenDevice: open result is 8, (OK)
[ 18.005] drmOpenByBusid: Searching for BusID pci:0000:02:00.0
[ 18.005] drmOpenDevice: node name is /dev/dri/card0
[ 18.005] drmOpenDevice: open result is 8, (OK)
[ 18.005] drmOpenByBusid: drmOpenMinor returns 8
[ 18.005] drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
[ 18.005] (II) [drm] nouveau interface version: 0.0.16
[ 18.005] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 18.005] (II) Loading sub module "dri"
[ 18.005] (II) LoadModule: "dri"
[ 18.005] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 18.005] (II) Module dri: vendor="X.Org Foundation"
[ 18.005] compiled for 1.10.2, module version = 1.0.0
[ 18.005] ABI class: X.Org Server Extension, version 5.0
[ 18.005] (II) NOUVEAU(0): Loaded DRI module
[ 18.005] drmOpenDevice: node name is /dev/dri/card0
[ 18.005] drmOpenDevice: open result is 9, (OK)
[ 18.005] drmOpenDevice: node name is /dev/dri/card0
[ 18.005] drmOpenDevice: open result is 9, (OK)
[ 18.005] drmOpenByBusid: Searching for BusID pci:0000:02:00.0
[ 18.005] drmOpenDevice: node name is /dev/dri/card0
[ 18.005] drmOpenDevice: open result is 9, (OK)
[ 18.005] drmOpenByBusid: drmOpenMinor returns 9
[ 18.005] drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
[ 18.005] (II) [drm] DRM interface version 1.4
[ 18.006] (II) [drm] DRM open master succeeded.
[ 18.006] (--) NOUVEAU(0): Chipset: "NVIDIA NV96"
[ 18.006] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.006] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 18.006] (==) NOUVEAU(0): RGB weight 888
[ 18.006] (==) NOUVEAU(0): Default visual is TrueColor
[ 18.006] (==) NOUVEAU(0): Using HW cursor
[ 18.006] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 18.006] (==) NOUVEAU(0): Page flipping enabled
[ 18.140] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 18.669] (II) NOUVEAU(0): Output DVI-I-2 has no monitor section
[ 18.774] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 18.774] (II) NOUVEAU(0): Manufacturer: ACR Model: ad74 Serial#: 1684015472
[ 18.774] (II) NOUVEAU(0): Year: 2006 Week: 46
[ 18.774] (II) NOUVEAU(0): EDID Version: 1.3
[ 18.774] (II) NOUVEAU(0): Digital Display Input
[ 18.774] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 18.774] (II) NOUVEAU(0): Gamma: 2.20
[ 18.774] (II) NOUVEAU(0): DPMS capabilities: Off
[ 18.774] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 18.774] (II) NOUVEAU(0): Default color space is primary color space
[ 18.774] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 18.774] (II) NOUVEAU(0): redX: 0.644 redY: 0.348 greenX: 0.286 greenY: 0.603
[ 18.774] (II) NOUVEAU(0): blueX: 0.143 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 18.774] (II) NOUVEAU(0): Supported established timings:
[ 18.774] (II) NOUVEAU(0): 720x400@70Hz
[ 18.774] (II) NOUVEAU(0): 640x480@60Hz
[ 18.774] (II) NOUVEAU(0): 640x480@67Hz
[ 18.774] (II) NOUVEAU(0): 640x480@72Hz
[ 18.774] (II) NOUVEAU(0): 640x480@75Hz
[ 18.774] (II) NOUVEAU(0): 800x600@56Hz
[ 18.774] (II) NOUVEAU(0): 800x600@60Hz
[ 18.774] (II) NOUVEAU(0): 800x600@72Hz
[ 18.774] (II) NOUVEAU(0): 800x600@75Hz
[ 18.774] (II) NOUVEAU(0): 832x624@75Hz
[ 18.774] (II) NOUVEAU(0): 1024x768@60Hz
[ 18.774] (II) NOUVEAU(0): 1024x768@70Hz
[ 18.774] (II) NOUVEAU(0): 1024x768@75Hz
[ 18.774] (II) NOUVEAU(0): 1280x1024@75Hz
[ 18.774] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 18.774] (II) NOUVEAU(0): Supported standard timings:
[ 18.774] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 18.774] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 18.774] (II) NOUVEAU(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 18.774] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 18.774] (II) NOUVEAU(0): #4: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 18.774] (II) NOUVEAU(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 18.774] (II) NOUVEAU(0): #6: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 18.774] (II) NOUVEAU(0): #7: hsize: 1360 vsize 765 refresh: 60 vid: 49291
[ 18.774] (II) NOUVEAU(0): Supported detailed timing:
[ 18.774] (II) NOUVEAU(0): clock: 146.2 MHz Image Size: 473 x 296 mm
[ 18.774] (II) NOUVEAU(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 18.774] (II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 18.774] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 165 MHz
[ 18.774] (II) NOUVEAU(0): Monitor name: Acer AL2216W
[ 18.774] (II) NOUVEAU(0): Serial No: L74090463820
[ 18.774] (II) NOUVEAU(0): EDID (in hex):
[ 18.774] (II) NOUVEAU(0): 00ffffffffffff00047274ad70096064
[ 18.774] (II) NOUVEAU(0): 2e100103e82f1e782ec585a459499a24
[ 18.774] (II) NOUVEAU(0): 125054bfef0081808140714f9500950f
[ 18.774] (II) NOUVEAU(0): b30081c08bc021399030621a274068b0
[ 18.774] (II) NOUVEAU(0): 3600d9281100001c000000fd00384c1e
[ 18.774] (II) NOUVEAU(0): 5210000a202020202020000000fc0041
[ 18.774] (II) NOUVEAU(0): 63657220414c32323136570a000000ff
[ 18.774] (II) NOUVEAU(0): 004c373430393034363338323020002f
[ 18.774] (II) NOUVEAU(0): EDID vendor "ACR", prod id 44404
[ 18.786] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 18.786] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 18.786] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 18.786] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1366x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 18.786] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 18.786] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1360x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 19.290] (II) NOUVEAU(0): EDID for output DVI-I-2
[ 19.290] (II) NOUVEAU(0): Manufacturer: BEK Model: 3233 Serial#: 51100001
[ 19.290] (II) NOUVEAU(0): Year: 2005 Week: 49
[ 19.290] (II) NOUVEAU(0): EDID Version: 1.3
[ 19.290] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 19.290] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
[ 19.290] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 70 vert.: 40
[ 19.290] (II) NOUVEAU(0): Gamma: 2.20
[ 19.290] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[ 19.290] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 19.291] (II) NOUVEAU(0): redX: 0.648 redY: 0.331 greenX: 0.276 greenY: 0.601
[ 19.291] (II) NOUVEAU(0): blueX: 0.142 blueY: 0.074 whiteX: 0.282 whiteY: 0.293
[ 19.291] (II) NOUVEAU(0): Supported established timings:
[ 19.291] (II) NOUVEAU(0): 720x400@70Hz
[ 19.291] (II) NOUVEAU(0): 640x480@60Hz
[ 19.291] (II) NOUVEAU(0): 640x480@67Hz
[ 19.291] (II) NOUVEAU(0): 640x480@72Hz
[ 19.291] (II) NOUVEAU(0): 640x480@75Hz
[ 19.291] (II) NOUVEAU(0): 800x600@56Hz
[ 19.291] (II) NOUVEAU(0): 800x600@60Hz
[ 19.291] (II) NOUVEAU(0): 800x600@72Hz
[ 19.291] (II) NOUVEAU(0): 800x600@75Hz
[ 19.291] (II) NOUVEAU(0): 832x624@75Hz
[ 19.291] (II) NOUVEAU(0): 1024x768@60Hz
[ 19.291] (II) NOUVEAU(0): 1024x768@70Hz
[ 19.291] (II) NOUVEAU(0): 1024x768@75Hz
[ 19.291] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 19.291] (II) NOUVEAU(0): Supported detailed timing:
[ 19.291] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 708 x 398 mm
[ 19.291] (II) NOUVEAU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 19.291] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 19.291] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 61 kHz, PixClock max 85 MHz
[ 19.291] (II) NOUVEAU(0): Serial No: 525000000
[ 19.291] (II) NOUVEAU(0): Monitor name: BEKO-VJAZ1
[ 19.291] (II) NOUVEAU(0): EDID (in hex):
[ 19.291] (II) NOUVEAU(0): 00ffffffffffff0008ab333261b90b03
[ 19.291] (II) NOUVEAU(0): 310f01030e4628782a3f44a654469924
[ 19.291] (II) NOUVEAU(0): 13484bbfee0001010101010101010101
[ 19.291] (II) NOUVEAU(0): 010101010101011d00bc52d01e20b828
[ 19.291] (II) NOUVEAU(0): 5540c48e2100001e000000fd00384c1f
[ 19.291] (II) NOUVEAU(0): 3d08000a202020202020000000ff0035
[ 19.291] (II) NOUVEAU(0): 32353030303030300a202020000000fc
[ 19.291] (II) NOUVEAU(0): 0042454b4f2d564a415a310a2020006d
[ 19.291] (II) NOUVEAU(0): Printing probed modes for output DVI-I-2
[ 19.291] (II) NOUVEAU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 19.291] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 19.291] (II) NOUVEAU(0): Output DVI-I-2 connected
[ 19.291] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 19.291] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1280x720
[ 19.291] (II) NOUVEAU(0): Output DVI-I-2 using initial mode 1280x720
[ 19.291] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 19.291] (--) NOUVEAU(0): Virtual size is 1280x720 (pitch 0)
[ 19.291] (**) NOUVEAU(0): Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 37.5 kHz, 50.0 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 19.291] (**) NOUVEAU(0): Display dimensions: (470, 300) mm
[ 19.291] (**) NOUVEAU(0): DPI set to (69, 60)
[ 19.291] (II) Loading sub module "fb"
[ 19.291] (II) LoadModule: "fb"
[ 19.291] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 19.305] (II) Module fb: vendor="X.Org Foundation"
[ 19.305] compiled for 1.10.2, module version = 1.0.0
[ 19.305] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.305] (II) Loading sub module "exa"
[ 19.305] (II) LoadModule: "exa"
[ 19.305] (II) Loading /usr/lib64/xorg/modules/libexa.so
[ 19.317] (II) Module exa: vendor="X.Org Foundation"
[ 19.317] compiled for 1.10.2, module version = 2.5.0
[ 19.317] ABI class: X.Org Video Driver, version 10.0
[ 19.317] (II) Loading sub module "shadowfb"
[ 19.317] (II) LoadModule: "shadowfb"
[ 19.317] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[ 19.318] (II) Module shadowfb: vendor="X.Org Foundation"
[ 19.318] compiled for 1.10.2, module version = 1.0.0
[ 19.318] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.318] (--) Depth 24 pixmap format is 32 bpp
[ 19.337] (II) NOUVEAU(0): Opened GPU channel 2
[ 19.337] (II) NOUVEAU(0): [DRI2] Setup complete
[ 19.337] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 19.337] (II) NOUVEAU(0): GART: 512MiB available
[ 19.339] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[ 19.357] (II) EXA(0): Driver allocated offscreen pixmaps
[ 19.357] (II) EXA(0): Driver registered support for the following operations:
[ 19.357] (II) Solid
[ 19.357] (II) Copy
[ 19.357] (II) Composite (RENDER acceleration)
[ 19.357] (II) UploadToScreen
[ 19.357] (II) DownloadFromScreen
[ 19.357] (==) NOUVEAU(0): Backing store disabled
[ 19.357] (==) NOUVEAU(0): Silken mouse enabled
[ 19.358] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 19.358] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 19.358] (==) NOUVEAU(0): DPMS enabled
[ 19.358] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 19.358] (--) RandR disabled
[ 19.358] (II) Initializing built-in extension Generic Event Extension
[ 19.358] (II) Initializing built-in extension SHAPE
[ 19.358] (II) Initializing built-in extension MIT-SHM
[ 19.358] (II) Initializing built-in extension XInputExtension
[ 19.358] (II) Initializing built-in extension XTEST
[ 19.358] (II) Initializing built-in extension BIG-REQUESTS
[ 19.358] (II) Initializing built-in extension SYNC
[ 19.358] (II) Initializing built-in extension XKEYBOARD
[ 19.358] (II) Initializing built-in extension XC-MISC
[ 19.358] (II) Initializing built-in extension XINERAMA
[ 19.358] (II) Initializing built-in extension XFIXES
[ 19.358] (II) Initializing built-in extension RENDER
[ 19.358] (II) Initializing built-in extension RANDR
[ 19.358] (II) Initializing built-in extension COMPOSITE
[ 19.358] (II) Initializing built-in extension DAMAGE
[ 19.910] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 19.910] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 19.910] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 19.910] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 19.910] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 19.910] (II) AIGLX: Loaded and initialized /usr/lib64/dri/nouveau_dri.so
[ 19.910] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 20.103] (II) NOUVEAU(0): NVEnterVT is called.
[ 20.149] (II) NOUVEAU(0): Setting screen physical size to 338 x 190
[ 20.150] resize called 1280 720
[ 20.608] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 20.608] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 20.608] (**) Power Button: Applying InputClass "Logitech Media Keyboard"
[ 20.608] (**) Power Button: Applying InputClass "keyboard-all"
[ 20.608] (II) LoadModule: "evdev"
[ 20.608] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.614] (II) Module evdev: vendor="X.Org Foundation"
[ 20.614] compiled for 1.10.2, module version = 2.6.0
[ 20.614] Module class: X.Org XInput Driver
[ 20.614] ABI class: X.Org XInput driver, version 12.2
[ 20.614] (II) Using input driver 'evdev' for 'Power Button'
[ 20.615] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.615] (**) Power Button: always reports core events
[ 20.615] (**) Power Button: Device: "/dev/input/event1"
[ 20.622] (--) Power Button: Found keys
[ 20.622] (II) Power Button: Configuring as keyboard
[ 20.622] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 20.622] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 20.622] (**) Option "xkb_rules" "evdev"
[ 20.622] (**) Option "xkb_model" "evdev"
[ 20.622] (**) Option "xkb_layout" "fr"
[ 20.622] (**) Option "xkb_variant" "latin9"
[ 20.622] (**) Option "xkb_options" "compose:menu"
[ 20.675] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 20.675] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 20.675] (**) Power Button: Applying InputClass "Logitech Media Keyboard"
[ 20.675] (**) Power Button: Applying InputClass "keyboard-all"
[ 20.675] (II) Using input driver 'evdev' for 'Power Button'
[ 20.675] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.675] (**) Power Button: always reports core events
[ 20.675] (**) Power Button: Device: "/dev/input/event0"
[ 20.686] (--) Power Button: Found keys
[ 20.686] (II) Power Button: Configuring as keyboard
[ 20.686] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 20.686] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 20.686] (**) Option "xkb_rules" "evdev"
[ 20.686] (**) Option "xkb_model" "evdev"
[ 20.686] (**) Option "xkb_layout" "fr"
[ 20.686] (**) Option "xkb_variant" "latin9"
[ 20.686] (**) Option "xkb_options" "compose:menu"
[ 20.690] (II) config/udev: Adding input device HID 0a5c:4502 (/dev/input/event3)
[ 20.690] (**) HID 0a5c:4502: Applying InputClass "evdev keyboard catchall"
[ 20.690] (**) HID 0a5c:4502: Applying InputClass "Logitech Media Keyboard"
[ 20.690] (**) HID 0a5c:4502: Applying InputClass "keyboard-all"
[ 20.690] (II) Using input driver 'evdev' for 'HID 0a5c:4502'
[ 20.690] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.690] (**) HID 0a5c:4502: always reports core events
[ 20.690] (**) HID 0a5c:4502: Device: "/dev/input/event3"
[ 20.698] (--) HID 0a5c:4502: Found keys
[ 20.698] (II) HID 0a5c:4502: Configuring as keyboard
[ 20.698] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.1/5-1.1:1.0/input/input3/event3"
[ 20.698] (II) XINPUT: Adding extended input device "HID 0a5c:4502" (type: KEYBOARD)
[ 20.698] (**) Option "xkb_rules" "evdev"
[ 20.698] (**) Option "xkb_model" "evdev"
[ 20.698] (**) Option "xkb_layout" "fr"
[ 20.698] (**) Option "xkb_variant" "latin9"
[ 20.698] (**) Option "xkb_options" "compose:menu"
[ 20.699] (II) config/udev: Adding input device HID 0a5c:4503 (/dev/input/event4)
[ 20.699] (**) HID 0a5c:4503: Applying InputClass "evdev pointer catchall"
[ 20.699] (II) Using input driver 'evdev' for 'HID 0a5c:4503'
[ 20.699] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.699] (**) HID 0a5c:4503: always reports core events
[ 20.699] (**) HID 0a5c:4503: Device: "/dev/input/event4"
[ 20.706] (--) HID 0a5c:4503: Found 3 mouse buttons
[ 20.706] (--) HID 0a5c:4503: Found relative axes
[ 20.706] (--) HID 0a5c:4503: Found x and y relative axes
[ 20.706] (II) HID 0a5c:4503: Configuring as mouse
[ 20.706] (**) HID 0a5c:4503: YAxisMapping: buttons 4 and 5
[ 20.706] (**) HID 0a5c:4503: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 20.706] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.2/5-1.2:1.0/input/input4/event4"
[ 20.706] (II) XINPUT: Adding extended input device "HID 0a5c:4503" (type: MOUSE)
[ 20.706] (II) HID 0a5c:4503: initialized for relative axes.
[ 20.706] (**) HID 0a5c:4503: (accel) keeping acceleration scheme 1
[ 20.706] (**) HID 0a5c:4503: (accel) acceleration profile 0
[ 20.706] (**) HID 0a5c:4503: (accel) acceleration factor: 2.000
[ 20.706] (**) HID 0a5c:4503: (accel) acceleration threshold: 4
[ 20.706] (II) config/udev: Adding input device HID 0a5c:4503 (/dev/input/mouse0)
[ 20.706] (II) No input driver/identifier specified (ignoring)
[ 20.712] (II) config/udev: Adding input device G15 Gaming Keyboard (/dev/input/event5)
[ 20.712] (**) G15 Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
[ 20.712] (**) G15 Gaming Keyboard: Applying InputClass "Logitech Media Keyboard"
[ 20.712] (**) G15 Gaming Keyboard: Applying InputClass "keyboard-all"
[ 20.712] (II) Using input driver 'evdev' for 'G15 Gaming Keyboard'
[ 20.712] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.712] (**) G15 Gaming Keyboard: always reports core events
[ 20.712] (**) G15 Gaming Keyboard: Device: "/dev/input/event5"
[ 20.718] (--) G15 Gaming Keyboard: Found keys
[ 20.718] (II) G15 Gaming Keyboard: Configuring as keyboard
[ 20.718] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.0/input/input5/event5"
[ 20.718] (II) XINPUT: Adding extended input device "G15 Gaming Keyboard" (type: KEYBOARD)
[ 20.718] (**) Option "xkb_rules" "evdev"
[ 20.718] (**) Option "xkb_model" "evdev"
[ 20.718] (**) Option "xkb_layout" "fr"
[ 20.718] (**) Option "xkb_variant" "latin9"
[ 20.718] (**) Option "xkb_options" "compose:menu"
[ 20.719] (II) config/udev: Adding input device G15 Gaming Keyboard (/dev/input/event6)
[ 20.719] (**) G15 Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
[ 20.719] (**) G15 Gaming Keyboard: Applying InputClass "Logitech Media Keyboard"
[ 20.719] (**) G15 Gaming Keyboard: Applying InputClass "keyboard-all"
[ 20.719] (II) Using input driver 'evdev' for 'G15 Gaming Keyboard'
[ 20.719] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.719] (**) G15 Gaming Keyboard: always reports core events
[ 20.719] (**) G15 Gaming Keyboard: Device: "/dev/input/event6"
[ 20.726] (--) G15 Gaming Keyboard: Found keys
[ 20.726] (II) G15 Gaming Keyboard: Configuring as keyboard
[ 20.726] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.1/input/input6/event6"
[ 20.726] (II) XINPUT: Adding extended input device "G15 Gaming Keyboard" (type: KEYBOARD)
[ 20.726] (**) Option "xkb_rules" "evdev"
[ 20.726] (**) Option "xkb_model" "evdev"
[ 20.726] (**) Option "xkb_layout" "fr"
[ 20.726] (**) Option "xkb_variant" "latin9"
[ 20.726] (**) Option "xkb_options" "compose:menu"
[ 20.727] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/event7)
[ 20.727] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
[ 20.727] (II) Using input driver 'evdev' for 'Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)'
[ 20.727] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.727] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): always reports core events
[ 20.727] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Device: "/dev/input/event7"
[ 20.738] (--) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found 9 mouse buttons
[ 20.738] (--) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
[ 20.738] (--) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found relative axes
[ 20.738] (--) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found x and y relative axes
[ 20.738] (II) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Configuring as mouse
[ 20.738] (II) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Adding scrollwheel support
[ 20.738] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
[ 20.738] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 20.738] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.3/6-2.3:1.0/input/input7/event7"
[ 20.738] (II) XINPUT: Adding extended input device "Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)" (type: MOUSE)
[ 20.738] (II) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): initialized for relative axes.
[ 20.738] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
[ 20.738] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
[ 20.738] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[ 20.738] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[ 20.738] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/mouse1)
[ 20.738] (II) No input driver/identifier specified (ignoring)
[ 20.739] (II) config/udev: Adding input device Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) (/dev/input/event2)
[ 20.739] (**) Media Center Ed. eHome Infrared Remote Transceiver (0471:0815): Applying InputClass "evdev keyboard catchall"
[ 20.740] (**) Media Center Ed. eHome Infrared Remote Transceiver (0471:0815): Applying InputClass "Logitech Media Keyboard"
[ 20.740] (**) Media Center Ed. eHome Infrared Remote Transceiver (0471:0815): Applying InputClass "keyboard-all"
[ 20.740] (II) Using input driver 'evdev' for 'Media Center Ed. eHome Infrared Remote Transceiver (0471:0815)'
[ 20.740] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.740] (**) Media Center Ed. eHome Infrared Remote Transceiver (0471:0815): always reports core events
[ 20.740] (**) Media Center Ed. eHome Infrared Remote Transceiver (0471:0815): Device: "/dev/input/event2"
[ 20.746] (--) Media Center Ed. eHome Infrared Remote Transceiver (0471:0815): Found keys
[ 20.746] (II) Media Center Ed. eHome Infrared Remote Transceiver (0471:0815): Configuring as keyboard
[ 20.746] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/rc/rc0/input2/event2"
[ 20.746] (II) XINPUT: Adding extended input device "Media Center Ed. eHome Infrared Remote Transceiver (0471:0815)" (type: KEYBOARD)
[ 20.746] (**) Option "xkb_rules" "evdev"
[ 20.746] (**) Option "xkb_model" "evdev"
[ 20.746] (**) Option "xkb_layout" "fr"
[ 20.746] (**) Option "xkb_variant" "latin9"
[ 20.746] (**) Option "xkb_options" "compose:menu"
[ 20.756] (II) config/udev: Adding input device G15 Extra Keys (/dev/input/event8)
[ 20.756] (**) G15 Extra Keys: Applying InputClass "evdev keyboard catchall"
[ 20.756] (**) G15 Extra Keys: Applying InputClass "Logitech Media Keyboard"
[ 20.756] (**) G15 Extra Keys: Applying InputClass "keyboard-all"
[ 20.756] (II) Using input driver 'evdev' for 'G15 Extra Keys'
[ 20.756] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.756] (**) G15 Extra Keys: always reports core events
[ 20.756] (**) G15 Extra Keys: Device: "/dev/input/event8"
[ 20.762] (--) G15 Extra Keys: Found keys
[ 20.762] (II) G15 Extra Keys: Configuring as keyboard
[ 20.762] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event8"
[ 20.762] (II) XINPUT: Adding extended input device "G15 Extra Keys" (type: KEYBOARD)
[ 20.762] (**) Option "xkb_rules" "evdev"
[ 20.762] (**) Option "xkb_model" "evdev"
[ 20.762] (**) Option "xkb_layout" "fr"
[ 20.762] (**) Option "xkb_variant" "latin9"
[ 20.762] (**) Option "xkb_options" "compose:menu"
[ 34.963] (II) NOUVEAU(0): EDID vendor "BEK", prod id 12851
[ 34.963] (II) NOUVEAU(0): Using hsync ranges from config file
[ 34.963] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 34.963] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 34.963] (II) NOUVEAU(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 46.669] (II) NOUVEAU(0): EDID vendor "BEK", prod id 12851
[ 46.669] (II) NOUVEAU(0): Using hsync ranges from config file
[ 46.669] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 46.669] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 46.669] (II) NOUVEAU(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[-- Attachment #3: dmesg_log --]
[-- Type: text/plain, Size: 66018 bytes --]
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.39-gentoo-r1 (root@funky64) (gcc version 4.5.2 (Gentoo 4.5.2 p1.0, pie-0.4.5) ) #1 SMP PREEMPT Fri Jun 10 17:18:16 CEST 2011
Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-gentoo-r1 root=/dev/sda1 ro rootfstype=ext4 log_buf_len=1M
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f680000 (usable)
BIOS-e820: 000000007f680000 - 000000007f698000 (ACPI data)
BIOS-e820: 000000007f698000 - 000000007f6dc000 (ACPI NVS)
BIOS-e820: 000000007f6dc000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.5 present.
DMI: System manufacturer System Product Name/P6T, BIOS 1303 03/08/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7f680 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E3FFF write-protect
E4000-EBFFF write-through
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07F700000 mask FFFF00000 uncachable
2 base 07F800000 mask FFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000ff780] ff780
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000099000] 99000 size 20480
init_memory_mapping: 0000000000000000-000000007f680000
0000000000 - 007f600000 page 2M
007f600000 - 007f680000 page 4k
kernel direct mapping tables up to 7f680000 @ 7f67c000-7f680000
ACPI: RSDP 00000000000fad60 00024 (v02 ACPIAM)
ACPI: XSDT 000000007f680100 0005C (v01 030810 XSDT1026 20100308 MSFT 00000097)
ACPI: FACP 000000007f680290 000F4 (v03 030810 FACP1026 20100308 MSFT 00000097)
ACPI: DSDT 000000007f6804b0 0C466 (v01 A1146 A1146001 00000001 INTL 20060113)
ACPI: FACS 000000007f698000 00040
ACPI: APIC 000000007f680390 000D8 (v01 030810 APIC1026 20100308 MSFT 00000097)
ACPI: MCFG 000000007f680470 0003C (v01 030810 OEMMCFG 20100308 MSFT 00000097)
ACPI: OEMB 000000007f698040 00072 (v01 030810 OEMB1026 20100308 MSFT 00000097)
ACPI: HPET 000000007f68f4b0 00038 (v01 030810 OEMHPET 20100308 MSFT 00000097)
ACPI: OSFR 000000007f68f4f0 000B0 (v01 030810 OEMOSFR 20100308 MSFT 00000097)
ACPI: SSDT 000000007f69a330 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000007f680000
NUMA: Using 63 for the hash shift.
Initmem setup node 0 0000000000000000-000000007f680000
NODE_DATA [000000007f677000 - 000000007f67bfff]
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007ce00000-ffff88007e9fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x0007f680
On node 0 totalpages: 521742
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3921 pages, LIFO batch:0
DMA32 zone: 7079 pages used for memmap
DMA32 zone: 510681 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88007f400000 s73984 r8192 d24320 u131072
pcpu-alloc: s73984 r8192 d24320 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 514602
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-gentoo-r1 root=/dev/sda1 ro rootfstype=ext4 log_buf_len=1M
log_buf_len: 1048576
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2049216k/2087424k available (3300k kernel code, 456k absent, 37752k reserved, 1930k data, 576k init)
Preemptable hierarchical RCU implementation.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:1280
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration failed
TSC: PIT calibration matches HPET. 1 loops
Detected 2672.820 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.64 BogoMIPS (lpj=2672820)
pid_max: default: 32768 minimum: 301
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110316
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#3
smpboot cpu 3: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#4
smpboot cpu 4: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#5
smpboot cpu 5: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#6
smpboot cpu 6: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#7
smpboot cpu 7: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 8 CPUs
Total of 8 processors activated (42972.15 BogoMIPS).
PM: Registering ACPI NVS region at 7f698000 (278528 bytes)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 000000007f6980c0 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: SSDT 000000007f699cd0 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x7ff00000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:3405] type 0 class 0x000600
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
pci 0000:00:14.3: [8086:3438] type 0 class 0x000800
pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io 0xb800-0xb81f]
pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f]
pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
pci 0000:00:1a.2: reg 20: [io 0xbc00-0xbc1f]
pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xf7fff000-0xf7fff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: [8086:3a44] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0xb080-0xb09f]
pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f]
pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0xb480-0xb49f]
pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xf7ffe000-0xf7ffe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0xac00-0xac07]
pci 0000:00:1f.2: reg 14: [io 0xa880-0xa883]
pci 0000:00:1f.2: reg 18: [io 0xa800-0xa807]
pci 0000:00:1f.2: reg 1c: [io 0xa480-0xa483]
pci 0000:00:1f.2: reg 20: [io 0xa400-0xa41f]
pci 0000:00:1f.2: reg 24: [mem 0xf7ffc000-0xf7ffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xf7ffd000-0xf7ffd0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: [10de:0641] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0xcc00-0xcc7f]
pci 0000:02:00.0: reg 30: [mem 0xfbc80000-0xfbcfffff pref]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbcfffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.0: PCI bridge to [bus 06-06]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:05:00.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:05:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit]
pci 0000:05:00.0: reg 20: [mem 0xf6ef0000-0xf6efffff 64bit pref]
pci 0000:05:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 05-05]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.2: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref]
pci 0000:04:00.0: [197b:2363] type 0 class 0x000101
pci 0000:04:00.0: reg 24: [mem 0xfbdfe000-0xfbdfffff]
pci 0000:04:00.0: reg 30: [mem 0xfbde0000-0xfbdeffff pref]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: [197b:2363] type 0 class 0x000101
pci 0000:04:00.1: reg 10: [io 0xdc00-0xdc07]
pci 0000:04:00.1: reg 14: [io 0xd880-0xd883]
pci 0000:04:00.1: reg 18: [io 0xd800-0xd807]
pci 0000:04:00.1: reg 1c: [io 0xd480-0xd483]
pci 0000:04:00.1: reg 20: [io 0xd400-0xd40f]
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x7ff00000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
reserve RAM buffer: 000000000009ec00 - 000000000009ffff
reserve RAM buffer: 000000007f680000 - 000000007fffffff
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #5
Switched to NOHz mode on CPU #3
Switched to NOHz mode on CPU #4
Switched to NOHz mode on CPU #6
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #7
Switched to NOHz mode on CPU #1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x7ff00000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfbf00000-0xfbffffff]
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfebfffff]
pnp 00:01: [mem 0xfec8a000-0xfec8afff]
pnp 00:01: [mem 0xfed10000-0xfed10fff]
system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io 0x0290-0x029f]
system 00:06: [io 0x0290-0x029f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x004d]
pnp 00:07: [io 0x0050-0x005f]
pnp 00:07: [io 0x0062-0x0063]
pnp 00:07: [io 0x0065-0x006f]
pnp 00:07: [io 0x0072-0x007f]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0084-0x0086]
pnp 00:07: [io 0x0088]
pnp 00:07: [io 0x008c-0x008e]
pnp 00:07: [io 0x0090-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
pnp 00:07: [io 0x0800-0x087f]
pnp 00:07: [io 0x0400-0x03ff disabled]
pnp 00:07: [io 0x0500-0x057f]
pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
pnp 00:07: [mem 0xfed20000-0xfed3ffff]
pnp 00:07: [mem 0xfed40000-0xfed8ffff]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [mem 0xfed00000-0xfed003ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:09: [mem 0xffa00000-0xffbfffff]
pnp 00:09: [mem 0xffe00000-0xffffffff]
pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:0a: [mem 0xffc00000-0xffdfffff]
system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io 0x0060]
pnp 00:0b: [io 0x0064]
pnp 00:0b: [mem 0xfec00000-0xfec00fff]
pnp 00:0b: [mem 0xfee00000-0xfee00fff]
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0xe0000000-0xefffffff]
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x00000000-0x0009ffff]
pnp 00:0d: [mem 0x000c0000-0x000cffff]
pnp 00:0d: [mem 0x000e0000-0x000fffff]
pnp 00:0d: [mem 0x00100000-0x7fefffff]
pnp 00:0d: [mem 0xfed90000-0xffffffff]
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0x7fefffff] could not be reserved
system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.4: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.0: BAR 8: assigned [mem 0x80200000-0x805fffff]
pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbcfffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem disabled]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 06-06]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x80200000-0x805fffff]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 05-05]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.2: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4: bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 07-07]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbcfffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0x80200000-0x805fffff]
pci_bus 0000:06: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:05: resource 2 [mem 0xf6e00000-0xf6efffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:04: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0x7ff00000-0xdfffffff]
pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 256 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1307729773.687:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4002
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 65 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 66 for MSI/MSI-X
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ahci 0000:00:1f.2: irq 67 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc100 irq 67
ata2: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc180 irq 67
ata3: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc200 irq 67
ata4: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc280 irq 67
ata5: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc300 irq 67
ata6: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc380 irq 67
ahci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:04:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 16
ata8: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 16
pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pata_jmicron 0000:04:00.1: setting latency timer to 64
scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
registered taskstats version 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ata9.00: HPA detected: current 398294975, native 398297088
ata9.00: ATA-7: Maxtor 6B200P0, BAH41BM0, max UDMA/133
ata9.00: 398294975 sectors, multi 0: LBA48
ata9.00: configured for UDMA/100
ata1: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
Refined TSC clocksource calibration: 2672.727 MHz.
Switching to clocksource tsc
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: HPA detected: current 321670847, native 321672960
ata5.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133
ata5.00: 321670847 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 321670847 512-byte logical blocks: (164 GB/153 GiB)
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 4:0:0:0: [sda] Attached SCSI disk
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata6.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 8:0:0:0: Direct-Access ATA Maxtor 6B200P0 BAH4 PQ: 0 ANSI: 5
sd 8:0:0:0: [sdc] 398294975 512-byte logical blocks: (203 GB/189 GiB)
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 8:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1 sdb2 sdb3
sd 5:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 576k freed
udevd[1833]: starting version 171
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:05:00.0: setting latency timer to 64
r8169 0000:05:00.0: irq 68 for MSI/MSI-X
r8169 0000:05:00.0: eth0: RTL8168c/8111c at 0xffffc90010a60000, e0:cb:4e:81:62:dd, XID 1c4000c0 IRQ 68
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
[drm] Initialized drm 1.1.0 20060810
usb 5-1: new full speed USB device number 2 using uhci_hcd
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 69 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 3 ports detected
nouveau 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
nouveau 0000:02:00.0: setting latency timer to 64
[drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x096080c1)
[drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
hda_codec: ALC1200: BIOS auto-probing.
usb 6-2: new full speed USB device number 2 using uhci_hcd
[drm] nouveau 0000:02:00.0: ... appears to be valid
[drm] nouveau 0000:02:00.0: BIT BIOS found
[drm] nouveau 0000:02:00.0: Bios version 62.94.4b.00
[drm] nouveau 0000:02:00.0: TMDS table version 2.0
[drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000302 00020030
[drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02021342 00020030
[drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[drm] nouveau 0000:02:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[drm] nouveau 0000:02:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:02:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[drm] nouveau 0000:02:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD20A
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD657
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE6A7
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xE7F0
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xEA5C
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xEAC1
[drm] nouveau 0000:02:00.0: 0xEAC1: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:02:00.0: 1 available performance level(s)
[drm] nouveau 0000:02:00.0: 3: memory 333MHz core 550MHz shader 1375MHz fanspeed 100%
[drm] nouveau 0000:02:00.0: c: memory 399MHz core 400MHz shader 800MHz
[TTM] Zone kernel: Available graphics memory: 1024896 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:02:00.0: Detected 512MiB VRAM
[drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
usb 7-1: new full speed USB device number 2 using uhci_hcd
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
usb 5-1.1: new full speed USB device number 3 using uhci_hcd
lirc_dev: IR Remote Control driver registered, major 251
IR LIRC bridge handler initialized
IR keymap rc-rc6-mce not found
Registered IR keymap rc-empty
input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/rc/rc0/input2
rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/rc/rc0
rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
mceusb 7-1:1.0: Registered Philips eHome Infrared Transceiver on usb7:2
usbcore: registered new interface driver mceusb
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.1/5-1.1:1.0/input/input3
generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1a.2-1.1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 5-1.2: new full speed USB device number 4 using uhci_hcd
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.2/5-1.2:1.0/input/input4
generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1a.2-1.2/input0
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm] nouveau 0000:02:00.0: allocated 1680x1050 fb: 0x40000000, bo ffff880078fc6800
fbcon: nouveaufb (fb0) is primary device
usb 5-1.3: new full speed USB device number 5 using uhci_hcd
Console: switching to colour frame buffer device 160x45
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usb 6-2.1: new low speed USB device number 3 using uhci_hcd
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
usb 5-1.1: input irq status -75 received
usb 5-1.1: input irq status -75 received
usb 5-1.1: input irq status -75 received
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.0/input/input5
generic-usb 0003:046D:C226.0003: input,hidraw2: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:1d.0-2.1/input0
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.1/input/input6
generic-usb 0003:046D:C226.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:1d.0-2.1/input1
usb 6-2.3: new low speed USB device number 4 using uhci_hcd
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.3/6-2.3:1.0/input/input7
generic-usb 0003:045E:0039.0005: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-2.3/input0
usb 6-2.4: new full speed USB device number 5 using uhci_hcd
input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.4/6-2.4:1.0/input/input8
generic-usb 0003:046D:C227.0006: input,hiddev0,hidraw5: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:1d.0-2.4/input0
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdc1): using internal journal
EXT3-fs (sdc1): mounted filesystem with writeback data mode
input: G15 Extra Keys as /devices/virtual/input/input9
Adding 971928k swap on /dev/sda2. Priority:-1 extents:1 across:971928k
r8169 0000:05:00.0: eth0: link down
r8169 0000:05:00.0: eth0: link down
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Registering the id_resolver key type
r8169 0000:05:00.0: eth0: link up
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
coretemp coretemp.0: TjMax is 97 C.
coretemp coretemp.1: TjMax is 97 C.
coretemp coretemp.2: TjMax is 97 C.
coretemp coretemp.3: TjMax is 97 C.
w83627ehf: Found W83667HG chip at 0x290
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[-- Attachment #4: lspci_log --]
[-- Type: text/plain, Size: 44695 bytes --]
00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13)
Subsystem: ASUSTeK Computer Inc. Device 836b
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit-
Address: 00000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 836b
Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit-
Address: 00000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 25.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
Kernel driver in use: pcieport
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f8000000-fbcfffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 836b
Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit-
Address: 00000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #2, PowerLimit 75.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
Kernel driver in use: pcieport
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 836b
Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit-
Address: 00000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #5, PowerLimit 25.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
Kernel driver in use: pcieport
00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at b800 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at b880 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at bc00 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7fff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
Subsystem: ASUSTeK Computer Inc. Device 8357
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 69
Region 0: Memory at f7ff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00000 Data: 40a1
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80200000-805fffff
Prefetchable memory behind bridge: 00000000f6f00000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #0, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00000 Data: 4049
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8357
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000f6e00000-00000000f6efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #0, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00000 Data: 4051
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8357
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=03 ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbd00000-fbdfffff
Prefetchable memory behind bridge: 0000000080000000-00000000801fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #0, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00000 Data: 4059
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8357
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=05 ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at b080 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b400 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b480 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7ffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device 82d4
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 67
Region 0: I/O ports at ac00 [size=8]
Region 1: I/O ports at a880 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a480 [size=4]
Region 4: I/O ports at a400 [size=32]
Region 5: Memory at f7ffc000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
Address: fee00000 Data: 4069
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7ffd000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
02:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9400 GT] (rev a1) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at cc00 [size=128]
Expansion ROM at fbc80000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [128 v1] Power Budgeting <?>
Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel driver in use: nouveau
Kernel modules: nouveau
04:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 824f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at fbdfe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at fbde0000 [disabled] [size=64K]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Express (v1) Legacy Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: ahci
04:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device 824f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_jmicron
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Subsystem: ASUSTeK Computer Inc. Device 82c6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 68
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at fbeff000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f6ef0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fbec0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00000 Data: 4079
Capabilities: [70] Express (v1) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
Unknown small resource type 05, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 03-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
Kernel modules: r8169
[-- Attachment #5: xrandr_log --]
[-- Type: text/plain, Size: 9308 bytes --]
Screen 0: minimum 320 x 200, current 2960 x 1050, maximum 8192 x 8192
DVI-I-1 connected 1680x1050+0+0 (0x63) normal (normal left inverted right x axis y axis) 473mm x 296mm
Identifier: 0x61
Timestamp: 301673
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff00047274ad70096064
2e100103e82f1e782ec585a459499a24
125054bfef0081808140714f9500950f
b30081c08bc021399030621a274068b0
3600d9281100001c000000fd00384c1e
5210000a202020202020000000fc0041
63657220414c32323136570a000000ff
004c373430393034363338323020002f
dithering: Off
supported: Off On Automatic
scaling mode: Full
supported: None Full Center Full aspect
select subconnector: Automatic
supported: Automatic DVI-D DVI-A
subconnector: DVI-D
supported: Unknown DVI-D DVI-A
1680x1050 (0x63) 146.2MHz -HSync +VSync *current +preferred
h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.3KHz
v: height 1050 start 1053 end 1059 total 1089 clock 60.0Hz
1280x1024 (0x64) 135.0MHz +HSync +VSync
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 80.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.0Hz
1280x1024 (0x65) 108.0MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1440x900 (0x66) 136.8MHz -HSync +VSync
h: width 1440 start 1536 end 1688 total 1936 skew 0 clock 70.6KHz
v: height 900 start 903 end 909 total 942 clock 75.0Hz
1440x900 (0x67) 106.5MHz -HSync +VSync
h: width 1440 start 1520 end 1672 total 1904 skew 0 clock 55.9KHz
v: height 900 start 903 end 909 total 934 clock 59.9Hz
1280x960 (0x68) 108.0MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.0KHz
v: height 960 start 961 end 964 total 1000 clock 60.0Hz
1360x768 (0x69) 84.8MHz -HSync +VSync
h: width 1366 start 1431 end 1567 total 1776 skew 0 clock 47.7KHz
v: height 768 start 771 end 781 total 798 clock 59.8Hz
1152x864 (0x6a) 108.0MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz
v: height 864 start 865 end 868 total 900 clock 75.0Hz
1280x720 (0x6b) 74.4MHz -HSync +VSync
h: width 1280 start 1336 end 1472 total 1664 skew 0 clock 44.7KHz
v: height 720 start 721 end 724 total 746 clock 60.0Hz
1024x768 (0x6c) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0x6d) 75.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz
v: height 768 start 771 end 777 total 806 clock 70.1Hz
1024x768 (0x6e) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
832x624 (0x6f) 57.3MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz
v: height 624 start 625 end 628 total 667 clock 74.6Hz
800x600 (0x70) 50.0MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz
v: height 600 start 637 end 643 total 666 clock 72.2Hz
800x600 (0x71) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x72) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x73) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0x74) 31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz
v: height 480 start 489 end 491 total 520 clock 72.8Hz
640x480 (0x75) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x76) 30.2MHz -HSync -VSync
h: width 640 start 704 end 768 total 864 skew 0 clock 35.0KHz
v: height 480 start 483 end 486 total 525 clock 66.7Hz
640x480 (0x77) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
720x400 (0x78) 28.3MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz
DVI-I-2 connected 1280x720+1680+0 (0x79) normal (normal left inverted right x axis y axis) 708mm x 398mm
Identifier: 0x62
Timestamp: 301673
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 1
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff0008ab333261b90b03
310f01030e4628782a3f44a654469924
13484bbfee0001010101010101010101
010101010101011d00bc52d01e20b828
5540c48e2100001e000000fd00384c1f
3d08000a202020202020000000ff0035
32353030303030300a202020000000fc
0042454b4f2d564a415a310a2020006d
dithering: Off
supported: Off On Automatic
scaling mode: Full
supported: None Full Center Full aspect
select subconnector: Automatic
supported: Automatic DVI-D DVI-A
subconnector: DVI-A
supported: Unknown DVI-D DVI-A
1280x720 (0x79) 74.2MHz +HSync +VSync *current +preferred
h: width 1280 start 1720 end 1760 total 1980 skew 0 clock 37.5KHz
v: height 720 start 725 end 730 total 750 clock 50.0Hz
1024x768 (0x6c) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0x6d) 75.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz
v: height 768 start 771 end 777 total 806 clock 70.1Hz
1024x768 (0x6e) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
832x624 (0x6f) 57.3MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz
v: height 624 start 625 end 628 total 667 clock 74.6Hz
800x600 (0x70) 50.0MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz
v: height 600 start 637 end 643 total 666 clock 72.2Hz
800x600 (0x71) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x72) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x73) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0x74) 31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz
v: height 480 start 489 end 491 total 520 clock 72.8Hz
640x480 (0x75) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x76) 30.2MHz -HSync -VSync
h: width 640 start 704 end 768 total 864 skew 0 clock 35.0KHz
v: height 480 start 483 end 486 total 525 clock 66.7Hz
640x480 (0x77) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
720x400 (0x78) 28.3MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz
[-- Attachment #6: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2011-06-14 10:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-14 10:58 zaverel [this message]
2011-06-14 11:09 ` nouveau Ignoring invalid EDID block 1 xrandr can't change resolution on monitor two (dualdisplay) zaverel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DF73EB8.6000206@free.fr \
--to=zaverel@free.fr \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.