From: zaverel <zaverel-GANU6spQydw@public.gmane.org>
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: Re: nouveau Ignoring invalid EDID block 1
Date: Wed, 15 Jun 2011 17:02:52 +0200 [thread overview]
Message-ID: <4DF8C99C.5050402@free.fr> (raw)
In-Reply-To: <op.vw4dswkx7cbmmg@emo>
[-- Attachment #1: Type: text/plain, Size: 1705 bytes --]
hello
Le 15/06/2011 15:44, Emil Velikov a écrit :
> So let see if I got this correct
>
> Desktop card with 2 monitors connected to it
>
> 1 - Default monitor connected via DVI
> 2 - Second monitor (TV actually), via VGA
>
Yes
> Even though xrandr reports display 2 to have resolution set to
> 1280x720 50hz, the display itself reports 1202x670 50hz
yes
>
> When you say linux-2.6.36-gentoo-r6, can you please state the
> commit (or tag) it is based on
I made a little mistake , it's linux-2.6.36-gentoo-r8 and it's the last
kernel 2.6.36 from gentoo
>
> Before you were able to set the resolution of the TV, but
> now you cannot - any messages? (either on TV or logs)
Yes, with linux-2.6.36-gentoo-r8 , i'm able to set the resolution of the TV,
but with any newer kernel , i can't.
>
> Was the TV being detected correctly before - same resolution via
> xrandr and tv info?
yes
> Was the connection of the TV incorrectly being detected before
> - VGA .. DVI?
no
>
> Whereas for the "ERROR Raw EDID..." message my guess is that the
> TV does not manage to provide the data fast enough or the connection
> (cable/connectors) are not in good working order
when i'll find another cable, i try.
>
> Can you provide is the same logs but for the working kernel
done
>
> Cheers
>
>
ps:
To be clear, i have to use a modeline to get 1280x720 in xorg.conf
Without it ,tv stay at 1024x768 60hz.
with the nvidia it was the same :
put a modeline and use this:
Option "ModeValidation" "AllowNon60HzDFPModes , NoEdidMaxPClkCheck ,
NoHorizSyncCheck , NoVertRefreshCheck , NoDFPNativeResolutionCheck ,
NoEdidModes "
See you
[-- Attachment #2: dmesg_log --]
[-- Type: text/plain, Size: 63278 bytes --]
Initializing cgroup subsys cpuset
Linux version 2.6.36-gentoo-r8 (root@funky64) (gcc version 4.5.2 (Gentoo 4.5.2 p1.0, pie-0.4.5) ) #1 SMP PREEMPT Wed Jun 15 16:28:57 CEST 2011
Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36-gentoo-r8 root=/dev/sda1 ro rootfstype=ext4 acpi_enforce_resources=lax video=DVI-I-1:1024x768@75 log_buf_len=1M
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f680000 (usable)
BIOS-e820: 000000007f680000 - 000000007f698000 (ACPI data)
BIOS-e820: 000000007f698000 - 000000007f6dc000 (ACPI NVS)
BIOS-e820: 000000007f6dc000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.5 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7f680 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E3FFF write-protect
E4000-EBFFF write-through
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07F700000 mask FFFF00000 uncachable
2 base 07F800000 mask FFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000ff780] ff780
init_memory_mapping: 0000000000000000-000000007f680000
0000000000 - 007f600000 page 2M
007f600000 - 007f680000 page 4k
kernel direct mapping tables up to 7f680000 @ 16000-1a000
ACPI: RSDP 00000000000fad60 00024 (v02 ACPIAM)
ACPI: XSDT 000000007f680100 0005C (v01 030810 XSDT1026 20100308 MSFT 00000097)
ACPI: FACP 000000007f680290 000F4 (v03 030810 FACP1026 20100308 MSFT 00000097)
ACPI: DSDT 000000007f6804b0 0C466 (v01 A1146 A1146001 00000001 INTL 20060113)
ACPI: FACS 000000007f698000 00040
ACPI: APIC 000000007f680390 000D8 (v01 030810 APIC1026 20100308 MSFT 00000097)
ACPI: MCFG 000000007f680470 0003C (v01 030810 OEMMCFG 20100308 MSFT 00000097)
ACPI: OEMB 000000007f698040 00072 (v01 030810 OEMB1026 20100308 MSFT 00000097)
ACPI: HPET 000000007f68f4b0 00038 (v01 030810 OEMHPET 20100308 MSFT 00000097)
ACPI: OSFR 000000007f68f4f0 000B0 (v01 030810 OEMOSFR 20100308 MSFT 00000097)
ACPI: SSDT 000000007f69a330 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000007f680000
Initmem setup node 0 0000000000000000-000000007f680000
NODE_DATA [00000000015ef2c0 - 00000000015f42bf]
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x0007f680
On node 0 totalpages: 521742
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3926 pages, LIFO batch:0
DMA32 zone: 7079 pages used for memmap
DMA32 zone: 510681 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 64
early_res array is doubled to 64 at [18000 - 187ff]
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff880001800000 s77248 r8192 d21056 u131072
early_res array is doubled to 128 at [18800 - 197ff]
pcpu-alloc: s77248 r8192 d21056 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 514607
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36-gentoo-r8 root=/dev/sda1 ro rootfstype=ext4 acpi_enforce_resources=lax video=DVI-I-1:1024x768@75 log_buf_len=1M
log_buf_len: 1048576
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (60 early reservations)
#1 [0001000000 - 00015eeb30] TEXT DATA BSS
#2 [00015ef000 - 00015ef288] BRK
#3 [00000ff790 - 0000100000] BIOS reserved
#4 [00000ff780 - 00000ff790] MP-table mpf
#5 [000009ec00 - 00000e49e0] BIOS reserved
#6 [00000e4b7c - 00000ff780] BIOS reserved
#7 [00000e49e0 - 00000e4b7c] MP-table mpc
#8 [0000010000 - 0000012000] TRAMPOLINE
#9 [0000012000 - 0000016000] ACPI WAKEUP
#10 [0000016000 - 0000018000] PGTABLE
#11 [00015ef2c0 - 00015f42c0] NODE_DATA
#12 [00015f42c0 - 00015f52c0] BOOTMEM
#13 [00015eeb40 - 00015eec40] BOOTMEM
#14 [0001df6000 - 0001df7000] BOOTMEM
#15 [0001df7000 - 0001df8000] BOOTMEM
#16 [0001e00000 - 0003a00000] MEMMAP 0
#17 [00015eec40 - 00015eedc0] BOOTMEM
#18 [00015f52c0 - 00016012c0] BOOTMEM
#19 [0001602000 - 0001603000] BOOTMEM
#20 [00015eedc0 - 00015eee01] BOOTMEM
#21 [00015eee40 - 00015eeec6] BOOTMEM
#22 [00016012c0 - 00016014f0] BOOTMEM
#23 [00015eef00 - 00015eef68] BOOTMEM
#24 [00015eef80 - 00015eefe8] BOOTMEM
#25 [0001601500 - 0001601568] BOOTMEM
#26 [0001601580 - 00016015e8] BOOTMEM
#27 [0001601600 - 0001601668] BOOTMEM
#28 [0001601680 - 00016016e8] BOOTMEM
#29 [0001601700 - 0001601768] BOOTMEM
#30 [0001601780 - 00016017e8] BOOTMEM
#31 [0001601800 - 0001601868] BOOTMEM
#32 [0001601880 - 00016018a0] BOOTMEM
#33 [00016018c0 - 0001601950] BOOTMEM
#34 [0001601980 - 0001601a10] BOOTMEM
#35 [0001800000 - 000181a000] BOOTMEM
#36 [0001820000 - 000183a000] BOOTMEM
#37 [0001840000 - 000185a000] BOOTMEM
#38 [0001860000 - 000187a000] BOOTMEM
#39 [0001880000 - 000189a000] BOOTMEM
#40 [00018a0000 - 00018ba000] BOOTMEM
#41 [00018c0000 - 00018da000] BOOTMEM
#42 [00018e0000 - 00018fa000] BOOTMEM
#43 [0001900000 - 000191a000] BOOTMEM
#44 [0001920000 - 000193a000] BOOTMEM
#45 [0001940000 - 000195a000] BOOTMEM
#46 [0001960000 - 000197a000] BOOTMEM
#47 [0001980000 - 000199a000] BOOTMEM
#48 [00019a0000 - 00019ba000] BOOTMEM
#49 [00019c0000 - 00019da000] BOOTMEM
#50 [00019e0000 - 00019fa000] BOOTMEM
#51 [0001601a40 - 0001601a48] BOOTMEM
#52 [0001601a80 - 0001601a88] BOOTMEM
#53 [0001601ac0 - 0001601b00] BOOTMEM
#54 [0001601b00 - 0001601b80] BOOTMEM
#55 [0001601b80 - 0001601c90] BOOTMEM
#56 [0001601cc0 - 0001601d08] BOOTMEM
#57 [0001601d40 - 0001601d88] BOOTMEM
#58 [0001603000 - 0001703000] BOOTMEM
#59 [0001703000 - 000170b000] BOOTMEM
Memory: 2049380k/2087424k available (3171k kernel code, 456k absent, 37588k reserved, 1895k data, 548k init)
Hierarchical RCU implementation.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:1280
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2672.278 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5344.55 BogoMIPS (lpj=2672278)
pid_max: default: 32768 minimum: 301
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20100702
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
NMI watchdog enabled, takes one hw-pmu counter.
#2
NMI watchdog enabled, takes one hw-pmu counter.
#3
NMI watchdog enabled, takes one hw-pmu counter.
#4
NMI watchdog enabled, takes one hw-pmu counter.
#5
NMI watchdog enabled, takes one hw-pmu counter.
#6
NMI watchdog enabled, takes one hw-pmu counter.
#7
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 8 CPUs
Total of 8 processors activated (43345.02 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 000000007f6980c0 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: SSDT 000000007f699cd0 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x7ff00000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0xb800-0xb81f]
pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f]
pci 0000:00:1a.2: reg 20: [io 0xbc00-0xbc1f]
pci 0000:00:1a.7: reg 10: [mem 0xf7fff000-0xf7fff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xb080-0xb09f]
pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f]
pci 0000:00:1d.2: reg 20: [io 0xb480-0xb49f]
pci 0000:00:1d.7: reg 10: [mem 0xf7ffe000-0xf7ffe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
pci 0000:00:1f.2: reg 10: [io 0xac00-0xac07]
pci 0000:00:1f.2: reg 14: [io 0xa880-0xa883]
pci 0000:00:1f.2: reg 18: [io 0xa800-0xa807]
pci 0000:00:1f.2: reg 1c: [io 0xa480-0xa483]
pci 0000:00:1f.2: reg 20: [io 0xa400-0xa41f]
pci 0000:00:1f.2: reg 24: [mem 0xf7ffc000-0xf7ffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xf7ffd000-0xf7ffd0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0xcc00-0xcc7f]
pci 0000:02:00.0: reg 30: [mem 0xfbc80000-0xfbcfffff pref]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbcfffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.0: PCI bridge to [bus 06-06]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:05:00.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:05:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit]
pci 0000:05:00.0: reg 20: [mem 0xf6ef0000-0xf6efffff 64bit pref]
pci 0000:05:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 05-05]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.2: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref]
pci 0000:04:00.0: reg 24: [mem 0xfbdfe000-0xfbdfffff]
pci 0000:04:00.0: reg 30: [mem 0xfbde0000-0xfbdeffff pref]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10: [io 0xdc00-0xdc07]
pci 0000:04:00.1: reg 14: [io 0xd880-0xd883]
pci 0000:04:00.1: reg 18: [io 0xd800-0xd807]
pci 0000:04:00.1: reg 1c: [io 0xd480-0xd483]
pci 0000:04:00.1: reg 20: [io 0xd400-0xd40f]
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x7ff00000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
reserve RAM buffer: 000000000009ec00 - 000000000009ffff
reserve RAM buffer: 000000007f680000 - 000000007fffffff
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:06: [io 0x0290-0x029f] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0500-0x057f] could not be reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0x7fefffff] could not be reserved
system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
pci 0000:00:1c.0: BAR 8: assigned [mem 0x7ff00000-0x802fffff]
pci 0000:00:1c.4: BAR 9: assigned [mem 0x80300000-0x804fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbcfffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem disabled]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 06-06]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x7ff00000-0x802fffff]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 05-05]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.2: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4: bridge window [mem 0x80300000-0x804fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 07-07]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbcfffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0x7ff00000-0x802fffff]
pci_bus 0000:06: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:05: resource 2 [mem 0xf6e00000-0xf6efffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:04: resource 2 [mem 0x80300000-0x804fffff 64bit pref]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0x7ff00000-0xdfffffff]
pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 256 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1308155493.664:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4002
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ahci 0000:00:1f.2: irq 64 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc100 irq 64
ata2: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc180 irq 64
ata3: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc200 irq 64
ata4: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc280 irq 64
ata5: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc300 irq 64
ata6: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc380 irq 64
ahci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:04:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 16
ata8: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 16
pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pata_jmicron 0000:04:00.1: setting latency timer to 64
scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
registered taskstats version 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ata9.00: HPA detected: current 398294975, native 398297088
ata9.00: ATA-7: Maxtor 6B200P0, BAH41BM0, max UDMA/133
ata9.00: 398294975 sectors, multi 0: LBA48
ata9.00: configured for UDMA/100
ata1: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: HPA detected: current 321670847, native 321672960
ata5.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133
ata5.00: 321670847 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 321670847 512-byte logical blocks: (164 GB/153 GiB)
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 4:0:0:0: [sda] Attached SCSI disk
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata6.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sdb] Write Protect is off
scsi 8:0:0:0: Direct-Access ATA Maxtor 6B200P0 BAH4 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:0:0: [sdc] 398294975 512-byte logical blocks: (203 GB/189 GiB)
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 8:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1 sdb2 sdb3
sd 5:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 548k freed
<30>udevd[1795]: starting version 171
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x0400-0x040f 64bit window disabled]
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:05:00.0: setting latency timer to 64
r8169 0000:05:00.0: irq 65 for MSI/MSI-X
r8169 0000:05:00.0: eth0: RTL8168c/8111c at 0xffffc9000037e000, e0:cb:4e:81:62:dd, XID 1c4000c0 IRQ 65
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
[drm] Initialized drm 1.1.0 20060810
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 66 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
usb 5-1: new full speed USB device using uhci_hcd and address 2
nouveau 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
nouveau 0000:02:00.0: setting latency timer to 64
[drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x096080c1)
[drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:02:00.0: ... appears to be valid
[drm] nouveau 0000:02:00.0: BIT BIOS found
[drm] nouveau 0000:02:00.0: Bios version 62.94.4b.00
[drm] nouveau 0000:02:00.0: TMDS table version 2.0
[drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000302 00020030
[drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02021342 00020030
[drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[drm] nouveau 0000:02:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[drm] nouveau 0000:02:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:02:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[drm] nouveau 0000:02:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD20A
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD657
hda_codec: ALC1200: BIOS auto-probing.
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE6A7
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xE7F0
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xEA5C
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xEAC1
hub 5-1:1.0: USB hub found
[drm] nouveau 0000:02:00.0: 0xEAC1: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:02:00.0: Detected 512MiB VRAM
hub 5-1:1.0: 3 ports detected
[TTM] Zone kernel: Available graphics memory: 1024964 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[drm] nouveau 0000:02:00.0: Allocating FIFO number 1
usb 6-2: new full speed USB device using uhci_hcd and address 2
[drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
usb 7-1: new full speed USB device using uhci_hcd and address 2
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
usb 5-1.1: new full speed USB device using uhci_hcd and address 3
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID block 1 invalid.
[drm] nouveau 0000:02:00.0: DDC responded, but no EDID for DVI-I-2
lirc_dev: IR Remote Control driver registered, major 251
IR LIRC bridge handler initialized
[drm] nouveau 0000:02:00.0: allocated 1024x768 fb: 0x40240000, bo ffff88007df8b800
fbcon: nouveaufb (fb0) is primary device
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
Console: switching to colour frame buffer device 128x48
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0
IR keymap rc-rc6-mce not found
Registered IR keymap rc-empty
input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/virtual/rc/rc0/input2
rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/virtual/rc/rc0
rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
mceusb 7-1:1.0: Registered Philips eHome Infrared Transceiver on usb7:2
usbcore: registered new interface driver mceusb
usbcore: registered new interface driver hiddev
input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.1/5-1.1:1.0/input/input3
generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1a.2-1.1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 5-1.2: new full speed USB device using uhci_hcd and address 4
input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.2/5-1.2:1.0/input/input4
generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1a.2-1.2/input0
usb 5-1.3: new full speed USB device using uhci_hcd and address 5
vboxdrv: Found 8 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa048c560
vboxdrv: fAsync=0 offMin=0x5bc offMax=0x346e4
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.0.8 (interface 0x00180000).
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
usb 6-2.1: new low speed USB device using uhci_hcd and address 3
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.0/input/input5
generic-usb 0003:046D:C226.0003: input,hidraw2: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:1d.0-2.1/input0
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.1/input/input6
generic-usb 0003:046D:C226.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:1d.0-2.1/input1
usb 6-2.3: new low speed USB device using uhci_hcd and address 4
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.3/6-2.3:1.0/input/input7
generic-usb 0003:045E:0039.0005: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-2.3/input0
usb 6-2.4: new full speed USB device using uhci_hcd and address 5
input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.4/6-2.4:1.0/input/input8
generic-usb 0003:046D:C227.0006: input,hiddev0,hidraw5: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:1d.0-2.4/input0
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdc1): using internal journal
EXT3-fs (sdc1): mounted filesystem with writeback data mode
input: G15 Extra Keys as /devices/virtual/input/input9
Adding 971928k swap on /dev/sda2. Priority:-1 extents:1 across:971928k
r8169 0000:05:00.0: eth0: link up
r8169 0000:05:00.0: eth0: link up
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
usb 5-1.1: input irq status -75 received
usb 5-1.1: input irq status -75 received
usb 5-1.1: input irq status -75 received
coretemp coretemp.0: TjMax is 97 C.
coretemp coretemp.1: TjMax is 97 C.
coretemp coretemp.2: TjMax is 97 C.
coretemp coretemp.3: TjMax is 97 C.
[drm] nouveau 0000:02:00.0: unknown parameter 15
[drm] nouveau 0000:02:00.0: unknown parameter 15
[drm] nouveau 0000:02:00.0: unknown parameter 16
w83627ehf: Found W83667HG chip at 0x290
ACPI: resource w83627ehf [io 0x0295-0x0296] conflicts with ACPI region HWRE [mem 0x00000290-0x00000299 pref window disabled]
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
ACPI: 'USB6' and 'USB5' have the same GPE, can't disable/enable one separately
ACPI: 'USB5' and 'USB6' have the same GPE, can't disable/enable one separately
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID block 1 invalid.
[drm] nouveau 0000:02:00.0: DDC responded, but no EDID for DVI-I-2
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID block 1 invalid.
[drm] nouveau 0000:02:00.0: DDC responded, but no EDID for DVI-I-2
[drm] nouveau 0000:02:00.0: Allocating FIFO number 2
[drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2
[drm] nouveau 0000:02:00.0: unknown parameter 15
[drm] nouveau 0000:02:00.0: Allocating FIFO number 3
[drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 3
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID block 1 invalid.
[drm] nouveau 0000:02:00.0: DDC responded, but no EDID for DVI-I-2
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID block 1 invalid.
[drm] nouveau 0000:02:00.0: DDC responded, but no EDID for DVI-I-2
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[drm] nouveau 0000:02:00.0: unknown parameter 15
[drm] nouveau 0000:02:00.0: Allocating FIFO number 4
[drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 4
[drm] nouveau 0000:02:00.0: nouveau_channel_free: freeing fifo 4
[drm] nouveau 0000:02:00.0: unknown parameter 15
[drm] nouveau 0000:02:00.0: Allocating FIFO number 4
[drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 4
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID block 1 invalid.
[drm] nouveau 0000:02:00.0: DDC responded, but no EDID for DVI-I-2
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID block 1 invalid.
[drm] nouveau 0000:02:00.0: DDC responded, but no EDID for DVI-I-2
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: EDID block 1 invalid.
[drm] nouveau 0000:02:00.0: DDC responded, but no EDID for DVI-I-2
[-- Attachment #3: xrandr_log --]
[-- Type: text/plain, Size: 7410 bytes --]
Screen 0: minimum 320 x 200, current 2960 x 1050, maximum 8192 x 8192
DVI-I-1 connected 1680x1050+0+0 (0x63) normal (normal left inverted right x axis y axis) 473mm x 296mm
Identifier: 0x61
Timestamp: 16530
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff00047274ad70096064
2e100103e82f1e782ec585a459499a24
125054bfef0081808140714f9500950f
b30081c08bc021399030621a274068b0
3600d9281100001c000000fd00384c1e
5210000a202020202020000000fc0041
63657220414c32323136570a000000ff
004c373430393034363338323020002f
dithering: Off
supported: Off On Automatic
scaling mode: Full
supported: None Full Center Full aspect
select subconnector: Automatic
supported: Automatic DVI-D DVI-A
subconnector: DVI-D
supported: Unknown DVI-D DVI-A
1680x1050 (0x63) 146.2MHz -HSync +VSync *current +preferred
h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.3KHz
v: height 1050 start 1053 end 1059 total 1089 clock 60.0Hz
1280x1024 (0x64) 135.0MHz +HSync +VSync
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 80.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.0Hz
1280x1024 (0x65) 108.0MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1440x900 (0x66) 136.8MHz -HSync +VSync
h: width 1440 start 1536 end 1688 total 1936 skew 0 clock 70.6KHz
v: height 900 start 903 end 909 total 942 clock 75.0Hz
1440x900 (0x67) 106.5MHz -HSync +VSync
h: width 1440 start 1520 end 1672 total 1904 skew 0 clock 55.9KHz
v: height 900 start 903 end 909 total 934 clock 59.9Hz
1280x960 (0x68) 108.0MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.0KHz
v: height 960 start 961 end 964 total 1000 clock 60.0Hz
1360x768 (0x69) 84.8MHz -HSync +VSync
h: width 1366 start 1431 end 1567 total 1776 skew 0 clock 47.7KHz
v: height 768 start 771 end 781 total 798 clock 59.8Hz
1152x864 (0x6a) 108.0MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz
v: height 864 start 865 end 868 total 900 clock 75.0Hz
1280x720 (0x6b) 74.4MHz -HSync +VSync
h: width 1280 start 1336 end 1472 total 1664 skew 0 clock 44.7KHz
v: height 720 start 721 end 724 total 746 clock 60.0Hz
1024x768 (0x6c) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0x6d) 75.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz
v: height 768 start 771 end 777 total 806 clock 70.1Hz
1024x768 (0x6e) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
832x624 (0x6f) 57.3MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz
v: height 624 start 625 end 628 total 667 clock 74.6Hz
800x600 (0x70) 50.0MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz
v: height 600 start 637 end 643 total 666 clock 72.2Hz
800x600 (0x71) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x72) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x73) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0x74) 31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz
v: height 480 start 489 end 491 total 520 clock 72.8Hz
640x480 (0x75) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x76) 30.2MHz -HSync -VSync
h: width 640 start 704 end 768 total 864 skew 0 clock 35.0KHz
v: height 480 start 483 end 486 total 525 clock 66.7Hz
640x480 (0x77) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
720x400 (0x78) 28.3MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz
DVI-I-2 connected 1280x720+1680+0 (0x79) normal (normal left inverted right x axis y axis) 0mm x 0mm
Identifier: 0x62
Timestamp: 16530
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 1
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
dithering: Off
supported: Off On Automatic
scaling mode: Full
supported: None Full Center Full aspect
select subconnector: Automatic
supported: Automatic DVI-D DVI-A
subconnector: DVI-A
supported: Unknown DVI-D DVI-A
1280x720 (0x79) 95.8MHz -HSync +VSync *current +preferred
h: width 1280 start 1360 end 1488 total 1696 skew 0 clock 56.5KHz
v: height 720 start 723 end 728 total 755 clock 74.8Hz
1024x768 (0x6e) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
800x600 (0x72) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x73) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
848x480 (0x7a) 33.8MHz +HSync +VSync
h: width 848 start 864 end 976 total 1088 skew 0 clock 31.0KHz
v: height 480 start 486 end 494 total 517 clock 60.0Hz
640x480 (0x7b) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 489 end 492 total 525 clock 59.9Hz
[-- Attachment #4: xorg.conf --]
[-- Type: text/plain, Size: 1529 bytes --]
# external DVI with DisplaySize and preferred mode overriden
Section "Monitor"
Identifier "DVI-I-2"
Option "RightOf" "DVI-I-1"
# HorizSync 31.0 - 82.0
# VertRefresh 56.0 - 76.0
##DisplaySize 374 296 ##304 228
# 1360x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 84.72 MHz
## Modeline "1360x768" 84.72 1360 1424 1568 1776 768 769 772 795 -HSync +Vsync
# 1280x720 @ 75.00 Hz (GTF) hsync: 56.40 kHz; pclk: 95.65 MHz
# Modeline "1280x720" 95.65 1280 1352 1488 1696 720 721 724 752 -HSync +Vsync
# 1280x720 74.78 Hz (CVT 0.92M9) hsync: 56.46 kHz; pclk: 95.75 MHz
Modeline "1280x720" 95.75 1280 1360 1488 1696 720 723 728 755 -hsync +vsync
### Option "PreferredMode" "1360x768"
Option "PreferredMode" "1280x720"
EndSection
Section "Monitor"
Identifier "DVI-I-1"
#DisplaySize 374 296 #304 228
# 1680x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 147.14 MHz
# Modeline "1680x1050" 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -HSync +Vsync
Option "PreferredMode" "1680x1050"
EndSection
Section "Device"
Identifier "gforce7"
Driver "nouveau"
# BusID "PCI:5:0:0"
Option "GLXVBlank" "on"
Option "ModeDebug" "On"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "gforce7"
DefaultDepth 24
SubSection "Display"
Depth 24
# big virtual screen to place
Modes "1680x1050" "1280x720" ##"1360x768"
EndSubSection
EndSection
[-- Attachment #5: Type: text/plain, Size: 181 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
next prev parent reply other threads:[~2011-06-15 15:02 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-15 10:24 nouveau Ignoring invalid EDID block 1 zaverel
[not found] ` <4DF88862.9030609-GANU6spQydw@public.gmane.org>
2011-06-15 13:44 ` Emil Velikov
2011-06-15 15:02 ` zaverel [this message]
2011-06-15 15:32 ` zaverel
[not found] ` <4DF8D09C.5070704-GANU6spQydw@public.gmane.org>
2011-06-15 16:23 ` Emil Velikov
2011-06-15 17:08 ` zaverel
[not found] ` <4DF8E70F.1050304-GANU6spQydw@public.gmane.org>
2011-06-16 10:54 ` zaverel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DF8C99C.5050402@free.fr \
--to=zaverel-ganu6spqydw@public.gmane.org \
--cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.