From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Tripathy Subject: Re: Which Disks can fail? Date: Tue, 21 Jun 2011 16:31:49 +0100 Message-ID: <4E00B965.1030208@abpni.co.uk> References: <4E007154.9030107@abpni.co.uk> <20110621204509.6309c38f@notabene.brown> <4E0078E9.7070208@abpni.co.uk> <20110621214225.5f65ece0@notabene.brown> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20110621214225.5f65ece0@notabene.brown> Sender: linux-raid-owner@vger.kernel.org To: NeilBrown Cc: linux-raid@vger.kernel.org List-Id: linux-raid.ids On 21/06/2011 12:42, NeilBrown wrote: > On Tue, 21 Jun 2011 11:56:41 +0100 Jonathan Tripathy > wrote: > >> On 21/06/2011 11:45, NeilBrown wrote: >>> On Tue, 21 Jun 2011 11:24:20 +0100 Jonathan Tripathy >>> wrote: >>> >>>> Hi Everyone, >>>> >>>> Use md's "single process" RAID10 with the standard near layout (which is >>>> apperently the same as RAID1+0 in industry), which 2 drives could fail >>>> without loosing the array? >>>> >>>> This is what I have: >>>> >>>> Number Major Minor RaidDevice State >>>> 0 8 5 0 active sync /dev/sda5 >>>> 1 8 21 1 active sync /dev/sdb5 >>>> 2 8 37 2 active sync /dev/sdc5 >>>> 3 8 53 3 active sync /dev/sdd5 >>>> >>>> Thanks >>>> -- >>>> To unsubscribe from this list: send the line "unsubscribe linux-raid" in >>>> the body of a message to majordomo@vger.kernel.org >>>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>> Run >>> >>> man 4 md >>> >>> search for "RAID10" >>> >>> read what you find, and if it doesn't make sense, ask again. >>> If it does make sense, post your answer and feel free to ask for >>> confirmation. >>> >>> >>> NeilBrown >> Sorry, it still doesn't make much sense to me I'm afraid. >> >> In fact, it's confused me more - since I'm using "near", does that means >> that the "copy" (I'm using near=2) of a given trunk may lie on the same >> disk, leading to *no redundancy*?? > Clearly I need to improve the man page... (suggestions welcome). > > How do you read it that the copies of a given chunk may lie on the same disk. > I read: > > When 'near' replicas are chosen, the multiple copies of a given chunk > are laid out consecutively across the stripes of the array, so the two > copies of a datablock will likely be at the same offset on two adjacent > devices. > > "laid out consecutively across the stripes of the array" might be a bit > obscure.. A stripe is one chunk on each device, so when chunks a laid out > consecutively across a stripe, they would be one chunk per device. > > Then "likely be at the same offset on two adjacent devices" should make this > clearer. It is only "likely" because if you have an odd number of devices, > then the 2 copies of one chunk could be > a/ at offset X on the last device > b/ at offset X+chunk on the first device > > but in general, they are on "adjacent devices" > > So in answer to your original question, sda5 and sdb5 will have the same > data, and sdc5 and sdd5 will also have the same data. > > NeilBrown > Thanks for your help, Neil :) So, just to confirm 2 drives could fail in my array, as long as the two drives weren't sda5 and sdb5, or sdc5 and sdd5. Is that correct? Thanks