From: Kiran Patil <kiran.patil@intel.com>
To: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: Robert Love <robert.w.love@intel.com>,
linux-scsi@vger.kernel.org,
target-devel <target-devel@vger.kernel.org>
Subject: Re: [PATCH v2 09/12] tcm_fc: Fix ft_send_tm-bug and drop ft_get_lun_for_cmd usage
Date: Wed, 22 Jun 2011 14:38:52 -0700 [thread overview]
Message-ID: <4E0260EC.1090809@intel.com> (raw)
In-Reply-To: <1308767872.19756.225.camel@haakon2.linux-iscsi.org>
Hi Nick,
Good catch and thanks for carefully reviewing this patch. Comments in-line.
On 6/22/2011 11:37 AM, Nicholas A. Bellinger wrote:
> On Mon, 2011-06-20 at 16:59 -0700, Robert Love wrote:
>> From: Kiran Patil<kiran.patil@intel.com>
>>
>> This patch fixes a bug in ft_send_tm() that was incorrectly calling
>> ft_get_lun_for_cmd() -> transport_get_lun_for_cmd(), instead of using
>> transport_get_lun_for_tmr() for the proper struct se_lun lookup.
>>
>> It also drops the now unnecessary ft_get_lun_for_cmd() code, and uses
>> scsilun_to_int() directly ahead of direct transport_get_lun_for_cmd()
>> and transport_get_lun_for_tmr usage().
>>
>> Patch was reworked due to NULL pointer access in function transport_get_lun_for_tmr(),
>> (NOTE: transport_get_lun_for_tmr access tmr_req pointer which caused
>> panic due to NULL pointer access) This patch fixes the issue by re-arranging
>> the codepath where function "transport_get_lun_for_tmr" is called
>> after tmr request is allocated and made it available as part of se_cmd.
>>
>> Signed-off-by: Nicholas A. Bellinger<nab@linux-iscsi.org>
>> Signed-off-by: Kiran Patil<kiran.patil@intel.com>
>> Signed-off-by: Robert Love<robert.w.love@intel.com>
> Hi Robert,
>
> Thanks for the follow up on this. One comment below..
>
>> ---
>> drivers/target/tcm_fc/tcm_fc.h | 2 +
>> drivers/target/tcm_fc/tfc_cmd.c | 62 ++++++++++++++++++++-------------------
>> 2 files changed, 32 insertions(+), 32 deletions(-)
>>
> <SNIP>
>
>> static void ft_queue_cmd(struct ft_sess *sess, struct ft_cmd *cmd)
>> {
>> struct se_queue_obj *qobj;
>> @@ -426,13 +403,6 @@ static void ft_send_tm(struct ft_cmd *cmd)
>> switch (fcp->fc_tm_flags) {
>> case FCP_TMF_LUN_RESET:
>> tm_func = TMR_LUN_RESET;
>> - if (ft_get_lun_for_cmd(cmd, fcp->fc_lun)< 0) {
>> - ft_dump_cmd(cmd, __func__);
>> - transport_send_check_condition_and_sense(&cmd->se_cmd,
>> - cmd->se_cmd.scsi_sense_reason, 0);
>> - ft_sess_put(cmd->sess);
>> - return;
>> - }
>> break;
>> case FCP_TMF_TGT_RESET:
>> tm_func = TMR_TARGET_WARM_RESET;
>> @@ -464,6 +434,35 @@ static void ft_send_tm(struct ft_cmd *cmd)
>> return;
>> }
>> cmd->se_cmd.se_tmr_req = tmr;
>> +
>> + switch (fcp->fc_tm_flags) {
>> + case FCP_TMF_LUN_RESET:
>> + cmd->lun = scsilun_to_int((struct scsi_lun *)fcp->fc_lun);
>> + if (transport_get_lun_for_tmr(&cmd->se_cmd, cmd->lun)< 0) {
>> + /*
>> + * Make sure to clean up newly allocated TMR request
>> + * since "unable to handle TMR request because failed
>> + * to get to LUN"
>> + */
>> + FT_TM_DBG("Failed to get LUN for TMR func %d, "
>> + "se_cmd %p, unpacked_lun %d\n",
>> + tm_func,&cmd->se_cmd, cmd->lun);
>> + transport_generic_free_cmd(&cmd->se_cmd, 0, 1, 0);
>> + ft_dump_cmd(cmd, __func__);
>> + transport_send_check_condition_and_sense(&cmd->se_cmd,
>> + cmd->se_cmd.scsi_sense_reason, 0);
>> + ft_sess_put(cmd->sess);
>> + return;
> This appears to be incorrect as transport_generic_free_cmd() will
> release cmd->se_cmd before transport_send_check_condition_and_sense() is
> called. I think they need to be reversed along the lines of how
> ft_send_cmd() failure cases for -ENOMEM and -EINVAL are handled.
Agree. Fix in progress and shall submit fixed patch soon to address
first comment.
> Here is a patch for lio-core-2.6.git with TCM v4.1 code to address the
> issue, please review and I will plan to respin against mainline and send
> off to Linus for -rc5.
>
> Thanks!
>
> --nab
>
Thanks,
-- Kiran P.
next prev parent reply other threads:[~2011-06-22 21:38 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-20 23:58 [PATCH v2 00/12] libfc, libfcoe and fcoe updates for scsi-misc Robert Love
2011-06-20 23:58 ` [PATCH v2 01/12] tcm_fc: Fix warning in file tfc_io Robert Love
2011-06-20 23:58 ` [PATCH v2 02/12] libfc: Enhancement to RPORT state machine applicable only for VN2VN mode Robert Love
2011-06-20 23:59 ` [PATCH v2 03/12] libfc, tcm_fc: add ddp_targ() to libfc function template to supprot FCoE DDP in target mode Robert Love
2011-06-20 23:59 ` [PATCH v2 04/12] fcoe: support ndo_fcoe_ddp_target() for DDP in FCoE targe Robert Love
2011-06-20 23:59 ` [PATCH v2 05/12] fcoe: Unable to select the exchangeID from offload pool for storage targets Robert Love
2011-06-20 23:59 ` [PATCH v2 06/12] fcoe: Round-robin based selection of CPU for post-processing of incoming commands Robert Love
2011-06-20 23:59 ` [PATCH v2 07/12] fcoe: Amends previous patch, Round-robin based selection of CPU for post processing of incoming request for FCoE target Robert Love
2011-06-20 23:59 ` [PATCH v2 08/12] libfc:Fix for exchange/seq loopup failure when FCoE stack is used as target and connected to windows initaitor Robert Love
2011-06-20 23:59 ` [PATCH v2 09/12] tcm_fc: Fix ft_send_tm-bug and drop ft_get_lun_for_cmd usage Robert Love
2011-06-22 18:37 ` Nicholas A. Bellinger
2011-06-22 21:38 ` Kiran Patil [this message]
2011-06-22 23:30 ` [PATCH] " Kiran Patil
2011-06-23 2:47 ` Nicholas A. Bellinger
2011-06-20 23:59 ` [PATCH v2 10/12] tcm_fc: Fixing reference counting problem which was causing ft_sess to be deleted Robert Love
2011-06-20 23:59 ` [PATCH v2 11/12] libfc: post reset event on lport reset Robert Love
2011-06-20 23:59 ` [PATCH v2 12/12] fcoe: Rearrange fcoe port and NPIV port cleanup Robert Love
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E0260EC.1090809@intel.com \
--to=kiran.patil@intel.com \
--cc=linux-scsi@vger.kernel.org \
--cc=nab@linux-iscsi.org \
--cc=robert.w.love@intel.com \
--cc=target-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.