From mboxrd@z Thu Jan 1 00:00:00 1970 Content-Type: multipart/mixed; boundary="===============9213930282418248229==" MIME-Version: 1.0 From: Denis Kenzior Subject: Re: [HELP] HFP Outgoing Call Method (Dial) Not Responding Date: Fri, 24 Jun 2011 09:43:39 -0500 Message-ID: <4E04A29B.6010302@gmail.com> In-Reply-To: <10D123A956DC4B4FA9D7A48B33358362150C959DA7@INDXM3131.dir.svc.accenture.com> List-Id: To: ofono@ofono.org --===============9213930282418248229== Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Hi Milan, On 06/24/2011 06:27 AM, milan.satpathy(a)accenture.com wrote: > Hi, > = > = > = > Recently I was testing a small hands free use case using Ofono(version > 0.48). > = > = > = > _Scenario_: > = > = > = > 1. Make an incoming call to the remote AG phone number. > 2. Accept the incoming call using Ofono D-BUS call. > 3. Once the incoming call is active, create an outgoing call ( =E2=80= =9CDial=E2=80=9D > ) using Ofono D-BUS call. > = > = > = > _Problem Faced:_ > = > The =E2=80=9CDial=E2=80=9D method does not reply in this case. Hence, the= outgoing call > establishment also does not happen. > = > = > = > _Request For Assistance_: > = > = > = > I would like to know if Ofono supports a multiple call feature like this. > = > = > = > If anybody could succeed in making an outgoing call in the above > explained scenario, > = > please let me know the make of the handset you could test with. > = Placing a Dial with an active call is not always guaranteed to work, particularly on HFP. Many HFP AG implementations are highly buggy. I can't really say more without seeing the AT command trace. Regards, -Denis --===============9213930282418248229==--