All of lore.kernel.org
 help / color / mirror / Atom feed
From: Larry Finger <Larry.Finger@lwfinger.net>
To: LKML <linux-kernel@vger.kernel.org>
Cc: wireless <linux-wireless@vger.kernel.org>,
	Chuck Ebbert <cebbert@redhat.com>
Subject: Possible regression in 3.0-rc4 with RTL8187B
Date: Sat, 25 Jun 2011 10:54:36 -0500	[thread overview]
Message-ID: <4E0604BC.3060002@lwfinger.net> (raw)

While running tests on 3.0-rc4 from the wireless-testing git tree, I tested an 
RTL8187B dongle that had not been used for some time. With it, I got the 
following WARNING:

[291533.186383] ------------[ cut here ]------------
[291533.186438] WARNING: at arch/x86/kernel/dumpstack_64.c:129 
dump_trace+0x292/0x3a0()
[291533.186465] Hardware name: HP Pavilion dv2700 Notebook PC
[291533.186487] Perf: bad frame pointer = 00000000000000cf in callchain
[291533.186511] Modules linked in: loop aes_x86_64 aes_generic arc4 rtl8187 
mac80211 cfg80211 rfkill eeprom_93cx6 vboxnetadp vboxnetflt vboxdrv fuse 
af_packet snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device edd nfs lockd 
auth_rpcgss nfs_acl sunrpc ipv6 cpufreq_conservative cpufreq_userspace 
cpufreq_powersave powernow_k8 mperf ext4 jbd2 crc16 dm_mod ide_cd_mod cdrom 
snd_hda_codec_conexant ide_pci_generic snd_hda_intel snd_hda_codec snd_pcm 
amd74xx snd_timer snd ide_core forcedeth sg k8temp joydev serio_raw soundcore 
snd_page_alloc battery hwmon i2c_nforce2 ac i2c_core video button ext3 jbd 
mbcache sd_mod ohci_hcd ahci libahci libata ehci_hcd scsi_mod usbcore fan 
processor thermal [last unloaded: r8712u]
[291533.186859] Pid: 0, comm: kworker/0:0 Tainted: G         C  3.0.0-rc4-wl+ #22
[291533.186885] Call Trace:
[291533.186900]  <IRQ>  [<ffffffff81048f4a>] warn_slowpath_common+0x7a/0xb0
[291533.186940]  [<ffffffff81049021>] warn_slowpath_fmt+0x41/0x50
[291533.186970]  [<ffffffff8136e9a8>] ? bad_to_user+0x82/0x668
[291533.186997]  [<ffffffff81004be2>] dump_trace+0x292/0x3a0
[291533.187028]  [<ffffffff8100fd3a>] save_stack_trace+0x2a/0x50
[291533.187054]  [<ffffffff811e3a54>] dma_entry_alloc+0x54/0x90
[291533.187080]  [<ffffffff811e3d06>] debug_dma_map_page+0x86/0x160
[291533.187142]  [<ffffffffa00201ed>] usb_hcd_map_urb_for_dma+0x4ed/0x590 [usbcore]
[291533.187195]  [<ffffffffa0020536>] usb_hcd_submit_urb+0xe6/0x6a0 [usbcore]
[291533.187229]  [<ffffffff8107f87d>] ? trace_hardirqs_off+0xd/0x10
[291533.187259]  [<ffffffff8136a9b7>] ? _raw_spin_unlock_irqrestore+0x57/0x70
[291533.187308]  [<ffffffffa00216e9>] usb_submit_urb+0xe9/0x2c0 [usbcore]
[291533.187339]  [<ffffffffa0726315>] rtl8187b_status_cb+0x65/0x150 [rtl8187]
[291533.187386]  [<ffffffffa001f48f>] usb_hcd_giveback_urb+0x5f/0xe0 [usbcore]
[291533.187426]  [<ffffffffa012ff33>] ehci_urb_done+0x83/0xe0 [ehci_hcd]
[291533.187460]  [<ffffffffa0130325>] qh_completions+0x395/0x4c0 [ehci_hcd]
[291533.187495]  [<ffffffffa0132783>] ehci_work+0xe3/0xb40 [ehci_hcd]
[291533.187530]  [<ffffffffa01349cc>] ehci_irq+0x1cc/0x220 [ehci_hcd]
[291533.187560]  [<ffffffff811139cd>] ? dma_pool_alloc+0x1ed/0x330
[291533.187603]  [<ffffffffa001ed30>] usb_hcd_irq+0x40/0xb0 [usbcore]
[291533.187635]  [<ffffffff810afb4d>] handle_irq_event_percpu+0x5d/0x210
[291533.187665]  [<ffffffff810afd43>] handle_irq_event+0x43/0x70
[291533.187693]  [<ffffffff810b22f9>] ? handle_fasteoi_irq+0x19/0xd0
[291533.187722]  [<ffffffff810b2335>] handle_fasteoi_irq+0x55/0xd0
[291533.187750]  [<ffffffff81004834>] handle_irq+0x44/0xa0
[291533.187776]  [<ffffffff81004448>] do_IRQ+0x58/0xe0
[291533.187802]  [<ffffffff8136ac93>] common_interrupt+0x13/0x13
[291533.187829]  [<ffffffff8136a9b7>] _raw_spin_unlock_irqrestore+0x57/0x70
[291533.187861]  [<ffffffffa01af6c4>] ? enc128+0x34f/0x80b [aes_x86_64]
[291533.187974]  [<ffffffffa06bc5ae>] ? ieee80211_aes_ccm_decrypt+0xbe/0x170 
[mac80211]
[291533.188031]  [<ffffffffa06aaf65>] ? 
ieee80211_crypto_ccmp_decrypt+0x1a5/0x230 [mac80211]
[291533.188094]  [<ffffffffa06c18b8>] ? ieee80211_rx_handlers+0x998/0x1fc0 
[mac80211]
[291533.188128]  [<ffffffff812b6036>] ? skb_queue_tail+0x26/0x60
[291533.188156]  [<ffffffff810856fd>] ? trace_hardirqs_on+0xd/0x10
[291533.188211]  [<ffffffffa06c312e>] ? 
ieee80211_prepare_and_rx_handle+0x24e/0x890 [mac80211]
[291533.188274]  [<ffffffffa06c3ad0>] ? ieee80211_rx+0x360/0xb70 [mac80211]
[291533.188330]  [<ffffffffa06c3815>] ? ieee80211_rx+0xa5/0xb70 [mac80211]
[291533.188382]  [<ffffffffa06a5e41>] ? ieee80211_tasklet_handler+0xc1/0xd0 
[mac80211]
[291533.188418]  [<ffffffff8104fb73>] ? tasklet_action+0x73/0x120
[291533.188445]  [<ffffffff810505bd>] ? __do_softirq+0xbd/0x210
[291533.188472]  [<ffffffff8136c6cc>] ? call_softirq+0x1c/0x30
[291533.188499]  [<ffffffff81004915>] ? do_softirq+0x85/0xc0
[291533.188525]  [<ffffffff810509a6>] ? irq_exit+0x96/0xb0
[291533.188550]  [<ffffffff81004451>] ? do_IRQ+0x61/0xe0
[291533.188576]  [<ffffffff8136ac93>] ? common_interrupt+0x13/0x13
[291533.188602] ------------[ cut here ]------------

This problem may be related to
https://bugzilla.kernel.org/show_bug.cgi?id=31012 and its corresponding report 
at http://marc.info/?l=linux-kernel&m=129995721014931&w=2. AFAICT, this 
regression has not been resolved.

As this dongle has not been used in some time, I do not know when the regression 
occurred, but I will do some tests to determine that, and then do a bisection. 
In the meantime, any suggestions regarding this problem would be appreciated.

The problem does not occur for an RTL8187L, thus only part of rtl8187 is affected.

Larry

             reply	other threads:[~2011-06-25 15:54 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-25 15:54 Larry Finger [this message]
2011-06-26  9:41 ` Regression in 3.0-rc4 (actually 2.6.38) Bisected to commit 625dbc3 Larry Finger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4E0604BC.3060002@lwfinger.net \
    --to=larry.finger@lwfinger.net \
    --cc=cebbert@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.