From: Darren Hart <dvhart@linux.intel.com>
To: gmane@reliableembeddedsystems.com
Cc: robertcnelson@gmail.com, Arnd Bergmann <arnd@arndb.de>,
poky@pokylinux.org
Subject: Re: [PATCH] bernard 5.0.1 and beagle-xm rev c
Date: Mon, 27 Jun 2011 15:15:34 -0700 [thread overview]
Message-ID: <4E090106.5080400@linux.intel.com> (raw)
In-Reply-To: <4DFCF6FA.80606@reliableembeddedsystems.com>
Hi Robert,
Thanks for this report.
On 06/18/2011 12:05 PM, Robert Berger wrote:
> From: Robert Berger <gmane@ReliableEmbeddedSystems.com>
>
> I wanted to have bernard-5.0.1 run on my beagle xm rev c before the next
> proper poky release and so I hacked up something quick and dirty which
> is going to be __OBSOLETE__ soon and which is __NOT__ intended to go
> into any proper release.
>
> Anyhow, maybe someone else needs something similar;)
>
> After applying this patch to bernard-5.0.1 you might want to bitbake
> poky-image-minimal-usbutils (which is also part of the patch) as a
> testcase and run lsusb. If everything went well you should see:
>
> root@beagleboard:~# lsusb
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
> Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
>
> I either took [1], [2], [3] unmodified, or added some minor tweaks,
> so the real credits go to Jason Kridner, Koen Kooi and Robert C. Nelson.
>
> [1]
> http://gitorious.org/x-loader/x-loader/commit/2efa178acd56d83c86210b5934895cfb9ea62125
We will need to pull this in prior to 1.1
> [2]
> http://git.denx.de/?p=u-boot.git;a=commitdiff;h=f6e593bb1255d1e15201cb5dec8c95264489e729
We will need to pull this in prior to 1.1. I'd like to pick this up with
a refresh to the 2011.06 release, which should be out shortly.
> [3]
> https://github.com/RobertCNelson/linux-2.6/commit/ebe1e26476768b8edde0607433e564ffd4b0e903
It isn't clear to me where this one fits in. Is this a backport for
linux-2.6.git to 2.6.37 ? It strikes me as odd that there are
Beagleboard specific mainline changes that aren't in linux-omap. That is
the opposite direction I tend to see patches flow.
--
Darren
>
> Signed-off-by: Robert Berger <robert.berger@ReliableEmbeddedSystems.com>
> ---
> .../beagleboard/0001-u-boot-xm-rev-c-support.patch | 114 ++++++++++++++
> meta/recipes-bsp/uboot/u-boot_git.bb | 7 +-
> .../0001-x-loader-xm-rev-c-support.patch | 54 +++++++
> meta/recipes-bsp/x-load/x-load_git.bb | 3 +-
> .../images/poky-image-minimal-usbutils.bb | 6 +
> .../beagleboard/0001-kernel-xm-rev-c-support.patch | 156
> ++++++++++++++++++++
> meta/recipes-kernel/linux/linux-yocto_git.bb | 9 +-
> 7 files changed, 346 insertions(+), 3 deletions(-)
> create mode 100644
> meta/recipes-bsp/uboot/u-boot-git/beagleboard/0001-u-boot-xm-rev-c-support.patch
> create mode 100644
> meta/recipes-bsp/x-load/x-load-git/beagleboard/0001-x-loader-xm-rev-c-support.patch
> create mode 100644 meta/recipes-core/images/poky-image-minimal-usbutils.bb
> create mode 100644
> meta/recipes-kernel/linux/linux-yocto-git/beagleboard/0001-kernel-xm-rev-c-support.patch
>
> diff --git
> a/meta/recipes-bsp/uboot/u-boot-git/beagleboard/0001-u-boot-xm-rev-c-support.patch
> b/meta/recipes-bsp/uboot/u-boot-git/beagleboard/0001-u-boot-xm-rev-c-support.patch
> new file mode 100644
> index 0000000..db79fff
> --- /dev/null
> +++
> b/meta/recipes-bsp/uboot/u-boot-git/beagleboard/0001-u-boot-xm-rev-c-support.patch
> @@ -0,0 +1,114 @@
> +From c505155b127c507cc06ee2dfd48ce8e415353d5e Mon Sep 17 00:00:00 2001
> +From: Robert Berger <robert.berger@ReliableEmbeddedSystems.com>
> +Date: Sat, 18 Jun 2011 16:01:09 +0300
> +Subject: [PATCH] beagle-xm-revc-u-boot-support
> +
> +
> +Signed-off-by: Robert Berger <robert.berger@ReliableEmbeddedSystems.com>
> +---
> + board/ti/beagle/beagle.c | 32 +++++++++++++++++++++++++++-----
> + board/ti/beagle/beagle.h | 4 +++-
> + include/configs/omap3_beagle.h | 2 +-
> + 3 files changed, 31 insertions(+), 7 deletions(-)
> +
> +diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
> +index c066d6e..9939e1e 100644
> +--- a/board/ti/beagle/beagle.c
> ++++ b/board/ti/beagle/beagle.c
> +@@ -153,18 +153,15 @@ int misc_init_r(void)
> + case REVISION_AXBX:
> + printf("Beagle Rev Ax/Bx\n");
> + setenv("beaglerev", "AxBx");
> +- setenv("mpurate", "600");
> + break;
> + case REVISION_CX:
> + printf("Beagle Rev C1/C2/C3\n");
> + setenv("beaglerev", "Cx");
> +- setenv("mpurate", "600");
> + MUX_BEAGLE_C();
> + break;
> + case REVISION_C4:
> + printf("Beagle Rev C4\n");
> + setenv("beaglerev", "C4");
> +- setenv("mpurate", "720");
> + MUX_BEAGLE_C();
> + /* Set VAUX2 to 1.8V for EHCI PHY */
> + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
> +@@ -172,10 +169,19 @@ int misc_init_r(void)
> + TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
> + TWL4030_PM_RECEIVER_DEV_GRP_P1);
> + break;
> +- case REVISION_XM:
> ++ case REVISION_XM_A:
> + printf("Beagle xM Rev A\n");
> + setenv("beaglerev", "xMA");
> +- setenv("mpurate", "1000");
> ++ MUX_BEAGLE_XM();
> ++ /* Set VAUX2 to 1.8V for EHCI PHY */
> ++
> twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
> ++ TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
> ++ TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
> ++ TWL4030_PM_RECEIVER_DEV_GRP_P1);
> ++ break;
> ++ case REVISION_XM_B:
> ++ printf("Beagle xM Rev B\n");
> ++ setenv("beaglerev", "xMB");
> + MUX_BEAGLE_XM();
> + /* Set VAUX2 to 1.8V for EHCI PHY */
> + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
> +@@ -183,8 +189,24 @@ int misc_init_r(void)
> + TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
> + TWL4030_PM_RECEIVER_DEV_GRP_P1);
> + break;
> ++ case REVISION_XM_C:
> ++ printf("Beagle xM Rev C\n");
> ++ setenv("beaglerev", "xMC");
> ++ MUX_BEAGLE_XM();
> ++ /* Set VAUX2 to 1.8V for EHCI PHY */
> ++
> twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
> ++ TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
> ++ TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
> ++ TWL4030_PM_RECEIVER_DEV_GRP_P1);
> ++ break;
> + default:
> + printf("Beagle unknown 0x%02x\n", get_board_revision());
> ++ MUX_BEAGLE_XM();
> ++ /* Set VAUX2 to 1.8V for EHCI PHY */
> ++
> twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
> ++ TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
> ++ TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
> ++ TWL4030_PM_RECEIVER_DEV_GRP_P1);
> + }
> +
> + switch (get_expansion_id()) {
> +diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
> +index b22b653..59edd0c 100644
> +--- a/board/ti/beagle/beagle.h
> ++++ b/board/ti/beagle/beagle.h
> +@@ -37,7 +37,9 @@ const omap3_sysinfo sysinfo = {
> + #define REVISION_AXBX 0x7
> + #define REVISION_CX 0x6
> + #define REVISION_C4 0x5
> +-#define REVISION_XM 0x0
> ++#define REVISION_XM_A 0x0
> ++#define REVISION_XM_B 0x1
> ++#define REVISION_XM_C 0x2
> +
> + /*
> + * IEN - Input Enable
> +diff --git a/include/configs/omap3_beagle.h
> b/include/configs/omap3_beagle.h
> +index 5cfa4cb..bee0e41 100644
> +--- a/include/configs/omap3_beagle.h
> ++++ b/include/configs/omap3_beagle.h
> +@@ -190,7 +190,7 @@
> + "loadaddr=0x82000000\0" \
> + "usbtty=cdc_acm\0" \
> + "console=ttyS2,115200n8\0" \
> +- "mpurate=500\0" \
> ++ "mpurate=auto\0" \
> + "vram=12M\0" \
> + "dvimode=1024x768MR-16@60\0" \
> + "defaultdisplay=dvi\0" \
> +--
> +1.7.1
> +
> diff --git a/meta/recipes-bsp/uboot/u-boot_git.bb
> b/meta/recipes-bsp/uboot/u-boot_git.bb
> index 4c8f5df..a6d6bd3 100644
> --- a/meta/recipes-bsp/uboot/u-boot_git.bb
> +++ b/meta/recipes-bsp/uboot/u-boot_git.bb
> @@ -8,10 +8,15 @@ FILESDIR =
> "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/u-boot-git/${MACHINE
>
> SRCREV = "v2011.03"
> PV = "v2011.03+git${SRCPV}"
> -PR="r3"
> +PR="r4"
>
> SRC_URI = "git://git.denx.de/u-boot.git;branch=master;protocol=git"
>
> +# patch for beagle-xm rev c
> +SRC_URI_append_beagleboard = " \
> +
> file://0001-u-boot-xm-rev-c-support.patch;patch=1 \
> + "
> +
> UBOOT_MACHINE_beagleboard = "omap3_beagle_config"
> UBOOT_MACHINE_overo = "omap3_overo_config"
>
> diff --git
> a/meta/recipes-bsp/x-load/x-load-git/beagleboard/0001-x-loader-xm-rev-c-support.patch
> b/meta/recipes-bsp/x-load/x-load-git/beagleboard/0001-x-loader-xm-rev-c-support.patch
> new file mode 100644
> index 0000000..91d1d7a
> --- /dev/null
> +++
> b/meta/recipes-bsp/x-load/x-load-git/beagleboard/0001-x-loader-xm-rev-c-support.patch
> @@ -0,0 +1,54 @@
> +From cb8f553a1df59cbdd1fbd4957b4404d72a557e3c Mon Sep 17 00:00:00 2001
> +From: Robert Berger <robert.berger@ReliableEmbeddedSystems.com>
> +Date: Fri, 17 Jun 2011 18:13:51 +0300
> +Subject: [PATCH] x-loader-xm-rev-c-support
> +
> +
> +Signed-off-by: Robert Berger <robert.berger@ReliableEmbeddedSystems.com>
> +---
> + board/omap3530beagle/omap3530beagle.c | 15 ++++++++++++++-
> + 1 files changed, 14 insertions(+), 1 deletions(-)
> +
> +diff --git a/board/omap3530beagle/omap3530beagle.c
> b/board/omap3530beagle/omap3530beagle.c
> +index 073e35a..51bcc40 100644
> +--- a/board/omap3530beagle/omap3530beagle.c
> ++++ b/board/omap3530beagle/omap3530beagle.c
> +@@ -212,6 +212,7 @@ u32 cpu_is_3410(void)
> + * GPIO173, GPIO172, GPIO171: 1 1 0 => C1/2/3
> + * GPIO173, GPIO172, GPIO171: 1 0 1 => C4
> + * GPIO173, GPIO172, GPIO171: 0 0 0 => XM
> ++ * default => XM
> + ******************************************/
> + int beagle_revision(void)
> + {
> +@@ -227,6 +228,18 @@ int beagle_revision(void)
> + rev = omap_get_gpio_datain(173) << 2 |
> + omap_get_gpio_datain(172) << 1 |
> + omap_get_gpio_datain(171);
> ++
> ++ /* Default newer board revisions to XM */
> ++ switch(rev) {
> ++ case REVISION_AXBX:
> ++ case REVISION_CX:
> ++ case REVISION_C4:
> ++ break;
> ++ case REVISION_XM:
> ++ default:
> ++ rev = REVISION_XM;
> ++ }
> ++
> + omap_free_gpio(171);
> + omap_free_gpio(172);
> + omap_free_gpio(173);
> +@@ -690,7 +703,7 @@ int misc_init_r(void)
> + printf("Beagle Rev C4\n");
> + break;
> + case REVISION_XM:
> +- printf("Beagle xM Rev A\n");
> ++ printf("Beagle xM\n");
> + break;
> + default:
> + printf("Beagle unknown 0x%02x\n", rev);
> +--
> +1.7.1
> +
> diff --git a/meta/recipes-bsp/x-load/x-load_git.bb
> b/meta/recipes-bsp/x-load/x-load_git.bb
> index fc2927e..05f48a9 100644
> --- a/meta/recipes-bsp/x-load/x-load_git.bb
> +++ b/meta/recipes-bsp/x-load/x-load_git.bb
> @@ -6,7 +6,7 @@ LICENSE = "GPLv2+"
> LIC_FILES_CHKSUM =
> "file://README;beginline=1;endline=25;md5=ef08d08cb99057bbb5b9d6d0c5a4396f"
>
> PV = "1.42+${PR}+git${SRCPV}"
> -PR="r13"
> +PR="r14"
>
> #SRC_URI =
> "git://www.sakoman.net/git/x-load-omap3.git;branch=master;protocol=git"
> #SRC_URI =
> "git://gitorious.org/x-load-omap3/mainline.git;branch=master;protocol=git"
> @@ -14,6 +14,7 @@ SRC_URI =
> "git://gitorious.org/x-loader/x-loader.git;branch=master;protocol=git"
>
> SRC_URI_append_beagleboard = " \
> file://name.patch;patch=1 \
> +
> file://0001-x-loader-xm-rev-c-support.patch;patch=2 \
> "
> S = "${WORKDIR}/git"
>
> diff --git a/meta/recipes-core/images/poky-image-minimal-usbutils.bb
> b/meta/recipes-core/images/poky-image-minimal-usbutils.bb
> new file mode 100644
> index 0000000..3c54de2
> --- /dev/null
> +++ b/meta/recipes-core/images/poky-image-minimal-usbutils.bb
> @@ -0,0 +1,6 @@
> +#
> +# Copyright (C) 2008 OpenedHand Ltd.
> +#
> +require poky-image-minimal.bb
> +
> +IMAGE_INSTALL += "usbutils"
> diff --git
> a/meta/recipes-kernel/linux/linux-yocto-git/beagleboard/0001-kernel-xm-rev-c-support.patch
> b/meta/recipes-kernel/linux/linux-yocto-git/beagleboard/0001-kernel-xm-rev-c-support.patch
> new file mode 100644
> index 0000000..a42bbf8
> --- /dev/null
> +++
> b/meta/recipes-kernel/linux/linux-yocto-git/beagleboard/0001-kernel-xm-rev-c-support.patch
> @@ -0,0 +1,156 @@
> +From 828220f35f2777b33295b3d7d65826b65fed9230 Mon Sep 17 00:00:00 2001
> +From: Robert Berger <robert.berger@ReliableEmbeddedSystems.com>
> +Date: Fri, 17 Jun 2011 18:30:15 +0300
> +Subject: [PATCH] kernel-xm-rev-c-support
> +
> +
> +Signed-off-by: Robert Berger <robert.berger@ReliableEmbeddedSystems.com>
> +---
> + arch/arm/mach-omap2/board-omap3beagle.c | 79
> ++++++++++++++++++++++++++++---
> + 1 files changed, 72 insertions(+), 7 deletions(-)
> +
> +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c
> b/arch/arm/mach-omap2/board-omap3beagle.c
> +index 02a3469..694e6e2 100644
> +--- a/arch/arm/mach-omap2/board-omap3beagle.c
> ++++ b/arch/arm/mach-omap2/board-omap3beagle.c
> +@@ -58,7 +58,9 @@
> + * AXBX = GPIO173, GPIO172, GPIO171: 1 1 1
> + * C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0
> + * C4 = GPIO173, GPIO172, GPIO171: 1 0 1
> +- * XM = GPIO173, GPIO172, GPIO171: 0 0 0
> ++ * XMA = GPIO173, GPIO172, GPIO171: 0 0 0
> ++ * XMB = GPIO173, GPIO172, GPIO171: 0 0 1
> ++ * XMC = GPIO173, GPIO172, GPIO171: 0 1 0
> + */
> + enum {
> + OMAP3BEAGLE_BOARD_UNKN = 0,
> +@@ -66,6 +68,7 @@ enum {
> + OMAP3BEAGLE_BOARD_C1_3,
> + OMAP3BEAGLE_BOARD_C4,
> + OMAP3BEAGLE_BOARD_XM,
> ++ OMAP3BEAGLE_BOARD_XMC,
> + };
> +
> + static u8 omap3_beagle_version;
> +@@ -120,9 +123,17 @@ static void __init omap3_beagle_init_rev(void)
> + printk(KERN_INFO "OMAP3 Beagle Rev: xM\n");
> + omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
> + break;
> ++ case 1:
> ++ pr_info("OMAP3 Beagle Rev: xM B\n");
> ++ omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
> ++ break;
> ++ case 2:
> ++ pr_info("OMAP3 Beagle Rev: xM C\n");
> ++ omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
> ++ break;
> + default:
> +- printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
> +- omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
> ++ pr_info("OMAP3 Beagle Rev: unknown %hd, assuming xM C or newer\n",
> beagle_rev);
> ++ omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
> + }
> +
> + return;
> +@@ -273,13 +284,17 @@ static struct gpio_led gpio_leds[];
> + static int beagle_twl_gpio_setup(struct device *dev,
> + unsigned gpio, unsigned ngpio)
> + {
> +- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
> ++ int r;
> ++
> ++ if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) ||
> ++ (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XMC)) {
> + mmc[0].gpio_wp = -EINVAL;
> + } else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) ||
> + (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) {
> + omap_mux_init_gpio(23, OMAP_PIN_INPUT);
> + mmc[0].gpio_wp = 23;
> + } else {
> ++ mmc[0].gpio_wp = 29;
> + omap_mux_init_gpio(29, OMAP_PIN_INPUT);
> + }
> + /* gpio + 0 is "mmc0_cd" (input/IRQ) */
> +@@ -294,9 +309,17 @@ static int beagle_twl_gpio_setup(struct device *dev,
> + * power switch and overcurrent detect
> + */
> +
> +- gpio_request(gpio + 1, "EHCI_nOC");
> +- gpio_direction_input(gpio + 1);
> +-
> ++ if ((omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XM) &&
> ++ (omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XMC)) {
> ++ r = gpio_request(gpio + 1, "EHCI_nOC");
> ++ if (!r) {
> ++ r = gpio_direction_input(gpio + 1);
> ++ if (r)
> ++ gpio_free(gpio + 1);
> ++ }
> ++ if (r)
> ++ pr_err("%s: unable to configure EHCI_nOC\n", __func__);
> ++ }
> + /*
> + * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
> + * high / others active low)
> +@@ -307,9 +330,44 @@ static int beagle_twl_gpio_setup(struct device *dev,
> + else
> + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
> +
> ++ /* DVI reset GPIO is different between beagle revisions */
> ++ if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) ||
> ++ (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XMC))
> ++ beagle_dvi_device.reset_gpio = 129;
> ++ else
> ++ beagle_dvi_device.reset_gpio = 170;
> ++
> + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
> + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
> +
> ++ /*
> ++ * gpio + 1 on Xm controls the TFP410's enable line (active low)
> ++ * gpio + 2 control varies depending on the board rev as follows:
> ++ * P7/P8 revisions(prototype): Camera EN
> ++ * A2+ revisions (production): LDO (supplies DVI, serial, led blocks)
> ++ */
> ++ if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) ||
> ++ (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XMC)) {
> ++ r = gpio_request(gpio + 1, "nDVI_PWR_EN");
> ++ if (!r) {
> ++ r = gpio_direction_output(gpio + 1, 0);
> ++ if (r)
> ++ gpio_free(gpio + 1);
> ++ }
> ++ if (r)
> ++ pr_err("%s: unable to configure nDVI_PWR_EN\n",
> ++ __func__);
> ++ r = gpio_request(gpio + 2, "DVI_LDO_EN");
> ++ if (!r) {
> ++ r = gpio_direction_output(gpio + 2, 1);
> ++ if (r)
> ++ gpio_free(gpio + 2);
> ++ }
> ++ if (r)
> ++ pr_err("%s: unable to configure DVI_LDO_EN\n",
> ++ __func__);
> ++ }
> ++
> + return 0;
> + }
> +
> +@@ -569,6 +627,13 @@ static void __init omap3_beagle_init(void)
> + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
> + omap3_beagle_init_rev();
> + omap3_beagle_i2c_init();
> ++
> ++ /* xM version uses pin 4 instead of 7 for user button */
> ++ if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) ||
> ++ (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XMC)){
> ++ gpio_buttons[0].gpio = 4;
> ++ }
> ++
> + platform_add_devices(omap3_beagle_devices,
> + ARRAY_SIZE(omap3_beagle_devices));
> + omap_serial_init();
> +--
> +1.7.1
> +
> diff --git a/meta/recipes-kernel/linux/linux-yocto_git.bb
> b/meta/recipes-kernel/linux/linux-yocto_git.bb
> index 38fbba3..65a4333 100644
> --- a/meta/recipes-kernel/linux/linux-yocto_git.bb
> +++ b/meta/recipes-kernel/linux/linux-yocto_git.bb
> @@ -1,6 +1,8 @@
> inherit kernel
> require linux-yocto.inc
>
> +FILESDIR =
> "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/linux-yocto-git/${MACHINE}"
> +
> KMACHINE = "yocto/standard/base"
> KMACHINE_qemux86 = "yocto/standard/common-pc/base"
> KMACHINE_qemux86-64 = "yocto/standard/common-pc-64/base"
> @@ -17,12 +19,17 @@ KMETA = meta
>
> LINUX_VERSION ?= "2.6.37"
> LINUX_VERSION_EXTENSION ?= "-yocto-${LINUX_KERNEL_TYPE}"
> -PR = "r16"
> +PR = "r17"
> PV = "${LINUX_VERSION}+git${SRCPV}"
> SRCREV_FORMAT = "meta_machine"
>
> SRC_URI =
> "git://git.pokylinux.org/linux-yocto-2.6.37;protocol=git;nocheckout=1;branch=${KBRANCH},meta;name=machine,meta"
>
> +# patch for beagle-xm rev c
> +SRC_URI_append_beagleboard = " \
> +
> file://0001-kernel-xm-rev-c-support.patch;patch=1 \
> + "
> +
> COMPATIBLE_MACHINE =
> "(qemuarm|qemux86|qemuppc|qemumips|qemux86-64|mpc8315e-rdb|routerstationpro|beagleboard)"
>
> # Functionality flags
> -- 1.7.1
>
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
next prev parent reply other threads:[~2011-06-27 22:15 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-14 21:13 bernard 5.0.1 and beagle-xm rev c Robert Berger
2011-06-15 1:31 ` Darren Hart
2011-06-15 11:01 ` Robert Berger
2011-06-15 11:46 ` Robert Berger
2011-06-15 16:38 ` Darren Hart
2011-06-15 17:18 ` Robert Berger
2011-06-15 23:36 ` Darren Hart
2011-06-16 1:32 ` Jason Kridner
[not found] ` <4DFA2189.7020804@ahsoftware.de>
2011-06-16 17:48 ` Darren Hart
2011-06-15 18:26 ` Jason Kridner
2011-06-15 19:05 ` Robert Berger
2011-06-15 20:43 ` Jason Kridner
2011-06-18 19:05 ` [PATCH] " Robert Berger
2011-06-27 22:15 ` Darren Hart [this message]
2011-06-28 4:43 ` Robert Berger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E090106.5080400@linux.intel.com \
--to=dvhart@linux.intel.com \
--cc=arnd@arndb.de \
--cc=gmane@reliableembeddedsystems.com \
--cc=poky@pokylinux.org \
--cc=robertcnelson@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.