From: Alex Waterman <awaterman@dawning.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Is somebody workin on getting the AT91SAM9G45EKES working on the latest build?
Date: Fri, 01 Jul 2011 09:15:12 -0400 [thread overview]
Message-ID: <4E0DC860.2050904@dawning.com> (raw)
In-Reply-To: <657FC3AB549C7F4DB01F4397232ED733A2DACD736C@Exchange2007.techatl.com>
Bill,
On 06/30/2011 04:54 PM, William C. Landolina wrote:
> I start with Atmel's vanilla first stage boot from NAND. I have a much hacked SDCard boot that works as well and that is where I want to head. My target systems do not have NAND or Dataflash. (I can put NAND on my boards for development but I do not want to ship with NAND.)
I see. I have not tried any of the MMC u-boot stuff for my board (a
sam9m10g45ek).
> I hacked the December release to work, but I know I did some things in the wrong places and in a style that is not Wolfgang-compatible. I stopped working on improving the December release because it was clear that a lot of good things were happening to the MMC framework and the underlying AT91 framework was in flux so it seemed like a good idea to wait until that stabilized before I revisit putting a modern U-Boot on my boards "the right way".
Ahh, Wolfgang compatible :). I still haven't really figured out exactly what is
actually correct with the AT91 framework code yet. I just started playing with
this a few weeks ago. There was a patch a little which back which was the
reference implementation for the AT91 framework, but I could not find it when I
searched my mail box.
> I only have one bank of RAM on my custom target so I didn't test the second bank. On my targets the other EBI interface runs a bunch of slow peripherals.
Ah, so dual RAM is no matter for you.
Which config header are you using? Naturally, I am using the sam9m10g45ek
header, but since you have a slightly different board, which doesn't
appear to have a header, how did you proceed?
Best regards,
Alex
--
Alex Waterman
Computer Engineer
Phone: 215-896-4920
Email: awaterman at dawning.com
next prev parent reply other threads:[~2011-07-01 13:15 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-29 22:47 [U-Boot] Is somebody workin on getting the AT91SAM9G45EKES working on the latest build? William C. Landolina
2011-06-30 12:32 ` Alex Waterman
2011-06-30 13:12 ` Albert ARIBAUD
2011-06-30 20:01 ` Alex Waterman
2011-06-30 19:14 ` [U-Boot] [PATCH 0/8] Fixes compilation for the at91sam9m10g45ek Alex.Waterman.awaterman at dawning.com
2011-06-30 19:14 ` [U-Boot] [PATCH 1/8] Remove old config stuff from Makefile Alex.Waterman.awaterman at dawning.com
2011-06-30 19:14 ` [U-Boot] [PATCH 2/8] Update at91sam9m10g45_devices.c to fix compile errors Alex.Waterman.awaterman at dawning.com
2011-06-30 19:14 ` [U-Boot] [PATCH 3/8] Fix compile problem for some boards in the clock code Alex.Waterman.awaterman at dawning.com
2011-06-30 19:14 ` [U-Boot] [PATCH 4/8] Updates the at91sam9mg45_matrix.h header to new defines Alex.Waterman.awaterman at dawning.com
2011-06-30 19:14 ` [U-Boot] [PATCH 5/8] Updates the board specific files for the at91sam9mg45ek Alex.Waterman.awaterman at dawning.com
2011-06-30 19:14 ` [U-Boot] [PATCH 6/8] Adds wait to atmel_usart serial_init function Alex.Waterman.awaterman at dawning.com
2011-06-30 19:14 ` [U-Boot] [PATCH 7/8] Updates the at91sam9m10g45ek.h config file Alex.Waterman.awaterman at dawning.com
2011-06-30 19:14 ` [U-Boot] [PATCH 8/8] Updates the boards.cfg file Alex.Waterman.awaterman at dawning.com
[not found] ` <657FC3AB549C7F4DB01F4397232ED733A2DACD735E@Exchange2007.techatl.com>
2011-06-30 19:32 ` [U-Boot] Is somebody workin on getting the AT91SAM9G45EKES working on the latest build? Alex Waterman
2011-06-30 20:54 ` William C. Landolina
2011-07-01 13:15 ` Alex Waterman [this message]
2011-07-01 19:37 ` William C. Landolina
2011-06-30 19:32 ` [U-Boot] [PATCH 0/8] Fixes compilation for the at91sam9m10g45ek Alex Waterman
2011-06-30 19:33 ` [U-Boot] [PATCH 1/8] Remove old config stuff from Makefile Alex Waterman
2011-06-30 19:33 ` [U-Boot] [PATCH 2/8] Update at91sam9m10g45_devices.c to fix compile errors Alex Waterman
2011-07-04 7:35 ` Reinhard Meyer
2011-06-30 19:33 ` [U-Boot] [PATCH 3/8] Fix compile problem for some boards in the clock code Alex Waterman
2011-07-04 7:37 ` Reinhard Meyer
2011-06-30 19:33 ` [U-Boot] [PATCH 4/8] Updates the at91sam9mg45_matrix.h header to new defines Alex Waterman
2011-06-30 19:33 ` [U-Boot] [PATCH 5/8] Updates the board specific files for the at91sam9mg45ek Alex Waterman
2011-06-30 19:33 ` [U-Boot] [PATCH 6/8] Adds wait to atmel_usart serial_init function Alex Waterman
2011-07-01 12:03 ` Sergei Shtylyov
2011-07-01 12:37 ` Alex Waterman
2011-07-01 15:17 ` Albert ARIBAUD
2011-07-04 7:42 ` Reinhard Meyer
2011-06-30 19:33 ` [U-Boot] [PATCH 7/8] Updates the at91sam9m10g45ek.h config file Alex Waterman
2011-07-04 7:50 ` Reinhard Meyer
2011-06-30 19:33 ` [U-Boot] [PATCH 8/8] Updates the boards.cfg file Alex Waterman
2011-07-04 7:52 ` Reinhard Meyer
2011-08-02 8:19 ` [U-Boot] [PATCH 0/8] Fixes compilation for the at91sam9m10g45ek Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E0DC860.2050904@dawning.com \
--to=awaterman@dawning.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.