Re: [RFC][NET-NEXT PATCH 2/2] net: Add GSO to vlan_features initialization

[Shan Wei <shanwei@cn.fujitsu.com>]

Hi Ben:

Shan Wei wrote, at 06/28/2011 11:47 AM:
> Hi Ben:
> 
> Ben Hutchings wrote, at 06/25/2011 12:51 AM:
>> Have you verified that GSO works correctly for VLAN devices if the
>> underlying device does not support VLAN tag insertion?
> 
> OK. I will do some test in future days.
> Then report test results.

Results is coming....
GSO works correctly for VLAN devices when
underlying device is Realtek NIC with 8139too driver.

Network tracepoint shows as following:
<Begin:
       tcpclient-5915  [000]  2114.246780: net_dev_queue: dev=eth1.44 skbaddr=f3051bc0 len=74
       tcpclient-5915  [000]  2114.246790: net_dev_queue: dev=eth1 skbaddr=f3051bc0 len=74
       tcpclient-5915  [000]  2114.246798: net_dev_xmit: dev=eth1 skbaddr=f3051bc0 len=78 rc=0
       tcpclient-5915  [000]  2114.246799: net_dev_xmit: dev=eth1.44 skbaddr=f3051bc0 len=74 rc=0
          <idle>-0     [000]  2114.246905: net_dev_queue: dev=eth1.44 skbaddr=f73cc480 len=66
          <idle>-0     [000]  2114.246908: net_dev_queue: dev=eth1 skbaddr=f73cc480 len=66
          <idle>-0     [000]  2114.246911: net_dev_xmit: dev=eth1 skbaddr=f73cc480 len=70 rc=0
          <idle>-0     [000]  2114.246912: net_dev_xmit: dev=eth1.44 skbaddr=f73cc480 len=66 rc=0
       tcpclient-5915  [000]  2114.247109: net_dev_queue: dev=eth1.44 skbaddr=f3051bc0 len=2962
       tcpclient-5915  [000]  2114.247121: net_dev_queue: dev=eth1 skbaddr=f73cc380 len=1514
       tcpclient-5915  [000]  2114.247130: net_dev_xmit: dev=eth1 skbaddr=f73cc380 len=1518 rc=0
       tcpclient-5915  [000]  2114.247131: net_dev_xmit: dev=eth1.44 skbaddr=f73cc380 len=1514 rc=0
       tcpclient-5915  [000]  2114.247132: net_dev_queue: dev=eth1 skbaddr=f73cc480 len=1514
       tcpclient-5915  [000]  2114.247138: net_dev_xmit: dev=eth1 skbaddr=f73cc480 len=1518 rc=0
       tcpclient-5915  [000]  2114.247139: net_dev_xmit: dev=eth1.44 skbaddr=f73cc480 len=1514 rc=0
end:>

But, test case requires following two patches:
1. Fix broken vlan GSO setting

[PATCH 1/2] net: vlan: enable GSO by default
http://patchwork.ozlabs.org/patch/101714/

2. Fix my 8139too NIC driver that does not initial vlan_features.
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -993,6 +993,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
         * features
         */
        dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
+       dev->vlan_features = dev->features;

-- 
Best Regards
-----
Shan Wei