W dniu 02.07.2011 00:37, Julian Sikorski pisze:
> W dniu 2011-07-02 00:09, Julian Sikorski pisze:
>> W dniu 01.07.2011 09:14, Takashi Iwai pisze:
>>> At Fri, 01 Jul 2011 09:07:47 +0200,
>>> Julian Sikorski wrote:
>>>>
>>>>>>>>> So it seems that the only things remaining are the SPDIF/rear
>>>>>>>>> channel
>>>>>>>>> jack and the coupled muting issue.
>>>>>>>>
>>>>>>>> It's a BIOS bug.  It doesn't tell SPDIF is available.
>>>>>>>> Ditto for the 4th stereo out.  No pin is exposed by BIOS.
>>>>>>>
>>>>>>> I see. I can try updating the BIOS and see if it changes
>>>>>>> anything. If it
>>>>>>> doesn't, is there a way to work the problem around in the driver?
>>>>>>
>>>>>> You need to figure out pins manually by yourself, then change the
>>>>>> driver code.  I leave it as a homework :)
>>>>>
>>>>> :) I cannot write code, so I would not count on myself doing that. I
>>>>> will have a look into updating the BIOS though.
>>>>>
>>>>>> thanks,
>>>>>>
>>>>>> Takashi
>>>>>
>>>>> Once again thanks for all the work you have done,
>>>>>
>>>>> Julian
>>>> Hmm, I googled a bit and it seems the way to find the pins is to write
>>>> values to user_pin_configs. So no coding knowledge seems needed, could
>>>> you give me some pointers on where to start?
>>>
>>> First off, read the HD-audio specification to understand what the values
>>> represent.  Then, use hda-analyzer or manually via hda-verb, figure out
>>> which widget corresponds to which I/O jack.  Compose the corresponding
>>> pin-config value, and put it to the sysfs file.  A brief description
>>> is found in Documentation/sound/alsa/HD-Audio.txt.
>>>
>>>
>>> Takashi
>> I have been scratching my head for almost 2 h now without much progress.
>> Can I steal this values from Windows driver somehow? It seems to be
>> possible:
>>
>> http://www.insanelymac.com/forum/index.php?s=3298551705d0d48ba8faa28b9a7d3283&showtopic=137188&st=20
>>
>>
>> Julian
> I managed to get the data out of Windows install, does it look useful?
> 
> Julian
> 
I managed to figure out which ini file is used for my device, I am
attaching both the 32- and 64-bit versions. Hopefully there is some
useful info inside.

Julian