[PATCH] ARM: cns3xxx: Add support for L2 Cache Controller

[robherring2@gmail.com (Rob Herring)]

On 07/06/2011 09:08 AM, Anton Vorontsov wrote:
> CNS3xxx SOCs have L310-compatible cache controller, so let's use it.
> 
> With this patch benchmarking with 'gzip' shows that performance is
> doubled, and I'm still able to boot full-fledged userland over NFS
> (using PCIe NIC), so the support should be pretty robust.
> 
> Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
> ---
> 
> I'm going to apply it to linux-cns3xxx.git tree and push it (via Arnd)
> for v3.1 , if there will be no complains, of course.
> 
> Thanks,
> 
>  arch/arm/mach-cns3xxx/cns3420vb.c |    2 +
>  arch/arm/mach-cns3xxx/core.c      |   39 +++++++++++++++++++++++++++++++++++++
>  arch/arm/mach-cns3xxx/core.h      |    1 +
>  arch/arm/mm/Kconfig               |    2 +-
>  4 files changed, 43 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
> index 08e5c87..4b804ba 100644
> --- a/arch/arm/mach-cns3xxx/cns3420vb.c
> +++ b/arch/arm/mach-cns3xxx/cns3420vb.c
> @@ -170,6 +170,8 @@ static struct platform_device *cns3420_pdevs[] __initdata = {
>  
>  static void __init cns3420_init(void)
>  {
> +	cns3xxx_l2x0_init();
> +
>  	platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
>  
>  	cns3xxx_ahci_init();
> diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
> index da30078..49f3a51 100644
> --- a/arch/arm/mach-cns3xxx/core.c
> +++ b/arch/arm/mach-cns3xxx/core.c
> @@ -16,6 +16,7 @@
>  #include <asm/mach/time.h>
>  #include <asm/mach/irq.h>
>  #include <asm/hardware/gic.h>
> +#include <asm/hardware/cache-l2x0.h>
>  #include <mach/cns3xxx.h>
>  #include "core.h"
>  
> @@ -244,3 +245,41 @@ static void __init cns3xxx_timer_init(void)
>  struct sys_timer cns3xxx_timer = {
>  	.init = cns3xxx_timer_init,
>  };
> +
> +void __init cns3xxx_l2x0_init(void)
> +{
> +	void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
> +	u32 val;
> +
> +	if (WARN_ON(!base))
> +		return;
> +
> +	/*
> +	 * Tag RAM Control register
> +	 *
> +	 * bit[10:8]	- 1 cycle of write accesses latency
> +	 * bit[6:4]	- 1 cycle of read accesses latency
> +	 * bit[3:0]	- 1 cycle of setup latency
> +	 *
> +	 * 1 cycle of latency for setup, read and write accesses
> +	 */
> +	val = readl(base + L2X0_TAG_LATENCY_CTRL);
> +	val &= 0xfffff888;
> +	writel(val, base + L2X0_TAG_LATENCY_CTRL);
> +
> +	/*
> +	 * Data RAM Control register
> +	 *
> +	 * bit[10:8]	- 1 cycles of write accesses latency
> +	 * bit[6:4]	- 1 cycles of read accesses latency
> +	 * bit[3:0]	- 1 cycle of setup latency
> +	 *
> +	 * 1 cycle of setup latency, 2 cycles of read and write accesses latency
> +	 */
> +	val = readl(base + L2X0_DATA_LATENCY_CTRL);
> +	val &= 0xfffff888;

You're missing a "val |= 0x110" or your comment is wrong.

Rob